Publications

  • Article in journal

    Fowler, Lee; Janson, Oscar; Engqvist, Håkan; Norgren, Susanne et al.

    Antibacterial investigation of titanium-copper alloys using luminescent Staphylococcus epidermidis in a direct contact test

    Part of Materials science & engineering. C, biomimetic materials, sensors and systems, p. 707-714, 2019.

  • Conference paper

    Heinrichs, Jannica; Norgren, Susanne; Jacobson, Staffan; Olsson, Mikael

    Cemented carbide wear initiation in sliding contact with iron ore

    Part of Proceedings of 2nd Sweden-China Symposium on Tribology, 2019.

  • Article in journal

    Toller-Nordström, Lisa; Mingard, K.; Norgren, Susanne

    Deformation induced martensite in a Fe-Ni-Co binder phase of a hardmetal

    Part of Materials Characterization, 2019.

  • Doctoral thesis, comprehensive summary

    Heldin, Magnus

    Designing grinding tools to control and understand fibre release in groundwood pulping

    Open access
  • Article in journal

    Haglöf, F.; Kaplan, B.; Norgren, Susanne; Blomqvist, A. et al.

    Experimental study of carbides in the Ti-Cr-C system

    Part of Journal of Materials Science, p. 12358-12370, 2019.

    Open access
  • Conference paper

    Heinrichs, Jannica; Norgren, Susanne; Jacobson, Staffan; Olsson, Mikael

    Influence of cemented carbide binder type on wear initiation in rock drilling – investigated in sliding wear against magnetite rock

    Part of Proceedings of International Conference on the Science of Hard Materials, Khao Lak, Thailand, 2019.

  • Article in journal

    Heinrichs, Jannica; Norgren, Susanne; Jacobson, Staffan; Yvell, Karin et al.

    Influence of cemented carbide binder type on wear initiation in rock drilling – investigated in sliding wear against magnetite rock

    Part of International journal of refractory metals & hard materials, 2019.

  • Article in journal

    Olander, Petra; Heinrichs, Jannica

    Initiation and propagation of tool wear in turning of titanium alloys - Evaluated in successive sliding wear test

    Part of Wear, p. 1658-1666, 2019.

  • Conference paper

    Olander, Petra; Heinrichs, Jannica

    Initiation and propagation of tool wear in turning of titanium alloys – evaluated in successive sliding wear test

    Part of Proceedings of Wear of Materials Conference, Miami, Florida, USA, 2019.

  • Conference paper

    Hiroko, Mikado; Heinrichs, Jannica; Wiklund, Urban; Kawamura, Shingo et al.

    Initiation wear of cemented carbide tools used in copper processing - evaluated in sliding contact

    Part of Proceedings of International Conference on the Science of Hard Materials, Khao Lak, Thailand, 2019.

  • Conference paper

    Heldin, Magnus; Carlsson, Jenny; Isaksson, Per; Wiklund, Urban

    On tool engagement in groundwood pulping - in-situ observations and numerical modelling at the microscale

    Part of The 11th Fundamental Mechanical Pulp Research Seminar, Norrköping, Sweden, April 2-4, 2019.

  • Article in journal

    Hassila, Carl Johan; Harlin, P.; Wiklund, Urban

    Rolling contact fatigue crack propagation relative to anisotropies in additive manufactured Inconel 625

    Part of Wear, p. 1837-1845, 2019.

    Open access
  • Article in journal

    Holmberg, Anders; Andersson, Michael; Kassman Rudolphi, Åsa

    Rolling fatigue life of PM steel with different porosity and surface finish

    Part of Wear, p. 454-461, 2019.

    Open access
  • Conference paper

    Wiklund, Urban; Emy, Guttenkunst; Grandin, Martina; Toller, Lisa

    Wear mechanisms of tools for exploration drilling

    Part of Euromat 2019, Stockholm, Sweden, p. 787-, 2019.

  • Article in journal

    Heinrichs, Jannica; Mikado, H.; Kawakami, A.; Wiklund, Urban et al.

    Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire in zipper production

    Part of Wear, p. 96-107, 2019.

  • Article in journal

    Larsson, Elin; Olander, Petra; Jacobson, Staffan

    Boric acid as fuel additive - Friction experiments and reflections around its effect on fuel saving

    Part of Tribology International, p. 302-312, 2018.

  • Article in journal

    Tavares da Costa, Marcus Vinicius; Neagu, Cristian; Fayet, Pierre; Wiklund, Urban et al.

    Comparison of test methods estimating the stiffness of ultrathin coatings

    Part of Journal of Coatings Technology and Research, p. 743 743-752 752, 2018.

    Open access
  • Article in journal

    Ajaxon, Ingrid; Holmberg, Anders; Öhman, Caroline; Persson, Cecilia

    Fatigue performance of a high-strength, degradable calcium phosphate bone cement

    Part of Journal of The Mechanical Behavior of Biomedical Materials, p. 46-52, 2018.

    Open access
  • Article in journal

    Roizard, X.; Heinrichs, Jannica; Buteri, A.; Jacobson, Staffan et al.

    Friction behavior of ferritic stainless steel in a strongly diluted alcohol solution of alkylphosphonic acid

    Part of Tribology International, p. 465-473, 2018.

  • Article in journal

    Meingast, Arno; Coronel, Ernesto; Blomqvist, Andreas; Norgren, Susanne et al.

    High resolution STEM investigation of interface layers in cemented carbides

    Part of INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, p. 135 135-140 140, 2018.

  • Article in journal

    Grandin, Martina; Wiklund, Urban

    Influence of mechanical and electrical load on a copper/copper-graphite sliding electrical contact

    Part of Tribology International, p. 1-9, 2018.

  • Conference paper

    Heldin, Magnus; Wiklund, Urban

    Influences of grinding surface alignment in groundwood pulping of Norway spruce

    Part of 18th Nordic Symposium on Tribology - NORDTRIB 2018, Uppsala, Sweden, June 18-21, 2018.

  • Article in journal

    Heinrichs, Jannica; Olsson, Mikael; Almqvist, Bjarne; Jacobson, Staffan

    Initial surface failure and wear of cemented carbides in sliding contact with different rock types

    Part of Wear, p. 43-55, 2018.

  • Article in journal

    Heinrichs, Jannica; Olsson, Mikael; Yvell, Karin; Jacobson, Staffan

    On the deformation mechanisms of cemented carbide in rock drilling: Fundamental studies involving sliding contact against a rock crystal tip

    Part of International journal of refractory metals & hard materials, p. 141-151, 2018.

  • Conference paper

    Elo, Robin; Jacobson, Staffan

    On the dramatic wear protecting effect of tribofilms on wear of combustion engine valves

    2018.

  • Article in journal

    Westlund, Viktoria; Heinrichs, Jannica; Jacobson, Staffan

    On the Role of Material Transfer in Friction Between Metals: Initial Phenomena and Effects of Roughness and Boundary Lubrication in Sliding Between Aluminium and Tool Steels

    Part of Tribology letters, 2018.

    Open access
  • Conference paper

    Sjögren, Lena; Hammam, Tag; Kassman Rudolphi, Åsa

    Pitfalls in environmental endurance testing of electrical connectors – problem overview and discussion

    2018.

  • Conference paper

    Sjögren, Lena; Hammam, Tag; Kassman Rudolphi, Åsa

    Pitfalls in Environmental Endurance Testing of Electrical Connectors-Problem Overview and Discussion

    Part of Proceedings of 2018 29th International Conference on Electrical Contacts and 64th IEEE Holm Conference on Electrical Contacts, p. 475-482, 2018.

  • Doctoral thesis, comprehensive summary

    Elo, Robin

    Protective Tribofilms on Combustion Engine Valves

    Open access
  • Article in journal

    Kaplan, B.; Odelros, S.; Kritikos, M.; Bejjani, R. et al.

    Study of tool wear and chemical interaction during machining of Ti6Al4V

    Part of INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, p. 253 253-256 256, 2018.

  • Article in journal

    Elo, Robin; Heinrichs, Jannica; Jacobson, Staffan

    Surface texturing to promote formation of protective tribofilms on combustion engine valves

    Part of Proceedings of the Institution of mechanical engineers. Part J, journal of engineering tribology, p. 54-61, 2018.

  • Conference paper

    Larsson, Elin; Olander, Petra; Jacobson, Staffan

    Tribofilm formation of a boric acid fuel additive – Investigation of tribofilm properties

    2018.

  • Conference paper

    Heinrichs, Jannica; Kawakami, Ayumi; Mikado, Hiroko; Wiklund, Urban et al.

    Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire

    2018.

  • Article in journal

    Grandin, Martina; Wiklund, Urban

    Wear phenomena and tribofilm formation of copper/copper-graphite sliding electrical contact materials

    Part of Wear, p. 227-235, 2018.

  • Licentiate thesis, comprehensive summary

    Toller, Lisa

    Alternative binder hardmetals for steel turning

    Open access
  • Article in journal

    Sun, Fengzhen; Wiklund, Urban; Aviles, F.; Gamstedt, E. Kristofer

    Assessing local yield stress and fracture toughness of carbon nanotube poly(methyl methacrylate) composite by nanosectioning

    Part of Composites Science And Technology, p. 95-102, 2017.

  • Article in journal

    Goel, S.; Bjorklund, S.; Curry, N.; Wiklund, Urban et al.

    Axial suspension plasma spraying of Al2O3 coatings for superior tribological properties

    Part of Surface & Coatings Technology, p. 80-87, 2017.

  • Article in journal

    Larsson, Elin; Olander, Petra; Jacobson, Staffan

    Boric acid as a lubricating fuel additive - Simplified lab experiments to understand fuel consumption reduction in field test

    Part of Wear, p. 822-830, 2017.

  • Conference paper

    Larsson, Elin; Olander, Petra; Jacobson, Staffan

    Boric acid as a lubricating fuel additive - Simplified lab experiments to understand fuel consumption reduction in field test

    2017.

  • Conference paper

    Larsson, Elin; Olander, Petra; Jacobson, Staffan

    Boric acid as a lubricating fuel additive: Optimization of a lab test to understand fuel consumption reduction in field tests

    p. 1-1 2017.

    Open access
  • Conference paper

    Tavares da Costa, Marcus Vinicius; Bolinsson, Jessica; Neagu, Cristian; Fayet, Pierre et al.

    Comparison of experimental methods to characterize Young’s modulus of ultrathin coatings on polymer films

    2017.

  • Article in journal

    Aiso, Toshiharu; Wiklund, Urban; Kubota, Manabu; Jacobson, Staffan

    Effect of combined additions of Si, Mn, Cr and Al to carbon steel on material transfer in a steel/TiN coated tool sliding contact

    Part of Wear, p. 9-17, 2017.

  • Article in journal

    Jones, H. G.; Norgren, Susanne; Kritikos, M.; Mingard, K. P. et al.

    Examination of wear damage to rock-mining hardmetal drill bits

    Part of International journal of refractory metals & hard materials, p. 1-10, 2017.

  • Article in journal

    Odelros, S.; Kaplan, B.; Kritikos, M.; Johansson, Malin et al.

    Experimental and theoretical study of the microscopic crater wear mechanism in titanium machining

    Part of Wear, p. 115-124, 2017.

  • Conference paper

    Kryniski, Krystof; Kassman Rudolphi, Åsa; Zhao, Su; Lindholm, Per

    Experimental evaluation of contact stiffness and damping to sustain transients and resonances

    2017.

  • Conference paper

    Lind, Jonna; Kassman Rudolphi, Åsa

    Fretting behavior of PP grease lubricated PPS and PA composites

    2017.

  • Conference paper

    Lindholm, Per; Kryniski, Krystof; Zhao, Su; Kassman Rudolphi, Åsa

    Friction dissipation under tangential high freequency excitation

    2017.

  • Article in journal

    Larsson, Elin; Andersson, Anna M.; Kassman Rudolphi, Åsa

    Grease lubricated fretting of silver coated copper electrical contacts

    Part of Wear, p. 634-642, 2017.

  • Conference paper

    Larsson, Elin; Andersson, Anna M; Kassman Rudolpi, Åsa

    Grease lubricated fretting of silver coated copper electrical contacts

    2017.

