Susanne Norgren

Susanne is involved in research on powder metallurgy and sintering of hard metals and diamond materials, especially in metal cutting and rock drilling applications. Here the tribological degradation and coupling between material performance and properties is very important. Her research includes thermodynamic modeling and coupling between atomistic calculations and thermodynamics and kinetics, often applied to practical experiences. 

She is member of several technical program committees, for example the World Powder Metallurgy Conference 2018, European Powder Metallurgy Conference, Nordtrib, Euromat 2019, ICSHM 2019, CALPHAD2020.  She has been invited lecturer to the Advanced Manufacturing Research Centre (AMRC), UK, IVA, and Keynote speaker at Euromat and European Powder metallurgy conference, to mention a few. 

Currently she is Chairman of the board of directors for the Hero.M2i Vinn-excellence center and Senior advisor to the Competence center ADDLIFE. She is Member of the board of directors in the foundation for applied thermodynamics and fellow of The Getman Robert Bosch Stiftung Academianet for Outstanding female researchers - nominated by the Swedish research council. She is a fellow of the Royal Swedish Academy of Engineering Sciences.

She holds a Docent and Ph.D. from Royal Institute of Technology, KTH. Since 2011 she is adjunct Professor (20%) at the Tribomaterials group, Department of Engineering Sciences, Uppsala University, where her research focuses on the tribology of metal cutting tools and rock drills and development of Ti-implant materials. Currently, she is supervising Lisa Toller-Nordström and Lee Fowler. During May 2018 – May 2019 she managed the Ångström Initiative on Additive Manufacturing. 

2009-2013 she had a position as material specialist at Sandvik Mining and Construction and 2013 she got the position as Global Sandvik Group Expert. In this role she is working with all Sandvik group companies. 

Susanne Norgren

adjunct professor at Department of Engineering Sciences, Applied Materials Science

Email:
Susanne.Norgren[AT-sign]angstrom.uu.se
Telephone:
+4618-471 7938
Mobile phone:
+46 70 5266323

Publications

  • Article in journal

    Fowler, Lee; Janson, Oscar; Engqvist, Håkan; Norgren, Susanne et al.

    Antibacterial investigation of titanium-copper alloys using luminescent Staphylococcus epidermidis in a direct contact test

    Part of Materials science & engineering. C, biomimetic materials, sensors and systems, p. 707-714, 2019.

  • Conference paper

    Heinrichs, Jannica; Norgren, Susanne; Jacobson, Staffan; Olsson, Mikael

    Cemented carbide wear initiation in sliding contact with iron ore

    Part of Proceedings of 2nd Sweden-China Symposium on Tribology, 2019.

  • Article in journal

    Toller-Nordström, Lisa; Mingard, K.; Norgren, Susanne

    Deformation induced martensite in a Fe-Ni-Co binder phase of a hardmetal

    Part of Materials Characterization, 2019.

  • Article in journal

    Haglöf, F.; Kaplan, B.; Norgren, Susanne; Blomqvist, A. et al.

    Experimental study of carbides in the Ti-Cr-C system

    Part of Journal of Materials Science, p. 12358-12370, 2019.

    Open access
  • Article in journal

    Heinrichs, Jannica; Norgren, Susanne; Jacobson, Staffan; Olsson, Mikael

    Influence of cemented carbide binder type on wear initiation in rock drilling – investigated in sliding wear against magnetite rock

    Part of International journal of refractory metals & hard materials, 2019.

  • Article in journal

    Heinrichs, Jannica; Norgren, Susanne; Jacobson, Staffan; Yvell, Karin et al.

    Influence of cemented carbide binder type on wear initiation in rock drilling – investigated in sliding wear against magnetite rock

    Part of International journal of refractory metals & hard materials, 2019.

  • Article in journal

    Yildiz, Ahmet Bahadir; Weidow, Jonathan; Ryukhtin, Vasyl; Norgren, Susanne et al.

    Very-small angle neutron scattering study on grain coarsening inhibition by V-doping of WC-Co composites

    Part of Scripta Materialia, p. 106-109, 2019.

    Open access
  • Article in journal

    Meingast, Arno; Coronel, Ernesto; Blomqvist, Andreas; Norgren, Susanne et al.

    High resolution STEM investigation of interface layers in cemented carbides

    Part of INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, p. 135 135-140 140, 2018.

  • Article in journal

    Kaplan, B.; Odelros, S.; Kritikos, M.; Bejjani, R. et al.

    Study of tool wear and chemical interaction during machining of Ti6Al4V

    Part of INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, p. 253 253-256 256, 2018.

  • Article in journal

    Jones, H. G.; Norgren, Susanne; Kritikos, M.; Mingard, K. P. et al.

    Examination of wear damage to rock-mining hardmetal drill bits

    Part of International journal of refractory metals & hard materials, p. 1-10, 2017.

  • Article in journal

    Odelros, S.; Kaplan, B.; Kritikos, M.; Johansson, Malin et al.

    Experimental and theoretical study of the microscopic crater wear mechanism in titanium machining

    Part of Wear, p. 115-124, 2017.

  • Article in journal

    Toller, Lisa; Liu, Chunxin; Holmström, Erik; Larsson, Tommy et al.

    Investigation of Cemented Carbides with Alternative Binders after CVD Coating

    Part of International journal of refractory metals & hard materials, p. 225-229, 2017.

  • Conference paper

    Toller, Lisa; Jacobson, Staffan; Norgren, Susanne

    Life time of cemented carbide inserts with Ni-Fe binder in steel turning

    2017.