  • Article in journal

    Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

    Initial deformation and wear of cemented carbides in rock drilling as examined by a sliding wear test

    Part of INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, p. 7-13, 2017.

  • Article in journal

    Toller, Lisa; Liu, Chunxin; Holmström, Erik; Larsson, Tommy et al.

    Investigation of Cemented Carbides with Alternative Binders after CVD Coating

    Part of International journal of refractory metals & hard materials, p. 225-229, 2017.

  • Article in journal

    Toller, Lisa; Jacobson, Staffan; Norgren, Susanne

    Life time of cemented carbide inserts with Ni-Fe binder in steel turning

    Part of Wear, p. 1822-1829, 2017.

  • Conference paper

    Toller, Lisa; Jacobson, Staffan; Norgren, Susanne

    Life time of cemented carbide inserts with Ni-Fe binder in steel turning

    2017.

  • Conference paper

    Toller, Lisa; Norgren, Susanne

    Mechanisms of plastic deformation in WC-Co and WC-Ni-Fe turning inserts

    2017.

  • Article in journal

    Olsson, Mikael; Yvell, K.; Heinrichs, Jannica; Bengtsson, M. et al.

    Surface degradation mechanisms of cemented carbide drill buttons in iron ore rock drilling

    Part of Wear, p. 81-92, 2017.

  • Conference paper

    Heldin, Magnus; Wiklund, Urban

    Tailored grinding surfaces for groundwood pulping - influencing wear mechanisms and energy requirements

    Part of 21st International Conference on Wear of Materials, Long Beach, March 26-30, 2017.

  • Licentiate thesis, comprehensive summary

    Lind, Jonna

    Tribology of polymer composites for elevated temperature applications

    Open access
  • Article in journal

    Elo, Robin; Heinrichs, Jannica; Jacobson, Staffan

    Wear protective capacity of tribofilms formed on combustion engine valves with different surface textures

    Part of Wear, p. 1429-1436, 2017.

  • Conference paper

    Kassman Rudolphi, Åsa; Edling, Erika; Zhao, Su; Öberg, Åke

    A test method for mapping the contact force limit of polymer materials in sliding contact

    2016.

  • Conference paper

    Larsson, Elin; Olander, Petra; Jacobson, Staffan

    Boric acid as a lubricating fuel additive: Adaption of a labtest technique to mimic piston/cylinder conditions

    2016.

    Open access
  • Conference paper

    Larsson, Elin; Olander, Petra; Jacobson, Staffan

    Boric acid as a lubricating fuel additive: Lab experiments to understand fuel savings in field test

    2016.

    Open access
  • Article in journal

    Mao, Fang; Taher, Mamoun; Kryshtal, Oleksandr; Kruk, Adam et al.

    Combinatorial Study of Gradient Ag-Al Thin Films: Microstructure, Phase Formation, Mechanical and Electrical Properties

    Part of ACS Applied Materials and Interfaces, p. 30635-30643, 2016.

    Open access
  • Conference paper

    Lind, Jonna; Kassman Rudolphi, Åsa

    Cross section microscopy studies of wear tested polymer composites

    2016.

  • Conference paper

    Lind, Jonna; Kassman Rudolphi, Åsa

    Cross sections studies of polymer composites

    2016.

  • Article in journal

    Podgornik, B.; Paulin, I.; Zajec, B.; Jacobson, Staffan et al.

    Deep cryogenic treatment of tool steels

    Part of Journal of Materials Processing Technology, p. 398-406, 2016.

  • Article in journal

    Gustavsson, Fredrik; Jacobson, Staffan

    Diverse mechanisms of friction induced self-organisation into a low-friction material - An overview of WS2 tribofilm formation

    Part of Tribology International, p. 340-347, 2016.

  • Article in journal

    Aiso, Toshiharu; Wiklund, Urban; Kubota, Manabu; Jacobson, Staffan

    Effect of Si and Al additions to carbon steel on material transfer and coating damage mechanism in turning with CVD coated tools

    Part of Wear, p. 379-389, 2016.

  • Article in journal

    Aiso, Toshiharu; Wiklund, Urban; Kubota, Manabu; Jacobson, Staffan

    Effect of Si and Cr additions to carbon steel on material transfer in a steel/TiN coated tool sliding contact

    Part of Tribology International, p. 337-348, 2016.

  • Conference paper

    Edling, Erika; Kassman Rudolphi, Åsa; Andersson, Anna; Zhao, Su et al.

    Evaluation of dry friction solutions for industrial applications

    2016.

  • Conference paper

    Tavares da Costa, Marcus Vinicius; Neagu, Cristian; Fayet, Pierre; Wiklund, Urban et al.

    Fragmentation and Adhesion of Thin Metal Oxide Coatings on Polymer Films

    2016.

    Open access
  • Article in journal

    Aiso, Toshiharu; Wiklund, Urban

    Influence of contact parameters on material transfer from steel to TiN coated tool – optimisation of a sliding test for simulation of material transfer in milling

    Part of Tribology - Materials, Surfaces & Interfaces, p. 107-116, 2016.

  • Article in journal

    Aiso, Toshiharu; Wiklund, Urban; Kubota, Manabu; Jacobson, Staffan

    Influence of Mn and Al additions to carbon steel on material transfer and coating damage mechanism in a sliding contact between steel and TiN coated HSS tool

    Part of Tribology International, p. 414-424, 2016.

  • Conference paper

    Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

    Initial wear of cemented carbides in sliding contact with different rock types

    2016.

  • Article in journal

    Heldin, Magnus; Isaksson, Per; Wiklund, Urban

    Initiation of wood defibration in groundwood pulping, single asperity indentation and scratching

    Part of Nordic Pulp & Paper Research Journal, p. 401-406, 2016.

    Open access
  • Article in journal

    Roizard, X.; Heinrichs, Jannica; Taouil, A. Et; Jacobson, Staffan et al.

    Insights into sliding wear and friction behavior of copper in ethanol containing alkylphosphonic acid molecules

    Part of Tribology International, p. 141-148, 2016.

  • Article in journal

    Westlund, Viktoria; Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

    Investigation of material transfer in sliding friction-topography or surface chemistry?

    Part of Tribology International, p. 213-223, 2016.

    Open access
  • Conference paper

    Heldin, Magnus; Wiklund, Urban

    Micrometre compressions to facilitate controlled wear in groundwood pulping

    Part of 17th Nordic Symposium on Tribology - Nordtrib, Hämeenlinna, Finland, 14-17 June, 2016.

  • Conference paper

    Westlund, Viktoria; Jacobson, Staffan

    Nitro carburized steels for high stress tribological components – influence on seizure limits from steel grade and surface treatment parameters

    2016.

  • Conference paper

    Öberg, Åke; Johansson, Erik; Arnell, Sylva; Kassman Rudolphi, Åsa

    On the self-healing of silver contacts

    Part of Proceedings - 28th International Conference on Electric Contacts, p. 265-270, 2016.

    Open access
  • Conference paper

    Toller, Lisa; Norgren, Susanne

    Phase transformations in iron-based alternative binders for hardmetals

    2016.

  • Article in journal

    Nyberg, Harald; Hogmark, Sture; Jacobson, Staffan

    Reply to a Comment on "Calculated Trajectories of Curling Stones under Assymetrical Friction: Validation of Published Models"

    Part of Tribology letters, 2016.

  • Conference paper

    Toller, Lisa; Jacobson, Staffan; Norgren, Susanne

    Steel turning with nickel-iron bound hard metal tools – a study on microstructure in plastically deformed inserts

    2016.

  • Conference paper

    Elo, Robin; Heinrichs, Jannica; Jacobson, Staffan

    Surface texturing to promote formation of protective tribofilms on combustion engine valves

    2016.

  • Conference paper

    Ajaxon, Ingrid; Holmberg, Anders; Öhman Mägi, Caroline; Persson, Cecilia

    The influence of porosity on the fatigue properties of brushite cement

    Part of Biomaterials for tissue engineering models, 2016.

  • Article in journal

    Grandin, Martina; Wiklund, Urban

    Wear and electrical performance of a slip-ring system with silver-graphite in continuous sliding against PVD coated wires

    Part of Wear, p. 138-147, 2016.

  • Article in journal

    Gustavsson, Fredrik; Bugnet, Matthieu; Polcar, Tomas; Cavaleiro, Albano et al.

    A High-Resolution TEM/EELS Study of the Effect of Doping Elements on the Sliding Mechanisms of Sputtered WS2 Coatings

    Part of Tribology Transactions, p. 113-118, 2015.

  • Conference paper

    Heldin, Magnus; Wiklund, Urban

    A labscale test equipment ot study the tool surface influence in pressure groundwood pulping

    Part of 20th International Conference on Wear of Materials, Toronto, Canada, April 12-16, 2015.

  • Article in journal

    Stenlund, Patrik; Omar, Omar; Brohede, Ulrika; Norgren, Susanne et al.

    Bone response to a novel Ti–Ta–Nb–Zr alloy

    Part of Acta Biomaterialia, p. 165-175, 2015.

  • Article in journal

    Stenlund, Patrik; Omar, Omar; Brohede, Ulrika; Norgren, Susanne et al.

    Bone response to a novel Ti-Ta-Nb-Zr alloy

    Part of Acta Biomaterialia, p. 165-175, 2015.

  • Article in journal

    Weidow, Jonathan; Blomqvist, Andreas; Salomonsson, Johanna; Norgren, Susanne

    Cemented carbides based on WC pre-alloyed with Cr or Ta

    Part of INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, p. 36-41, 2015.

  • Conference paper

    Yung, Der-Liang; Antonov, Maksim; Hussainova, Irina; Veinthal, Renno et al.

    Composition And Structure Of Bimodal WC-Co Materials Related To Mechanical Properties And Abrasive Wear

    Part of M2D2015, p. 655-664, 2015.

  • Conference paper

    Toller, Lisa; Larsson, Tommy; Jacobson, Staffan; Norgren, Susanne

    CVD Coating Adhesion on Metal Cutting Insertswith Alternative Binders

    2015.

  • Conference paper

    Heldin, Magnus; Wiklund, Urban

    Designed tools for controlling the defibration mechanisms in the pressure groundwood process

    Part of International Tribology Conference, Tokyo 2015, Tokyo, Japan, September 16-20, 2015.

  • Conference paper

    Lind, Jonna; Kassman Rudolphi, Åsa

    Effect of temperature on the performance of some polymer composites

    2015.

    Open access
  • Article in journal

    Elo, Robin; Jacobson, Staffan

    Formation and breakdown of oil residue tribofilms protecting the valves of diesel engines

    Part of Wear, p. 193-198, 2015.

  • Conference paper

    Lind, Jonna; Kassman Rudolphi, Åsa

    Friction and wear of PA66-PPA composites sliding against anodized aluminium cylinders

    2015.

  • Article in journal

    Lind, Jonna; Kassman Rudolphi, Åsa; Lindholm, Per O; Qin, Jian

    Friction and wear studies of some PEEK materials

    Part of Tribologia - Finnish Journal of Tribology, p. 20-28, 2015.

  • Conference paper

    Jacobson, Staffan

    Friction in curling –Fundamentals and applications of friction on ice illustrated by the Olympic winter sport: Keynote Talk

    2015.

  • Article in journal

    Mao, Fang; Wiklund, Urban; Andersson, Anna M.; Jansson, Ulf

    Graphene as a lubricant on Ag for electrical contact applications

    Part of Journal of Materials Science, p. 6518-6525, 2015.

    Open access
  • Article in journal

    Podgornik, Bojan; Sedlaček, M.; Čekada, M.; Jacobson, Staffan et al.

    Impact of fracture toughness on surface properties of PVD coated cold work tool steel

    Part of Surface & Coatings Technology, p. 144-150, 2015.

  • Conference paper

    Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

    Initial deformation and wear of cemented carbides for rock drilling as evaluated by a sliding wear test

    2015.

  • Article in journal

    Olsson, Mikael; Heinrichs, Jannica; Yvell, Karin; Jacobson, Staffan

    Initial degradation of cemented carbides for rock drilling - Model studies of the tribological contact against rock

    Part of International journal of refractory metals & hard materials, p. 104-113, 2015.

  • Conference paper

    Toller, Lisa; Liu, Chunxin; Holmström, Erik; Larsson, Tommy et al.

    Investigation of Cemented Carbides with Alternative Binders after CVD Coating

    2015.

  • Conference paper

    Westlund, Viktoria; Heinrichs, Jannica; Jacobson, Staffan

    INVESTIGATION OF MATERIAL TRANSFER IN SLIDING FRICTION-TOPOGRAPHY OR SURFACE CHEMISTRY?

    2015.

  • Conference paper

    Jacobson, Staffan

    Material transfer – an underrated phenomenon in friction

    2015.

  • Conference paper

    Olander, Petra; Johnsson, Elin; Jacobson, Staffan

    Mechanisms behind the promising tribological performance of a boric acid based lubricant additive

    Part of Proceedings of the 42th Leeds-Lyon Symposium on Tribology, 2015.

  • Conference paper

    Olander, Petra; Jacobson, Staffan

    Scuffing resistance testing of piston ring materials for marine two-stroke diesel engines and mapping of the operating mechanisms

    2015.

  • Article in journal

    Olander, Petra; Jacobson, Staffan

    Scuffing resistance testing of piston ring materials for marine two-stroke diesel engines and mapping of the operating mechanisms

    Part of Wear, p. 42-48, 2015.

    Open access
  • Conference paper

    Heinrichs, Jannica; Olsson, Mikael; Yvell, Karin; Jacobson, Staffan

    Soft rock scratches hard cemented carbide

    2015.

  • Article in journal

    Heinrichs, Jannica; Olsson, Mikael; Staffan, Jacobson

    Surface degradation of cemented carbides in scratching contact with granite and diamond: the roles of microstructure and composition

    Part of Wear, p. 210-221, 2015.

  • Article in journal

    Olander, Petra; Eskildsen, Svend S.; Fogh, Jesper W.; Hollman, Patrik et al.

    Testing scuffing resistance of materials for marine 2-stroke engines: Difficulties with lab scale testing of a complex phenomenon

    Part of Wear, p. 9-18, 2015.

    Open access
  • Article in journal

    Anmark, Niclas; Bjork, Thomas; Ganea, Anna; Olund, Patrik et al.

    The effect of inclusion composition on tool wear in hard part turning using PCBN cutting tools

    Part of Wear, p. 13-22, 2015.

    Open access
  • Article in journal

    Kaplan, Bartek; Blomqvist, Andreas; Selleby, Malin; Norgren, Susanne

    Thermodynamic analysis of the W-Co-Cr system supported by ab initio calculations and verified with quaternary data

    Part of Calphad, p. 59-67, 2015.

  • Article in journal

    Kaplan, Bartek; Norgren, Susanne; Schwind, Martin; Selleby, Malin

    Thermodynamic calculations and experimental verification in the WC-Co-Cr cemented carbide system

    Part of INT J REFRACT MET H, p. 257-262, 2015.

  • Article in journal

    Kaplan, Bartek; Norgren, Susanne; Schwind, Martin; Selleby, Malin

    Thermodynamic calculations and experimental verification in the WC-Co-Cr cemented carbide system (Reprint of Int. Journal of Refractory Metals and Hard Materials vol 48, pg 257-262, 2015)

    Part of INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, p. 400-405, 2015.

  • Article in journal

    Grandin, Martina; Nedfors, Nils; Sundberg, Jill; Jansson, Ulf et al.

    Ti-Ni-C nanocomposite coatings evaluated in a sliding electrical contact application

    Part of Surface & Coatings Technology, p. 210-218, 2015.

  • Conference paper

    Nyberg, Harald; Grandin, Martina; Wiklund, Urban; Jacobson, Staffan

    A method for tribological evaluation of gradient surfaces

    2014.

  • Conference paper

    Grandin, Martina; Wiklund, Urban

    A wear tolerant slip-ring assembly, individual spring-wire brushes in a v-grooved metal-graphite ring

    Part of Proceedings of the 27th International Conference on Electrical Contacts, p. 237-243, 2014.

  • Article in journal

    Gerth, Julia; Gustavsson, Fredrik; Collin, Marianne; Gunilla, Andersson et al.

    Adhesion phenomena in the secondary shear zone in turning of austenitic stainless steel and carbon steel

    Part of Journal of Materials Processing Technology, p. 1467-1481, 2014.

  • Article in journal

    Riddar, Frida; Kassman Rudolphi, Åsa

    Comparison of friction performance of four anodised aluminium surfaces for use in a clutch actuator

    Part of Wear, p. 227-233, 2014.

  • Conference paper

    Heinrichs, Jannica; Gustavsson, Fredrik; Olsson, Mikael; Jacobson, Staffan

    Deformation-activated work material transfer to DLC coatings

    2014.

  • Conference paper

    Holmgren Lind, Jonna; Kassman Rudolphi, Åsa

    Effect of PTFE on the tribological behaviour of PPS with glass fiber

    Part of 1st International conference on polymer tribology (PolyTrib), 2014.

  • Article in journal

    Kaplan, Bartek; Markstrom, Andreas; Norgren, Susanne; Selleby, Malin

    Experimental Determination of the Solubility of Co in the Cr-Based Carbides Cr23C6, Cr7C3, and Cr3C2

    Part of Metallurgical and Materials Transactions. A, p. 4820-4828, 2014.

  • Conference paper

    Elo, Robin; Jacobson, Staffan

    Formation and degradation of protective tribofilms on diesel engine valve surfaces

    2014.

  • Conference paper

    Holmgren, Jonna; Kassman Rudolphi, Åsa

    Friction and wear studies of some PEEK materials

    Part of 16th Nordic Symposium on Tribology (NORDTRIB), 2014.

  • Article in journal

    Nygren, Kristian; Samuelsson, Mattias; Flink, Axel; Ljungcrantz, Henrik et al.

    Growth and characterization of chromium carbide films deposited by high rate reactive magnetron sputtering for electrical contact applications

    Part of Surface & Coatings Technology, p. 326-334, 2014.

    Open access
  • Article in journal

    Sundberg, Jill; Nyberg, Harald; Särhammar, Erik; Nyberg, Tomas et al.

    Influence of composition, structure and testing atmosphere on the tribological performance of W-S-N coatings

    Part of Surface & Coatings Technology, p. 86-94, 2014.

    Open access
  • Conference paper

    Heinrichs, Jannica; Yvell, Karin; Olsson, Mikael; Jacobson, Staffan

    Influence of hardness and microstructure on the mechanisms of deformation and wear of cemented carbides for rock drilling

    2014.

  • Conference paper

    Heldin, Magnus; Wiklund, Urban; Isaksson, Per

    Initiation of wood defibration, tribology at the fiber level

    Part of Nordtrib, Aarhus, Denmark, June 10-13, 2014.

  • Conference paper

    Jacobson, Staffan

    Low-friction Sliding Without Lubrication– Five Working Material Concepts and Tribological Challenges

    2014.

  • Book

    Torbacke, Marika; Kassman Rudolphi, Åsa; Kassfeldt, Elisabet

    Lubricants: Introduction to properties and performance

    John Wiley & Sons, 2014.

  • Article in journal

    Särhammar, Erik; Strandberg, Erik; Sundberg, Jill; Nyberg, Harald et al.

    Mechanisms for compositional variations of coatings sputtered from a WS2 target

    Part of Surface & Coatings Technology, p. 186-190, 2014.

  • Article in journal

    Borgh, Ida; Hedstrom, Peter; Persson, Tomas; Norgren, Susanne et al.

    Microstructure, grain size distribution and grain shape in WC-Co alloys sintered at different carbon activities

    Part of International Journal of Refractory Metals and Hard Materials, p. 205-211, 2014.

  • Article in journal

    Heinrichs, Jannica; Jenei, Istvan Zoltan; Jacobson, Staffan

    Morphology and composition of tribofilms deposited using a tribochemical burnishing technique

    Part of Tribology - Materials, Surfaces & Interfaces, p. 14-20, 2014.

  • Conference paper

    Olsson, Mikael; Heinrichs, Jannica; Yvell, Karin; Jacobson, Staffan

    On the relevance of hardness as a material parameter in the deformation and wear of cemented carbides in rock drilling

    2014.

  • Conference paper

    Eskildsen, Svend; Fogh, Jesper; Andersson, Henrik; Olander, Petra et al.

    On the sulphuric acid corrosion in large 2-stroke marine diesel engines

    Part of Tribocorrosion 2014,  9-11 April 2014, University of Strathclyde, Glasgow, 2014.

  • Article in journal

    Forsberg, Peter; Debord, Dominique; Jacobson, Staffan

    Quantification of Combustion Valve Sealing Interface Sliding - A Novel Experimental Technique and Simulations

    Part of Tribology International, p. 150-155, 2014.

  • Conference paper

    Heldin, Magnus; Wiklund, Urban

    Scratch testing for mimicking the early stage of wood defibration

    Part of Asiatrib, Agra, India, February 17-20, 2014.

  • Conference paper

    Olander, Petra; Eskildsen S., Svend; Fogh W., Jesper; Hollman, P. et al.

    Testing scuffing resistance of materials for marine 2-stroke engines: Difficulties with lab scale testing of a complex phenomenon

    Part of Proceedings of 16th Nordic Symposium on Tribology, 2014.

  • Article in journal

    Riddar, Frida; Kassman Rudolphi, Åsa

    The effect of lubrication on the friction performance in pneumatic clutch actuators

    Part of Wear, p. 166-173, 2014.

  • Article in journal

    Forsberg, Peter; Elo, Robin; Jacobson, Staffan

    The importance of oil and particle flow for exhaust valve wear - An experimental study

    Part of Tribology International, p. 176-183, 2014.

  • Article in journal

    Kaplan, Bartek; Markstrom, Andreas; Blomqvist, Andreas; Norgren, Susanne et al.

    Thermodynamic analysis of the Co-Cr-C system

    Part of Calphad, p. 226-236, 2014.

  • Article in journal

    Heinrichs, Jannica; Olsson, Mikael; Jenei, Istvan Zoltan; Jacobson, Staffan

    Transfer of titanium in sliding contacts: New discoveries and insights revealed by in situ studies in the SEM

    Part of Wear, p. 87-94, 2014.

  • Article in journal

    Nyberg, Harald; Sundberg, Jill; Särhammar, Erik; Nyberg, Tomas et al.

    Tribochemical formation of sulphide tribofilms from a Ti-C-S coating sliding against different counter surfaces

    Part of Tribology letters, p. 563-572, 2014.

  • Article in journal

    Tkachenko, Serhii; Datskevich, Oleg; Kulak, Leonid; Jacobson, Staffan et al.

    Wear and friction properties of experimental Ti-Si-Zr alloys for biomedical applications

    Part of Journal of The Mechanical Behavior of Biomedical Materials, p. 61-72, 2014.

  • Conference paper

    Elo, Robin; Jacobson, Staffan

    Wear mechanism differences of intake valves within heavy duty combustion engines

    2014.

  • Conference paper

    Elo, Robin; Jacobson, Staffan

    Wear mechanism study of intake valve system in modern heavy duty combustion engines

    2014.

  • Conference paper

    Gustavsson, Fredrik; Bugnet, Matthieu; Polcar, Tomas; Cavaleiro, Albano et al.

    A High-Resolution TEM/EELS Study of the Effect of Doping Elements on the Sliding Mechanisms of Sputtered WS2 Coatings

    2013.

  • Article in journal

    Arhammar, C.; Silvearv, F.; Bergman, Anders; Norgren, Susanne et al.

    A theoretical study of possible point defects incorporated into alpha-alumina deposited by chemical vapor deposition

    Part of Theoretical Chemistry accounts, p. 1433-, 2013.

  • Conference paper

    Gustavsson, Fredrik; Jacobson, Staffan

    All roads lead to Rome: On the numerous routes to low-friction WS2 tribofilms

    2013.

  • Article in journal

    Nyberg, Harald; Hogmark, Sture; Jacobson, Staffan

    Calculated Trajectories of Curling Stones Sliding Under Asymmetrical Friction: Validation of Published Models

    Part of Tribology letters, p. 379-385, 2013.