  • Article in journal

    Toller, Lisa; Jacobson, Staffan; Norgren, Susanne

    Life time of cemented carbide inserts with Ni-Fe binder in steel turning

    Part of Wear, p. 1822-1829, 2017.

  • Conference paper

    Toller, Lisa; Norgren, Susanne

    Mechanisms of plastic deformation in WC-Co and WC-Ni-Fe turning inserts

    2017.

  • Conference paper

    Toller, Lisa; Norgren, Susanne

    Phase transformations in iron-based alternative binders for hardmetals

    2016.

  • Conference paper

    Toller, Lisa; Jacobson, Staffan; Norgren, Susanne

    Steel turning with nickel-iron bound hard metal tools – a study on microstructure in plastically deformed inserts

    2016.

  • Article in journal

    Stenlund, Patrik; Omar, Omar; Brohede, Ulrika; Norgren, Susanne et al.

    Bone response to a novel Ti–Ta–Nb–Zr alloy

    Part of Acta Biomaterialia, p. 165-175, 2015.

  • Article in journal

    Stenlund, Patrik; Omar, Omar; Brohede, Ulrika; Norgren, Susanne et al.

    Bone response to a novel Ti-Ta-Nb-Zr alloy

    Part of Acta Biomaterialia, p. 165-175, 2015.

  • Article in journal

    Weidow, Jonathan; Blomqvist, Andreas; Salomonsson, Johanna; Norgren, Susanne

    Cemented carbides based on WC pre-alloyed with Cr or Ta

    Part of INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, p. 36-41, 2015.

  • Conference paper

    Toller, Lisa; Larsson, Tommy; Jacobson, Staffan; Norgren, Susanne

    CVD Coating Adhesion on Metal Cutting Insertswith Alternative Binders

    2015.

  • Conference paper

    Toller, Lisa; Liu, Chunxin; Holmström, Erik; Larsson, Tommy et al.

    Investigation of Cemented Carbides with Alternative Binders after CVD Coating

    2015.

  • Article in journal

    Kaplan, Bartek; Blomqvist, Andreas; Selleby, Malin; Norgren, Susanne

    Thermodynamic analysis of the W-Co-Cr system supported by ab initio calculations and verified with quaternary data

    Part of Calphad, p. 59-67, 2015.

  • Article in journal

    Kaplan, Bartek; Norgren, Susanne; Schwind, Martin; Selleby, Malin

    Thermodynamic calculations and experimental verification in the WC-Co-Cr cemented carbide system

    Part of INT J REFRACT MET H, p. 257-262, 2015.

  • Article in journal

    Kaplan, Bartek; Norgren, Susanne; Schwind, Martin; Selleby, Malin

    Thermodynamic calculations and experimental verification in the WC-Co-Cr cemented carbide system (Reprint of Int. Journal of Refractory Metals and Hard Materials vol 48, pg 257-262, 2015)

    Part of INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, p. 400-405, 2015.

  • Article in journal

    Kaplan, Bartek; Markstrom, Andreas; Norgren, Susanne; Selleby, Malin

    Experimental Determination of the Solubility of Co in the Cr-Based Carbides Cr23C6, Cr7C3, and Cr3C2

    Part of Metallurgical and Materials Transactions. A, p. 4820-4828, 2014.

  • Article in journal

    Borgh, Ida; Hedstrom, Peter; Persson, Tomas; Norgren, Susanne et al.

    Microstructure, grain size distribution and grain shape in WC-Co alloys sintered at different carbon activities

    Part of International Journal of Refractory Metals and Hard Materials, p. 205-211, 2014.

  • Article in journal

    Kaplan, Bartek; Markstrom, Andreas; Blomqvist, Andreas; Norgren, Susanne et al.

    Thermodynamic analysis of the Co-Cr-C system

    Part of Calphad, p. 226-236, 2014.

  • Article in journal

    Arhammar, C.; Silvearv, F.; Bergman, Anders; Norgren, Susanne et al.

    A theoretical study of possible point defects incorporated into alpha-alumina deposited by chemical vapor deposition

    Part of Theoretical Chemistry accounts, p. 1433-, 2013.

  • Article in journal

    Angserud, Jenny; From, Anna; Wallin, Johan; Jacobson, Staffan et al.

    On a wear test for rock drill inserts

    Part of Wear, p. 109-115, 2013.

  • Conference paper

    Angserud, Jenny; From, Anna; Wallin, Johan; Jacobson, Staffan et al.

    On a wear test for rock drill inserts

    2013.

  • Article in journal

    Norgren, Susanne; Kusoffsky, Alexandra

    On the solubility of chromium in the cubic carbide and M7C3 carbide in the WC-Co-Cr-Me systems (Me = Ti, Nb, Ta and Zr)

    Part of INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, p. 24-26, 2013.

  • Manuscript (preprint)

    Toller-Nordström, Lisa; Gee, Mark; Holmberg, Anders; Mingard, Ken et al.

    Abrasive wear of hardmetals with a binder phase forming deformation induced martensite

  • Manuscript (preprint)

    Toller-Nordström, Lisa; Norgren, Susanne

    Orientation of binder phase lamellae formed through grain boundary sliding in hardmetal turning inserts

  • Article in journal

    Toller-Nordström, Lisa; Östby, Jonas; Norgren, Susanne

    Towards understanding plastic deformation in hardmetal turning inserts with different binders

    Part of International journal of refractory metals & hard materials