  • Conference paper

    Forsberg, Peter; Gustavsson, Fredrik; Hollman, Patrik; Jacobson, Staffan

    Comparison and analysis of protective tribofilms found on heavy duty exhaust valves from field service and made in test rig

    2013.

  • Article in journal

    Forsberg, Peter; Gustavsson, Fredrik; Hollman, Patrik; Jacobson, Staffan

    Comparison and analysis of protective tribofilms found on heavy duty exhaust valves from field service and made in test rig

    Part of Wear, p. 1351-1359, 2013.

  • Article in journal

    Nyberg, Harald; Tokoroyama, Takayuki; Wiklund, Urban; Jacobson, Staffan

    Design of low-friction PVD coating systems with enhanced running-in performance - carbon overcoats on TaC/aC coatings

    Part of Surface & Coatings Technology, p. 48-54, 2013.

    Open access
  • Conference paper

    Nyberg, Harald; Sundberg, Jill; Särhammar, Erik; Gustavsson, Fredrik et al.

    Extreme friction reductions during inital running-in of W-S-C-Ti low-friction coatings

    Part of 19th International Conference on Wear of Materials 2013; 14-18 April 2013; Portland, OR, USA, 2013.

  • Article in journal

    Nyberg, Harald; Sundberg, Jill; Särhammar, Erik; Gustavsson, Fredrik et al.

    Extreme friction reductions during inital running-in of W-S-C-Ti low-friction coatings

    Part of Wear, p. 987-997, 2013.

  • Article in journal

    Riddar, Frida; Kassman Rudolphi, Åsa

    Friction, wear and surface damage mechanisms of pneumatic clutch actuators

    Part of Wear, p. 36-44, 2013.

  • Article in journal

    Grandin, Martina; Wiklund, Urban

    Friction, wear and tribofilm formation on electrical contact materials in reciprocating sliding against silver-graphite

    Part of Wear, p. 1481-1491, 2013.

  • Conference paper

    Grandin, Martina; Wiklund, Urban

    Friction, wear and tribofilm formation on electrical contact materials in reciprocating sliding against silver-graphite

    2013.

  • Article in journal

    Gustavsson, Fredrik; Jacobson, Staffan; Cavaleiro, Albano; Polcar, Tomas

    Frictional behavior of self-adaptive nanostructural Mo-Se-C coatings in different sliding conditions

    Part of Wear, p. 286-296, 2013.

  • Article in journal

    Heinrichs, Jannica; Gerth, Julia; Thersleff, Thomas; Bexell, Ulf et al.

    Influence of sliding speed on modes of material transfer as steel slides against PVD tool coatings

    Part of Tribology International, p. 55-64, 2013.

  • Article in journal

    Sundberg, Jill; Nyberg, Harald; Särhammar, Erik; Gustavsson, Fredrik et al.

    Influence of Ti addition on the structure and properties of low-friction W–S–C coatings

    Part of Surface & Coatings Technology, p. 340-348, 2013.

  • Conference paper

    Heinrichs, Jannica; Olsson, Mikael; Staffan, Jacobson

    Influence of tool steel microstructure on initial material transfer in metal forming – In situ studies in the SEM

    2013.

  • Article in journal

    Heinrichs, Jannica; Olsson, M.; Jacobson, Staffan

    Influence of tool steel microstructure on initial material transfer in metal forming-In situ studies in the SEM

    Part of Wear, p. 1249-1256, 2013.

  • Article in journal

    Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

    Initiation of Galling in Metal Forming: Differences Between Aluminium and Austenitic Stainless Steel Studied In Situ in the SEM

    Part of Tribology letters, p. 431-438, 2013.

  • Article in journal

    Pettersson, Maria; Tkachenko, S.; Schmidt, S.; Berlind, T. et al.

    Mechanical and tribological behavior of silicon nitride and silicon carbon nitride coatings for total joint replacements

    Part of Journal of The Mechanical Behavior of Biomedical Materials, p. 41-47, 2013.

  • Conference paper

    Heinrichs, Jannica; Jenei, Istvan Zoltan; Jacobson, Staffan

    Morphology and composition of tribofilms deposited using a tribochemical burnishing technique

    2013.

  • Article in journal

    Gustavsson, Fredrik; Svahn, Fredrik; Bexell, Ulf; Jacobson, Staffan

    Nanoparticle based and sputtered WS2 low-friction coatings - Differences and similarities with respect to friction mechanisms and tribofilm formation

    Part of Surface & Coatings Technology, p. 616-626, 2013.

  • Conference paper

    Jacobson, Staffan; Heinrichs, Jannica; Olsson, Mikael

    New experimental findings on the role of initial material transfer in determining friction and surface damage

    2013.

  • Article in journal

    Angserud, Jenny; From, Anna; Wallin, Johan; Jacobson, Staffan et al.

    On a wear test for rock drill inserts

    Part of Wear, p. 109-115, 2013.

  • Conference paper

    Angserud, Jenny; From, Anna; Wallin, Johan; Jacobson, Staffan et al.

    On a wear test for rock drill inserts

    2013.

  • Article in journal

    Norgren, Susanne; Kusoffsky, Alexandra

    On the solubility of chromium in the cubic carbide and M7C3 carbide in the WC-Co-Cr-Me systems (Me = Ti, Nb, Ta and Zr)

    Part of INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, p. 24-26, 2013.

  • Article in journal

    Forsberg, Peter; Gustavsson, Fredrik; Renman, Viktor; Hieke, André et al.

    Performance of DLC coatings in heated commercial engine oil

    Part of Wear, p. 211-222, 2013.

  • Conference paper

    Olander, Petra; Hollman, Patrik; Jacobson, Staffan

    Piston ring and cylinder liner wear aggravation caused by transition to greener ship transports: Comparison of samples from test rig and field

    2013.

  • Article in journal

    Olander, Petra; Hollman, Patrik; Jacobson, Staffan

    Piston ring and cylinder liner wear aggravation caused by transition to greener ship transports: Comparison of samples from test rig and field

    Part of Wear, p. 1345-1350, 2013.

  • Article in journal

    Sundberg, Jill; Mao, Fang; Andersson, Anna M.; Wiklund, Urban et al.

    Solution-based synthesis of AgI coatings for low-friction applications

    Part of Journal of Materials Science, p. 2236-2244, 2013.

  • Article in journal

    Pettersson, Maria; Berlind, Torun; Schmidt, Susann; Jacobson, Staffan et al.

    Structure and composition of silicon nitride and silicon carbon nitridecoatings for joint replacements

    Part of Surface & Coatings Technology, p. 827-834, 2013.

  • Article in journal

    Nyberg, Harald; Alfredsson, Sara; Hogmark, Sture; Jacobson, Staffan

    The asymmetrical friction mechanism that puts the curl in the curling stone

    Part of Wear, p. 583-589, 2013.

  • Conference paper

    Nyberg, Harald; Alfredsson, Sara; Hogmark, Sture; Jacobson, Staffan

    The asymmetrical friction mechanism that puts the curl in the curling stone

    2013.

  • Article in journal

    Nyberg, Harald; Alfredsson, Sara; Hogmark, Sture; Jacobson, Staffan

    The asymmetrical friction mechanism that puts the curl in the curling stone

    Part of Wear, p. 583-589, 2013.

  • Conference paper

    Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

    Transfer of titanium in sliding contacts - New discoveries and insights revealed by in situ studies in the SEM

    2013.

  • Conference paper

    Sundberg, Jill; Nyberg, Harald; Särhammar, Erik; Nyberg, Tomas et al.

    Tribochemically active Ti-C-S coatings

    2013.

  • Article in journal

    Sundberg, Jill; Nyberg, Harald; Särhammar, Erik; Kádas, Krisztina et al.

    Tribochemically Active Ti–C–S Nanocomposite Coatings

    Part of Materials Research Letters, p. 148-155, 2013.

    Open access
  • Conference paper

    Sundberg, Jill; Nyberg, Harald; Särhammar, Erik; Kádas, Krisztina et al.

    Tribochemically active Ti-C-S nanocomposites – a new concept for self-lubricating coatings

    2013.

  • Conference paper

    Jacobson, Staffan

    Tribology is just another word for extreme conditions: Invited Keynote

    2013.

  • Article in journal

    Gustavsson, Fredrik; Jacobson, Staffan; Cavaleiro, Albano; Polcar, Tomas

    Ultra-low friction of W-S-N solid lubricant coating

    Part of Surface & Coatings Technology, p. 541-548, 2013.

  • Conference paper

    Andersson, Gunnar; Öberg, Åke; Grandin, Martina; Kassman Rudolphi, Åsa

    Understanding field experience of contact performance from lab fretting tests of model contacts

    Part of Proc. IEEE 59th HOLM Conference on Electrical Contacts, p. 207-214, 2013.

  • Conference paper

    Pettersson, Maria; Thersleff, Thomas; Jacobson, Staffan; Larsson, Sune et al.

    Wear zones on retrieved metal femoral heads from metal-on-polymer hip prostheses

    2013.

  • Conference paper

    Gerth, Julia; Collin, Marianne; Andersson, Gunilla; Nordh, Lars-Göran et al.

    Adhesion phenomena in the secondary shear zone in turning of austenitic stainless steel and carbon steel

    2012.

  • Conference paper

    Gerth, Julia; Wiklund, Urban

    Adhesion properties in the secondary shear zone in turning of austenitic stainless steel and carbon steel

    2012.

  • Conference paper

    Zhmud, Boris; Åkerlund, Eva-Brita; Jacobson, Staffan; Hardell, Jens et al.

    ANS Triboconditioning: In-Manufacture Running-in Process for Improving Tribological Properties of Mechanical Parts made of Steel and Cast Iron

    Part of 18th International Colloquium Tribology – Industrial and Automotive Lubrication, Ostfildern, Germany, 2012.

  • Conference paper

    Nyberg, Harald; Hogmark, Sture; Jacobson, Staffan

    Calculated trajectories of curling stones sliding under asymmetrical friction

    Part of Nordtrib 2012, 15th Nordic Symposium on Tribology, 2012.

  • Chapter in book

    Jacobson, Staffan

    Coatings and surface treatments: interaction with lubricants

    Part of The Handbook of Lubrication and Tribology, p. 41-1-41-13, 2012.

  • Article in journal

    Riddar, Frida; Hogmark, Sture; Kassman Rudolphi, Åsa

    Comparison of anodised aluminium surfaces from four fabrication methods

    Part of Journal of Materials Processing Technology, p. 2272-2281, 2012.

  • Article in journal

    Polcar, Tomas; Gustavsson, Fredrik; Thersleff, Thomas; Jacobson, Staffan et al.

    Complex frictional analysis of self-lubricant W-S-C/Cr coating

    Part of Faraday discussions (Online), p. 383-401, 2012.

  • Conference paper

    Nyberg, Harald; Tokoroyama, Takayuki; Wiklund, Urban; Jacobson, Staffan

    Design of low-friction PVD coating systems with enhanced running-in performance - carbon overcoats on TaC/aC coatings

    Part of Nordtrib 2012, 15th Nordic Symposium on Tribology, 2012.

  • Article in journal

    Gerth, Julia; Heinrichs, Jannica; Nyberg, Harald; Larsson, Mats et al.

    Evaluation of an intermittent sliding test for reproducing work material transfer in milling operations

    Part of Tribology International, p. 153-160, 2012.

  • Article in journal

    Olofsson, Johanna; Grehk, T. Mikael; Berlind, Torun; Persson, Cecilia et al.

    Evaluation of silicon nitride as a wear resistant and resorbable alternative for total joint replacement

    Part of Biomatter, p. 94 94-102 102, 2012.

  • Article in journal

    Heinrichs, Jannica; Jacobson, Staffan

    Evaluation of TiB2 coatings in cold forming of aluminium

    Part of Surface Engineering, p. 517-525, 2012.

  • Article in journal

    Olofsson, Johanna; Pettersson, Maria; Teuscher, Nico; Heilmann, Andreas et al.

    Fabrication and evaluation of SixNy coatings for total joint replacements

    Part of Journal of materials science. Materials in medicine, p. 1879-1889, 2012.

  • Article in journal

    Gustavsson, Fredrik; Forsberg, Peter; Renman, Viktor; Jacobson, Staffan

    Formation of tribologically beneficial layer on counter surface with smart chemical design of DLC coating in fuel contact

    Part of Tribology - Materials, Surfaces & Interfaces, p. 102-108, 2012.

  • Article in journal

    Gustavsson, Fredrik; Forsberg, Peter; Jacobson, Staffan

    Friction and wear behaviour of low-friction coatings in conventional and alternative fuels

    Part of Tribology International, p. 22-28, 2012.

  • Conference paper

    Forsberg, Peter; Hollman, Patrik; Jacobson, Staffan

    Heavy duty exhaust valve simulation and evaluation in a test rig

    Part of Nordtrib, Trondheim, 2012, 2012.

  • Conference paper

    Gustavsson, Fredrik; Forsberg, Peter; Renman, Viktor; Hieke, André et al.

    How tribological propertiesof DLC coatings vary in different engine oils at elevated temperature

    Part of Nordtrib, Trondheim, Norge, 2012.

  • Article in journal

    Heinrichs, Jannica; Gerth, Julia; Bexell, Ulf; Larsson, Mats et al.

    Influence from surface roughness on steel transfer to PVD tool coatings in continuous and intermittent sliding contacts

    Part of Tribology International, p. 9-18, 2012.

  • Conference paper

    Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

    Initiation of galling in forming of ductile metals: – differences between aluminium and austenitic stainless steel studied in situ in the SEM

    Part of Nordtrib, Trondheim, Norway, 2012, 2012.

  • Conference paper

    Pettersson, Maria; Tkachenko, Sergey; Schmidt, Susann; Jacobson, Staffan et al.

    Mechanical properties of SixNy- and SixCyNz-coatings for total joint replacements

    Part of 15th Nordic Symposium on Tribology, NordTrib, Trondheim, Norway, June 12-15, 2012., 2012.

  • Article in journal

    Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

    Mechanisms of material transfer studied in situ in the SEM: Explanations to the success of DLC coated tools in aluminium forming

    Part of Wear, p. 49-60, 2012.

  • Article in journal

    Heinrichs, Jannica; Jacobson, Staffan

    Mechanisms of transfer of aluminium to PVD-coated forming tools

    Part of Tribology letters, p. 299-312, 2012.

  • Conference paper

    Särhammar, Erik; Sundberg, Jill; Nyberg, Harald; Kubart, Tomas et al.

    Mechanisms responsible for compositional variations of films sputtered from a WS2 target

    Part of International Conference on Metallurgical Coatings and Thin films (ICMCTF) 23-27/04 2012, San Diego, abstract number:428, 2012.

  • Conference paper

    Tkachenko, Sergey; Pettersson, Maria; Schmidt, Susann; Berlind, Torun et al.

    Micro scratch testing of silicon nitride and silicon carbon nitride coatings

    Part of Scandinavian Society for Biomaterials, the 5th Annual Meeting, Uppsala, Sweden, May 8-9, 2012., 2012.

  • Article in journal

    Andre, Benny; Hollman, Patrik; Wiklund, Urban

    Nanoindentation on micro pillars for determination of intrinsic hardness and residual stress in coatings deposited on complex geometries

    Part of Tribologia, p. 22 22-31 31, 2012.

  • Article in journal

    Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

    New understanding of the initiation of material transfer and transfer layer build-up in metal forming: In situ studies in the SEM

    Part of Wear, p. 61-73, 2012.

  • Conference paper

    Hogmark, Sture; Smid, Michal; Coronel, Ernesto; Wiklund, Urban

    On the residual stresses vs. hardness of tribological surfaces

    2012.

  • Doctoral thesis, comprehensive summary

    Heinrichs, Jannica

    On Transfer of Work Material to Tools

    Open access
  • Article in journal

    Broqvist, Natalia; Hogmark, Sture; Medvedeva, A.; Gunnarsson, S.

    On wear resistance of tool steel

    Part of Journal of Manufacturing Processes, p. 195-198, 2012.

  • Article in journal

    André, Benny; Gustavsson, Fredrik; Svahn, Fredrik; Jacobson, Staffan

    Performance and Tribofilm Formation of a Low-Friction Coating Incorporating Inorganic Fullerene Like Nano-Particles

    Part of Surface & Coatings Technology, p. 2325-2329, 2012.

  • Conference paper

    Forsberg, Peter; Hollman, Patrik; Jacobson, Staffan

    Protective tribofilm build up from exhaust residues on the surface on  exhaust valve systems in a test rig

    Part of Nordtrib, Trondheim, Norway, 2012, 2012.

  • Conference paper

    Gustavsson, Fredrik; Forsberg, Peter; Renman, Viktor; Hieke, André et al.

    Smart DLC coating top coating for reduction of counter surface wear in fuel contact

    Part of Faraday Discussion 156: Tribology, 2012.

  • Conference paper

    Sundberg, Jill; Nyberg, Harald; Särhammar, Erik; Nyberg, Tomas et al.

    Sulfur-doping of nc-TiC/a-C films by reactive sputtering

    Part of Thirteenth International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, Germany, 10-14 September 2012, 2012.

  • Conference paper

    Olander, Petra; Hollman, Patrik; Jacobson, Staffan

    Test rig investigations of cylinder liner and piston ring wear caused by transition to greener ship transports: An initial study

    Part of Nordtrib 2012, 15th Nordic Symposium on Tribology, Trondheim, June 12-15 2012, 2012.

    Open access
  • Conference paper

    Thersleff, Thomas; Gustavsson, Fredrik; Pohl, Darius; Rellinghaus, Bernd et al.

    The defect landscape and self-ordering mechanism of solid lubricant coatings exhibiting superlubricity

    Part of Proceedings of the 15th European Microscopy Congress, p. 493-494, 2012.

  • Article in journal

    Olofsson, Johanna; Jacobson, Staffan

    The influence of grain size and surface treatment of the tribofilm formation on alumina components

    Part of Wear, p. 17-24, 2012.

  • Article in journal

    Olofsson, Johanna; Bexell, Ulf; Jacobson, Staffan

    Tribofilm formation of lightly loaded self mated alumina contacts

    Part of Wear, p. 39-45, 2012.

  • Conference paper

    Kassman Rudolphi, Åsa; Wiklund, Urban

    Tribological requirements for selection of new materials for electrical connectors

    Part of NordTrib 2012, Trondheim, Norge, 2012.

  • Conference paper

    Gustavsson, Fredrik; Polcar, Tomas; Jacobson, Staffan; Cavaleiro, Albano

    Tribology of selenium-based solid lubricants alloyed with carbon

    Part of Advances in lubrication, Costa Rica, 2012.

  • Conference paper

    Forsberg, Peter; Hollman, Patrik; Jacobson, Staffan

    Wear study of coated heavy duty exhaust valve systems in a experimental test rig

    2012.

  • Article in journal

    Forsberg, Peter; Hollman, Patrik; Jacobson, Staffan

    Wear study of coated heavy duty exhaust valve systems in a experimental test rig

    Part of SAE International technical papers, 2012.

  • Conference paper

    Malmros, Martina; Olsson, Mikael; Bexell, Ulf; Wiklund, Urban

    Assessing the mechanical and electrical properties of aluminium oxide on aluminium using nanoindentation and nanoscratching

    2011.

  • Conference paper

    Pettersson, Maria; Olofsson, Johanna; Teuscher, Nico; Jacobson, Staffan et al.

    Ball-on-disc testing of SiNx coatings for hip joint implants

    2011.

  • Article in journal

    Jansson, Ulf; Lewin, Erik; Råsander, Mikael; Eriksson, Olle et al.

    Design of carbide-based nanocomposite thin films by selective alloying

    Part of Surface & Coatings Technology, p. 583-590, 2011.

  • Conference paper

    Hieke, André; Håkansson, Greger; Gustavsson, Fredrik; Forsberg, Peter et al.

    DLC coatings for fule injection components to minimize wear and friction in various fuels

    2011.

  • Conference paper

    Heinrichs, Jannica; Jacobson, Staffan

    Evaluation of TiB2 coatings in cold forming of aluminium

    2011.

  • Article in journal

    Wiklund, Urban; Rubino, Stefano; Kádas, Krisztina; Skorodumova, Natalia V. et al.

    Experimental and theoretical studies on stainless steel transfer onto a TiN-coated cutting tool

    Part of Acta Materialia, p. 68-74, 2011.

  • Article in journal

    Ropo, M; Kokko, K; Airiskallio, E; Punkkinen, M P J et al.

    First-principles atomistic study of surfaces of Fe-rich Fe-Cr

    Part of Journal of Physics, p. 265004-, 2011.

  • Article in journal

    André, Benny; Lewin, Erik; Jansson, Ulf; Wiklund, Urban

    Friction and contact resistance of nanocomposite Ti-Ni-C coatings

    Part of Wear, p. 555-566, 2011.

  • Conference paper

    Gustavsson, Fredrik; Polcar, Tomas; Cavaleiro, Albano; Jacobson, Staffan

    Hard low friction WSN coating deposited by magnetron sputtering: Sliding in dry nitrogen

    2011.

  • Conference paper

    Malmros, Martina; Wiklund, Urban

    Nanocomposite Ti-Ni-C Coatings for Electrical Contact Brush Applications

    2011.

  • Conference paper

    André, Benny; Wiklund, Urban

    Nanoindentation on micro pillars for determination of residual stress conditions of PVD coatings

    2011.

  • Article in journal

    Olofsson, Johanna; Gerth, Julia; Nyberg, Harald; Wiklund, Urban et al.

    On the influence from micro topography of PVD coatings on friction behaviour, material transfer and tribofilm formation

    Part of Wear, p. 204-2057, 2011.

  • Conference paper

    Olofsson, Johanna; Gerth, Julia; Nyberg, Harald; Wiklund, Urban et al.

    On the influence from micro topography of PVD coatings on friction behaviour, material transfer and tribofilm formation

    2011.

  • Conference paper

    Sundberg, Jill; Särhammar, Erik; Nyberg, Harald; Kubart, Tomas et al.

    Quaternary W-S-C-Ti films for tribological applications

    2011.

  • Article in journal

    Gerth, Julia; Larsson, Mats; Urban, Wiklund

    Survey of damage mechanisms on PVD coated HSS hobs used in Swedish gear manufacturing industry

    Part of Tribologia, p. 37-50, 2011.

  • Conference paper

    Jacobson, Staffan

    The brake pad surface – dynamic materials formation, disintegration and regeneration at the nanoscale

    2011.

  • Conference paper

    Heinrichs, Jannica; Staffan, Jacobson

    The influence from shape and size of tool surface defects on the occurrence of galling in cold forming of aluminium

    2011.

  • Article in journal

    Heinrichs, Jannica; Jacobson, Staffan

    The influence from shape and size of tool surface defects on the occurrence of galling in cold forming of aluminium

    Part of Wear, p. 2517-2524, 2011.

  • Conference paper

    Alfredsson, Sara; Nyberg, Harald; Hogmark, Sture; Jacobson, Staffan

    Tribological conditions of curling - the ultimate friction sport?

    Part of 18th International Conference on Wear of Materials, Philadelphia, USA, April 3-7, 2011, 2011.

  • Article in journal

    Forsberg, Peter; Hollman, Patrik; Jacobson, Staffan

    Wear mechanism study of exhaust valve system in modern heavy duty combustion engines

    Part of Wear, p. 2477-2484, 2011.

  • Conference paper

    Olofsson, Johanna; Grehk, Mikael; Persson, Cecilia; Jacobson, Staffan et al.

    Analysis of the wear and tribofilm formation on silicon nitride for total hip joint replacement

    Part of Asiatrib 2010, 2010.

  • Conference paper

    Gustavsson, Fredrik; Jacobson, Staffan

    Characterization and tribological properties of low-friction tribofilms formed on WS2 coatings in dry sliding: nanoparticle based coatings compared to sputtered coatings

    Part of ASIATRIB, 2010.

  • Article in journal

    Öberg, Å.; Kassman, Åsa; André, Benny; Wiklund, Urban et al.

    Conductive nanocomposite ceramics as tribological and electrical contact materials

    Part of European Physical Journal, p. 22902-, 2010.

  • Article in journal

    Wilhelmsson, Ola; Bijelovic, Stojanka; Lindquist, Mattias; André, Benny et al.

    Deposition and characterization of magnetic Ti–Fe–C nanocomposite thin films

    Part of Thin Solid Films, p. 2607-2616, 2010.

  • Conference paper

    Rubino, Stefano; Wiklund, Urban; Kádas, Krisztina; Skorodumova, Natalia V. et al.

    Electron Microscopy studies on stainless steel transfer onto a TiN coated cutting tool

    2010.

  • Conference paper

    Rubino, Stefano; Wiklund, Urban; Kádas, Krisztina; Skorodumova, Natalia V. et al.

    Electron Microscopy studies on stainless steel transfer onto a TiN coated cutting tool

    Part of 17th International Microscopy Congress - Rio de Janeiro19-24 September 2010, 2010.

  • Conference paper

    Riddar, Frida; Kassman Rudolphi, Åsa; Hogmark, Sture

    Frequency- and contact load dependency for pneumatic clutch actuators

    Part of Proceedings of NORDTRIB 2010 : 14th Nordic Symposium on Tribology, 2010.

  • Conference paper

    André, Benny; Wiklund, Urban

    Friction and wear dependence of nc-TiNiC:a-C by environment and test conditions

    2010.

  • Conference paper

    Gustavsson, Fredrik; Jacobson, Staffan

    Friction behaviour of Fullerene Like WS2 nanoparticles in a Ni-matrix compared to PVD WS2 and MoS2 coatings

    Part of ICMCTF, 2010.

  • Conference paper

    Heinrichs, Jannica; Jacobson, Staffan

    Influence from PVD coatings on galling tendency in cold forming

    2010.

  • Conference paper

    Nyberg, Harald; Olofsson, Johanna; Gerth, Julia; Wiklund, Urban et al.

    Influence on surface micro topography of HSS surfaces from argon ion etch cleaning

    2010.

  • Conference paper

    Gustavsson, Fredrik; Forsberg, Peter; Jacobson, Staffan

    Investigations of the friction behaviour and surface modifications for low-friction coatings in traditional and new alternative fuels

    Part of NordTrib 2010, 2010.

  • Article in journal

    Heinrichs, Jannica; Jacobson, Staffan

    Laboratory test simulation of aluminium cold forming – influence from PVD tool coatings on the tendency to galling

    Part of Surface & Coatings Technology, p. 3606-3613, 2010.

  • Conference paper

    Malmros, Martina; Wiklund, Urban

    Nanocomposite Coatings for Contact Brush Applications

    Part of Proceedings of the 4th International Tribology Congress, ASIATRIB2010, 2010.

  • Conference paper

    Nyberg, Harald; Olofsson, Johanna; Gerth, Julia; Wiklund, Urban et al.

    On the influence from micro topography on the structure and growth of low friction amorphous carbon PVD coatings

    Part of Twelfth International Conference on Plasma Surface Engineering (PSE 2010), September 13-17, 2010, Garmisch-Partenkirchen, 2010.

  • Conference paper

    Jacobson, Staffan

    Resistance to abrasive wear – fundamental and practical aspects: Keynote Lecture

    2010.

  • Article in journal

    Lewin, Erik; André, Benny; Urbonaite, Sigita; Wiklund, Urban et al.

    Synthesis, structure and properties of Ni-alloyed TiCx-based thin films

    Part of Journal of Materials Chemistry, p. 5950-5960, 2010.

  • Conference paper

    Heinrichs, Jannica; Jacobson, Staffan

    The Importance of Tool Surface Roughness on the Galling Tendencies in Cold Forming of Aluminium

    2010.

  • Conference paper

    Forsberg, Peter; Nyberg, Harald; Jacobson, Staffan; Hollman, Patrik et al.

    The Uppsala Load Scanner –Second generation

    Part of Nordtrib 2010, Storforsen, Sweden, 2010.

  • Chapter in book

    Jacobson, Staffan; Hogmark, Sture

    Tribofilms – On the crucial importance of tribologically induced surface modifications

    Part of Recent Developments in Wear Prevention, Friction and Lubrication, p. 197-225, 2010.

  • Conference paper

    Forsberg, Peter; Gustavsson, Fredrik; Jacobson, Staffan

    Tribological behaviour for low-friction coatings at conformal contact pressure in traditional and new-alternative fuels

    Part of ASIATRIB 2010,  PERTH, WESTERN AUSTRALIA, 5-9 DECEMBER 2010, 2010.

  • Article in journal

    Iwai, Yoshiro; Matsubara, Tohru; Hirai, Yuichi; Hogmark, Sture

    Development of a new type micro slurry-jet erosion (MSE) tester for evaluation of wear properties of hard thin coatings

    Part of Lubrication Science, p. 213-226, 2009.

  • Conference paper

    Rubino, Stefano; Hanson, Magnus; Hogmark, Sture; Leifer, Klaus

    EFTEM studies on the adhesion of stainless steel against a V40 steel forming tool

    Part of EDGE 2009 - International EELS Workshop, Banff, Canada 17-22 May 2009, 2009.

    Open access
  • Conference paper

    Iwai, Y; Miyajima, T; Mizuno, A; Asami, Y et al.

    Evaluation of Wear Properties of DLC Films by a Micro Slurry-Jet Erosion (MSE) Test

    Part of WOM 2009 in Las Vegas 19-23/4 2009, 2009.

  • Article in journal

    Lewin, Erik; Olsson, Erik; André, Benny; Joelsson, Torbjörn et al.

    Industrialisation Study of Nanocomposite nc-TiC/a-C Coatings for Electrical Contact Applications

    Part of Plasma Processes and Polymers, p. S928-S934, 2009.

  • Article in journal

    Olofsson, Johanna; Johansson, Stefan; Jacobson, Staffan

    Influence from humidity on the alumina friction drive system of an ultrasonic motor

    Part of Tribology International, p. 1467-1477, 2009.

  • Article in journal

    Hanson, Magnus; Hogmark, Sture; Jacobson, Staffan

    Influence from tool roughness on the risk of work material adhesion and transfer

    Part of Materials and Manufacturing Processes, p. 913-917, 2009.

  • Conference paper

    Heinrichs, Jannica; Jacobson, Staffan

    Influence of aluminium pre-treatment on galling in cold forming

    2009.

  • Article in journal

    Lindgren, M; Åstrand, M; Wiklund, Urban; Engqvist, Håkan

    Investigation of boundary conditions for biomimetic HA deposition on titanium oxide surfaces

    Part of Journal of materials science. Materials in medicine, p. 1401-1408, 2009.

  • Conference paper

    Heinrichs, Jannica; Jacobson, Staffan

    Laboratory test simulation of aluminium cold forming: influence from PVD coatings on the tool on the tendency to galling

    p. 87-92 2009.

  • Article in journal

    Heinrichs, Jannica; Jacobson, Staffan

    Laboratory test simulation of galling in cold forming of aluminium

    Part of Wear, p. 2278-2286, 2009.

  • Article in journal

    Iwai, Y.; Miyajima, T.; Mizuno, A.; Honda, T. et al.

    Micro-Slurry-jet Erosion (MSE) testing of CVD TiC/TiN and TiC coatings

    Part of Wear, p. 264-269, 2009.

  • Conference paper

    Olofsson, Johanna; Lindberg, Fredrik; Johansson, Stefan; Jacobson, Staffan

    On the role of tribofilm formation on the alumina drive components of an ultrasonic motor

    2009.

  • Article in journal

    Olofsson, Johanna; Lindberg, Fredrik; Johansson, Stefan; Jacobson, Staffan

    On the role of tribofilm formation on the alumina drive components of an ultrasonic motor

    Part of Wear, p. 1295-1300, 2009.

  • Conference paper

    Jacobson, Staffan; Hogmark, Sture

    On the Vital Importance of Dynamics and Modifications in tribological Surfaces-Illustrating Examples from Practical Applications

    2009.

  • Article in journal

    Gerth, Julia; Larsson, Mats; Wiklund, Urban; Riddar, Frida et al.

    On the wear of PVD-coated HSS hobs in dry gear cutting

    Part of Wear, p. 444-452, 2009.

  • Conference paper

    André, Benny; Gustavsson, Fredrik; Svahn, Fredrik; Jacobson, Staffan

    Performance and Tribofilm Formation of a Low-Friction Coating Incorporating Inorganic Fullerene Like Nano-Particles

    2009.

  • Conference paper

    André, Benny; Gustavsson, Fredrik; Svahn, Fredrik; Jacobson, Staffan

    Potential of a new low-friction coating based on inorganic fullerens: comparison with state-of-the-art PVD coatings

    p. 400- 2009.

  • Conference paper

    Broqvist, Natalia; Hogmark, Sture; Gunnarsson, S.

    Properties affecting machinability of hot work tool steels

    Part of Tool Steels - Deciding Factor in Worldwide Production, 2009.

  • Article in journal

    Gerth, Julia; Werner, Mathias; Larsson, Mats; Wiklund, Urban

    Reproducing wear mechanisms in gear hobbing: Evaluation of a single insert milling test

    Part of Wear, p. 2257-2268, 2009.

  • Article in journal

    Holmberg, Kenneth; Ronkainen, Helena; Laukkanen, Anssi; Wallin, Kim et al.

    Residual stresses in TiN, DLC and MoS2 coated surfaces with regard to their tribological fracture behaviour

    Part of Wear, p. 2142-2156, 2009.

  • Article in journal

    Jacobson, Staffan; Hogmark, Sture

    Surface modifications in tribological contacts

    Part of Wear, p. 370-378, 2009.

  • Article in journal

    Coronel, E; Wiklund, Urban; Olsson, E

    The effect of carbon content on the microstructure of hydrogen-free physical vapour deposited titanium carbide films

    Part of Thin Solid Films, p. 71-76, 2009.

  • Conference paper

    Olofsson, Johanna; Johansson, Stefan; Jacobson, Staffan

    The effect of grain size on the tribofilm formation on the alumina friction drive system of an ultrasonic motor

    Part of ECOTRIB 09, p. 965-970, 2009.

  • Article in journal

    Nilsson, D; Stavlid, N; Lindquist, M; Hogmark, Sture et al.

    The role of aluminum additions in the oxidation and wear of a TaC:C low-friction coating

    Part of Surface and Coatings Technology, p. 2989-2994, 2009.

  • Conference paper

    Olofsson, Johanna; Jacobson, Staffan

    The Role of Surface Treatment in the Tribofilm Formation on Alumina Friction Drive Components

    Part of World tribology congress 2009, Kyoto, 2009.

  • Article in journal

    Lindquist, Mattias; Wilhelmsson, Ola; Jansson, Ulf; Wiklund, Urban

    Tribofilm formation and tribological properties of TiC and nanocomposite TiAlC coatings

    Part of Wear, p. 379-387, 2009.

  • Article in journal

    Lindquist, Mattias; Wilhelmsson, Ola; Jansson, Ulf; Wiklund, Urban

    Tribofilm formation from TiC and nanocomposite TiAlC coatings, studied with Focused Ion Beam and Transmission Electron Microscopy

    Part of Wear, p. 988-994, 2009.

  • Conference paper

    Gerth, Julia; Wiklund, Urban

    Wear of an AlCrN coated HSS Hob in Dry Gear Cutting

    Part of HSS FORUM - Smart Solutions for the Future of Metal Cutting, 2009.

  • Article in journal

    Riddar, Frida; Kassman Rudolphi, Åsa; Hogmark, Sture

    Wear study of field worn clutch actuators and evaluation of a model test

    Part of Wear, p. 2269-2272, 2009.

  • Conference paper

    Riddar, Frida; Kassman Rudolphi, Åsa; Hogmark, Sture

    Wear tests of pneumatic cylinders of aluminium from permanent mould casting and extrusion

    Part of Proceedings of the 2nd European Conference on Tribology (ECOTRIB 2009), 2009.

  • Article in journal

    Beste, Ulrik; Jacobson, Staffan

    A new view of the deterioration and wear of WC/Co cemented carbide rock drill buttons

    Part of Wear, p. 1129-1141, 2008.

  • Article in journal

    Casas, B.; Wiklund, Urban; Lanes, L.M.; Hogmark, Sture

    Adhesion and abrasive wear resistance of TiN deposited on electrical discharge machined WC-Co cements rbides

    Part of Wear, p. 490-496, 2008.

  • Report

    Jacobson, Staffan

    Att skriva tekniska och vetenskapliga rapporter – Korta tips, regler och exempel för effektiv kommunikation i skrift

    2008.

  • Conference paper

    Jacobson, Staffan; Åstrand, Mikael

    Avoiding slip accidents – about the friction in walking on hard floorings

    2008.

  • Article in journal

    Duda, Laurent; Andersson, Joakim; Schmitt, Thorsten; Jacobson, Staffan

    Chemical modification in wear tracks of chemical vapor deposited diamond surfaces studied with X-ray absorption spectroscopy

    Part of Tribology letters, p. 31-34, 2008.

  • Conference paper

    André, Benny; Jacobson, Staffan

    Comparisons between commercial low-friction coatings and emerging coating concepts in ball-on-disc tests – coefficient of friction, tribofilm formation and surface damage

    2008.

  • Conference paper

    Öberg, Åke; Kassman Rudolphi, Åsa; Wiklund, Urban; André, Benny et al.

    Conductive nanocomposite ceramics as tribological and electrical contact materials

    Part of International Conference on Electrical Contacts, ICEC 2008, 2008.

  • Article in journal

    Hammerström, Lars; Jacobson, Staffan

    Designed high-friction surfaces: influence of roughness and deformation of the counter surface

    Part of Wear, p. 807-814, 2008.

  • Article in journal

    Hu, Qing-Miao; Kádas, Krisztina; Hogmark, Sture; Yang, Rui et al.

    Hardness and elastic properties of covalent/ionic solid solutions from first-principles theory

    Part of Journal of Applied Physics, p. 083505-, 2008.

  • Article in journal

    Lindberg, Fredrik; Heinrichs, Jannica; Ericson, Fredric; Thomsen, Peter et al.

    Hydroxylapatite growth on single-crystal rutile substrates

    Part of Biomaterials, p. 3317-3323, 2008.

  • Conference paper

    Heinrichs, Jannica; Jarmar, Tobias; Rooth, Mårten; Engqvist, Håkan

    In vitro bioactivity of Atomic Layer Deposited titanium dioxide on titanium and silicon substrates

    Part of BIOCERAMICS, VOL 20, PTS 1 AND 2, p. 689-692, 2008.

  • Conference paper

    Hanson, Magnus; Hogmark, Sture; Jacobson, Staffan

    Influence from tool roughness on the risk of work material adhesion and transfer

    2008.

  • Conference paper

    Olofsson, Johanna; Johansson, Stefan; Jacobson, Staffan

    Influences from humidity on the friction drive system of a piezoelectric motor

    2008.

  • Report

    Kassman Rudolphi, Åsa; Orvehed, Maria; Woldegiorgis, Sara

    Ingenjörsutbildningar vid Uppsala universitet. Studenter granskar några utbildningar ur genusperspektiv

    2008.

    Open access
  • Conference paper

    Heinrichs, Jannica; Jacobson, Staffan

    Lab test simulation of galling in cold forming of aluminium

    Part of NordTrib 2008, 2008.

  • Article in journal

    Hanson, Magnus; Stavlid, Nils; Coronel, Ernesto; Hogmark, Sture

    On adhesion and metal transfer in sliding contact between TiN and austenitic stainless steel

    Part of Wear, p. 781-787, 2008.

  • Article in journal

    Hanson, Magnus; Hogmark, Sture; Coronel, Ernesto; Persson, Daniel H.E.

    On adhesion of work material in metal forming

    Part of International journal of microstructure and materials properties, p. 401-412, 2008.

  • Conference paper

    Hogmark, Sture; Sturesson, Peter; Jacobson, Staffan

    On the mechanisms of friction between skis and snow and implications on how to prepare the skis for optimum glide

    2008.

  • Conference paper

    Broqvist, Natalia; Hogmark, Sture; Gunnarsson, S.; Björk, T. et al.

    On the relation between composition, oxidation and machinability of tool steels

    2008.

  • Conference paper

    Riddar, Frida; Kassman Rudolphi, Åsa; Hogmark, Sture

    On the wear of pneumatic clutch actuators

    Part of Proceedings of NORDTRIB 2008 : 13th Nordic Symposium on Tribology, 2008.

  • Article in journal

    Heinrichs, Jannica; Jarmar, Tobias; Wiklund, Urban; Engqvist, Håkan

    Physical vapour deposition and bioactivity of crystalline titanium dioxide thin films

    Part of Trends in Biomaterials & Artificial Organs, p. 104-110, 2008.

  • Conference paper

    Gerth, Julia; Werner, Mathias; Larsson, Mats; Wiklund, Urban

    Reproducing wear mechanisms in gear hobbing: evaluation of a single insert milling test

    Part of Proceedings of the International conference Nordtrib 2008, 2008.

  • Conference paper

    Holmberg, Kenneth; Ronkainen, H; Laukkanen, A; Wallin, K et al.

    Residual stresses in TiN, DLC and MoS2 coated surfaces with regard to their tribological fracture behaviour

    Part of Proceedings of the International conference Nordtrib 2008:, 2008.

  • Article in journal

    Beste, Ulrik; Jacobson, Staffan; Hogmark, Sture

    Rock penetration into cemented carbide drill buttons during rock drilling

    Part of Wear, p. 1142-1151, 2008.

  • Article in journal

    Beste, Ulrik; Jacobson, Staffan

    Targeting micro-sectioning: A technique to study subsurface features in worn specimens

    Part of Wear, p. 1152-1156, 2008.

  • Conference paper

    André, Benny; Lewin, Erik; Lindquist, Mattias; Jansson, Ulf et al.

    Tribological testing of ceramic coatings boosted for low friction and for use in electrical contacts

    2008.

  • Conference paper

    Olofsson, Johanna; Johansson, Stefan; Jacobson, Staffan

    Analysis of the tribofilm formation on the friction drive surfaces of a piezoelectric motor

    Part of ASME/STLE International Joint Tribology Conference, Parts A and B, p. 871-872, 2007.

  • Conference paper

    Hanson, Magnus; Gåård, A.; Hogmark, Sture; Bergström, J.

    Comparison between two test methods for avaluation of forming tool materials

    2007.

  • Article in journal

    Hanson, Magnus; Gåård, A.; Krakhmalev, P.; Hogmark, Sture et al.

    Comparison of two test methods for evaluation of forming tool materials

    Part of Tribotest, p. 147-158, 2007.

  • Article in journal

    Wilhelmsson, Ola; Råsander, Mikael; Carlsson, Mattias; Lewin, Erik et al.

    Design of Nanocomposite Low-Friction Coatings

    Part of Advanced Functional Materials, p. 1611-1616, 2007.

  • Conference paper

    Lewin, Erik; Wilhelmsson, Ola; Jansson, Ulf; Lindquist, Mattias et al.

    Design of sputtered nc-MeC/a-C nanocomposite coatings through doping with a second metallic element

    Part of E-MRS spring meeting 2007 (Strasbourg 28 maj - 1 juni), 2007.

  • Article in journal

    Hogmark, Sture; Jacobson, Staffan; Coronel, E.

    On adhesion in tribological contacts-Causes and consequences

    Part of Tribologia, p. 3-16, 2007.

  • Article in journal

    Hu, Qing-Miao; Kádas, Krisztina; Hogmark, Sture; Yang, R. et al.

    Predicting hardness of covalent/ionic solid solution from first-principles theory

    Part of Applied Physics Letters, p. 121918-, 2007.

  • Conference paper

    Jacobsson, Staffan; Hogmark, Sture

    Surface modifications in tribological contacts

    p. 599-612 2007.

  • Article in journal

    Pettersson, Ulrika; Jacobson, Staffan

    Textured surfaces for improved lubrication at high pressure and low sliding speed of roller/piston in hydraulic motors

    Part of Tribology International, p. 355-359, 2007.

  • Article in journal

    Pettersson, Ulrika; Jacobson, Staffan

    Textured surfaces in sliding boundary lubricated surfaces – mechanisms, possibilities and limitations

    Part of Tribology - Materials, Surfaces & Interfaces, p. 181-189, 2007.

  • Article in journal

    Gerth, Julia; Wiklund, Urban

    The influence of metallic interlayers on the adhesion of pVD TiN coatings on high-speed steel

    Part of Wear, p. 885-892, 2007.

  • Article in journal

    Ropo, M.; Kokko, K.; Punkkinen, M.P.J.; Hogmark, Sture et al.

    Theoretical evidence of the compositional threshold behavior of FeCr surfaces

    Part of Physical Review B. Condensed Matter and Materials Physics, p. 220401-1-220401-4, 2007.

  • Conference paper

    Lindquist, M; Wilhelmsson, O; Jansson, U; Wiklund, Urban

    Tribofilm formation and tribological properties of nanocomposite TiC and TiAlC coatings

    2007.

  • Conference paper

    Riddar, Frida; Kassman Rudolphi, Åsa; Jacobson, Staffan; Hogmark, Sture et al.

    Tribological surfaces of a pneumatic clutch actuator

    Part of Proceeding of ECOTRIB 2007, Slovenien Society for Tribology, June 12-15, 2007, p. 955-967, 2007.

  • Conference paper

    Andre, Benny; Kassman, Åsa; Jansson, U.

    Tribology of nanocomposite materials in electrical contacts

    2007.

  • Conference paper

    Gerth, Julia; Larsson, Mats; Wiklund, Urban

    Wear propagation of PVD AlCrN coated HSS hob in dry gear hobbing

    2007.

  • Article in journal

    Vitos, Levente; Larsson, Karin; Johansson, Börje; Hanson, Magnus et al.

    An atomistic approach to the initiation mechanism of galling

    Part of Computational materials science, p. 193-197, 2006.

  • Conference paper

    Jacobson, Staffan; Hogmark, Sture

    Coating materials optimised for lubricated contacts

    2006.

  • Article in journal

    Podgornik, B.; Hren, D.; Vizintin, J.; Jacobson, Staffan et al.

    Combiantion of DLC coatings and EP additivesfor improveds tribological behaviour of boundary lubricated surfaces

    Part of Wear, p. 32-, 2006.

  • Article in journal

    Podgornik, B; Hren, D; Vizintin, J; Jacobsson, Staffan et al.

    Combination of DLC coatings and EP additives for improved tribological behaviour of boundary lubricated surfaces

    Part of Wear, p. 32-40, 2006.

  • Conference paper

    Hammerström, Lars; Jacobsson, Staffan

    Designed High-friction surfaces - influence of roughness and deformation of the sountersurface

    2006.

  • Article in journal

    Wiklund, Urban; Stavlid, Nils; Hogmark, Sture

    Development of monolayered low friction PVD ceramic coatings for application on tools and mechanical components

    Part of Advances in Science and Technology, p. 122-131, 2006.

  • Conference paper

    Wiklund, Urban; Stavlid, Nils; Hogmark, Sture

    Development of monolayered low friction PVD ceramic coatings for application on tools and mechanical components

    Part of Advances in Science and Technology, p. 2750-, 2006.

  • Article in journal

    Hogmark, Sture; Jacobson, Staffan

    Editorial

    Part of Wear, p. 1-, 2006.

  • Article in journal

    Forsberg, Markus; Andersson, Joakim; Jacobson, Staffan

    Geometrically Defined All-Diamond Abrasive Surfaces for Pad Conditioning in Chemical Mechanical Polishing

    Part of J Electrochem Soc, p. G1-G6, 2006.

  • Conference paper

    Andersson, S; Larsson, R; Jacobson, Staffan; Höglund, E

    HiMeC - A Swedish Programme for research and Doctoral Studies

    2006.

  • Article in journal

    Podgornik, B.; Vizintin, J.; Hogmark, Sture

    Improvement in galling performance through surface engineering

    Part of Surface Engineering, p. 235-238, 2006.

  • Conference paper

    Coronel, Ernesto; Hanson, Magnus; Leifer, Klaus; Hogmark, Sture

    Mechanisms of Work Material Adhesion in Tooling Operations Revealed by TEM

    2006.

  • Conference paper

    Jacobson, Staffan

    Nature of tribological interface of automotive brakes in Advanced in asbestos-free friction composites

    2006.

  • Article in journal

    Svahn, Fredrik; Kassman-Rudolphi, Åsa; Hogmark, Sture

    On the effect of surface topography and humidity on lubricated running-in of a carbon based coating

    Part of Wear, p. 1237-1246, 2006.

  • Conference paper

    Jacobson, Staffan

    On the possiblities of designing static contact interfaces with strong grip

    2006.

  • Article in journal

    Persson, Daniel H. E.; Coronel, Ernesto; Jacobson, Staffan; Hogmark, Sture

    Surface analysis of laser cladded Stellite exposed to self-mated high load dry sliding

    Part of Wear, p. 96-100, 2006.

  • Article in journal

    Hammerström, Lars; Jacobson, Staffan

    Surface modification of brake discs to reduce squeal prob-lems

    Part of Wear, p. 53-57, 2006.

  • Article in journal

    Hammerström, Lars; Jacobson, Staffan

    Surface modification of brake discs to reduce squeal problems

    Part of Wear, p. 53-57, 2006.

  • Article in journal

    Pettersson, Ulrika; Jacobson, Staffan

    Tribological texturing of steel surfaces with a novel diamond embossing tool technique

    Part of Tribology International, p. 695-700, 2006.

  • Article in journal

    Beste, Ulrik; Coronel, Ernesto; Jacobson, Staffan

    Wear induced material modification of cemented carbide rock drills

    Part of Int. Journal of Refractory Metals and Hard Materials, p. 168-176, 2006.

  • Article in journal

    Beste, Ulrik; Coronel, Ernesto; Jacobson, Staffan

    Wear induced material modifications of cemented carbide rock drill buttons

    Part of International journal of refractory metals & hard materials, p. 168-176, 2006.

  • Conference paper

    Andersson, Joakim; Forsberg, Markus; Hollman, Patrik; Jacobson, Staffan

    A geometrically defined all-diamond pad conditioner

    Part of World Tribology Congress III, Washington., 2005.

  • Conference paper

    Jacobson, Staffan; Kälvesten, Ellen; Pettersson, Ulrika

    Effect of surface textures in highly loaded grease lubricated reciprocating sliding contacts

    Part of World Tribology Congress III, Washington., 2005.

  • Conference paper

    Persson, Daniel; Hammerström, Lars; Jacobson, Staffan; Hogmark, Sture

    High Resolution Characterisation of Friction Induced Deformation using the FIB

    Part of International Tribology Conference, Kobe., 2005.

  • Article in journal

    Podgornik, Bojan; Jacobson, Staffan; Hogmark, Sture

    Influence of EP additive concentration on the tribological behaviour of DLC-coated steel surfaces

    Part of Surface and Coatings Technology, p. 357-366, 2005.

  • Conference paper

    Hogmark, Sture; Svahn, Fredrik; Stavlid, Nils; Wiklund, Urban et al.

    Possibilities for Optimisation of Low friction coatings

    Part of International Tribology Conference, Kobe., 2005.

  • Conference paper

    Hammerström, Lars; Jacobson, Staffan

    Reduction of Brake Squeal using Brake Disc Surface Modifications

    Part of International Tribology Conference, Kobe., 2005.

  • Article in journal

    Persson, A; Hogmark, Sture; Bergström, J

    Therma fatigue cracking of surface engineered hot work tool steel

    Part of Surface and Coatings Technology, p. 216-227, 2005.

  • Conference paper

    Jacobson, Staffan; Hogmark, Sture

    Tribological conditions for successful solid lubrication

    Part of International Tribology Conference, Kobe., 2005.

  • Conference paper

    Hammam, Tag; Per, Lundström; Kassman Rudolphi, Åsa

    Vibration-induced deterioration of tin-coated conncetors studied by using a force controlled fretting bench-test

    Part of Proc. 51st IEEE Holm Conf. on Electrical Contacts, p. 97-106, 2005.

  • Article in journal

    Hogmark, Sture; Olsson, Mikael

    Wear mechanisms of HSS cutting tools

    Part of SME (Society of Manufacturing Engineeres) Technical Paper, p. 1-14, 2005.

  • Conference paper

    Hogmark, Sture; Olsson, Mikael

    Wear mechanisms of HSS metal cutting tools

    Part of Proceedings of the 1st International HSS Forum Conference : Smart Solutions for Metal Cutting, February 2-3, 2005, Aachen, Germany., 2005.

  • Article in journal

    Carlsson, Mattias; Wiklund, Urban

    A comparative evaluation method for low friction coatings in dry sliding thrust bearings

    Part of Tribologia, p. 27-36, 2004.

  • Article in journal

    Nilsson, Daniel; Wiklund, Urban

    A flexible laboratory-scale approach to alloying and tailoring of thin films by single-magnetron co-sputtering

    Part of Thin Solid Films, p. 10-15, 2004.

  • Article in journal

    Podgornik, B; Hogmark, Sture; Pezdirnik, J

    Comparison between different test methods for evaluation of galling properties of surface engineered tool surfaces

    Part of Wear, p. 843-851, 2004.

  • Conference paper

    Persson, Daniel; Coronel, Ernesto; Jacobson, Staffan; Hogmark, Sture

    Contact pressure induced shifts in the friction behaviour of laser processed stellite

    p. 340- 2004.

  • Article in journal

    Persson, A; Hogmark, Sture; Bergström, J

    Failure modes in field tested brass die casting dies,

    Part of Journal of Materials Processing Technology, p. 108-118, 2004.

  • Article in journal

    Pettersson, Ulrika; Jacobson, Staffan

    Friction and wear properties of micro textured DLC coated surfaces in boundary lubricated contacts

    Part of Tribology letters, p. 553-559, 2004.

  • Conference paper

    Hogmark, Sture

    Friction Mechanisms of Coated Tribological Components

    Part of Proceedings of the VTI conference Challenges in Surface Engineering, Ghent, Belgium,, 2004.

  • Conference paper

    Hogmark, Sture; Sandberg,, Odd

    Influence of surface roughness and coating type on galling properties of forming tools

    Part of Int. Conf. on Recent Advances in Manufacture & Use of Tools and Dies, and Stamping of Steel Sheets, Olofström, Sweden, 2004.

  • Article in journal

    Podgornik,, B; Sandberg, O; Hogmark, Sture

    Influence of surface roughness and coating type on the galling properties of coated forming tool steel

    Part of Surface and Coatings Technology, p. 338-348, 2004.

  • Conference paper

    Hogmark, Sture; Nilsson, Daniel; Svahn, Fredrik; Ignberg, L

    Interactive Tribological Coatings

    Part of COST 532 Conference in Ghent, p. 68-75, 2004.

  • Article in journal

    Beste, Ulrik; Lundvall, A; Jacobson, Staffan

    Micro-scratch evaluation of rock types - a means to comprehend rock drill wear

    Part of Trib. Int, p. 203-210, 2004.

  • Article in journal

    Longtin, R; Fauteux, C; Coronel, Ernesto; Wiklund, Urban et al.

    Nanoindentation of carbon microfibers deposited by laser-assisted chemical vapor deposition

    Part of Appl. Phys. A, p. 573-577, 2004.

  • Conference paper

    Beste, Ulrik; Jacobson, Staffan

    Penetrated rock as a weakening mechanism in cemented carbide rock drill wear.

    Part of Nordtrib 2004, Tromsö, Norway, p. 627–636-, 2004.

  • Conference paper

    Andersson, Joakim; Schmitt, Thorsten; Duda, Laurent; Jacobson, Staffan

    Phase transformations in CVD diamond wear tracks revealed by NEXAFS mapping

    Part of Nordtrib 2004, Tromsö, Norway, 2004.

  • Article in journal

    Pallas, A.; Engqvist, Håkan; Jacobson, Staffan; Hermansson, Leif

    Scratch Testing of a Dental Restorative Material based on Calcium Aluminate

    Part of Ceramic Engineering and Science Proc, p. 577-, 2004.

  • Conference paper

    Pallas, A.; Engqvist, Håkan; Jacobson, Staffan; Hermansson, Leif

    Scratch testing of a dental restorative material based on calcium aluminate

    Part of 28 th International Cocoa Beach Conference and Exposition on Advanced Ceramics & Composites, Cocoa Beach, 2004.

  • Article in journal

    Westergård, Rickard; Hogmark, Sture

    Sealing to improve the wear characteristics of sprayed alumina through electro-deposited Ni

    Part of Wear, p. 1153-1162, 2004.

  • Article in journal

    Westergård, Richard; Hogmark, Sture

    Sealing to improve the wear of properties of plasma sprayed alumina by electro-deposited Ni

    Part of www.sciencedirect.com, 2004.

  • Article in journal

    Persson, A; Hogmark, Sture; Bergström, J

    Simulation and evaluation of thermal fatigue cracking of hot work tool steel

    Part of International Journal of Fatigue, p. 1095-1107, 2004.

  • Conference paper

    Hogmark, Sture

    Surface engineering - Which are the gains

    Part of VTI conference Challenges in Surface Engineering, Ghent,, 2004.

  • Conference paper

    Hammerström, Lars; Jacobson, Staffan

    Surface modification of brake discs to reduce squealing problems."

    Part of Nordtrib 2004, Tromsö, Norway, 2004.

  • Article in journal

    Persson, A; Hogmark, Sture; Bergström, J

    Temperature profiles and conditions for thermal fatigue cracking in brass die casting dies

    Part of Journal of Materials Processing Technology, p. 228-236, 2004.

  • Conference paper

    Pettersson, Ulrika; Jacobson, Staffan

    The effect of embossed surface textures on the friction and wear in a boundary lubricated contact

    Part of Nordtrib 2004, Tromsö, Norway, 2004.

  • Article in journal

    Podgornik, B; Vizintin, J; Jacobson, Staffan; Hogmark, Sture

    Tribological behaviour of WC/C coatings operating under different lubrication regimes.

    Part of Surface and Coatings Technology, p. 558-565., 2004.

  • Article in journal

    Westergård, Rickard; Hogmark, S; Vuoristo, P

    Tribological properties of sprayed alumina coatings sealed by electro-deposition of Cu

    Part of Wear, p. 1163-1175, 2004.

  • Article in journal

    Podgornik, B.; Hogmark, Sture; Sandberg, O

    Wear and friction properties of coatings for forming tools

    Part of Strojniski vestnik – Journal of Mechanical Engineering, p. 156-, 2004.

  • Conference paper

    Beste, Ulrik; Coronel, Ernesto; Jacobson, Staffan

    Wear induced material modification of cemented carbide rock drills

    Part of Conf on Hard Materials, Puert Rico, 2004.

  • Conference paper

    Hogmark, Sture; Olsson, M

    Wear mechanisms of HSS metal cutting tools

    Part of Proceedings of the 1st International HSS Forum Conference : Smart Solutions for Metal, 2004.

  • Other

    Hogmark, Sture

    Biographical item: "Olof Vingsbo - Obituary" in Tribology International, Vol 36, Issue 7, pp 493-494

    2003.

  • Article in journal

    Pettersson, Ulrika; Jacobson, Staffan

    Influence of surface texture on boundary lubricated sliding contacts

    Part of Tribology International, p. 857-864, 2003.

  • Article in journal

    Nilsson, Daniel; Svahn, Fredrik; Wiklund, Urban; Hogmark, Sture

    Low-friction carbon-rich carbide coatings deposited by co-sputtering

    Part of Wear, p. 1084 1084-1091 1091, 2003.

  • Article in journal

    Nilsson, Daniel; Svahn, Fredrik; Wiklund, Urban; Hogmark, Sture

    Low-friction carbon-rich carbide coatings deposited by co-sputtering

    Part of Wear, p. 1084 1084-1091 1091, 2003.

  • Article in journal

    Nilsson, Daniel; Svahn, Fredrik; Wiklund, Urban; Hogmark, Sture

    Low-friction carbon-rich carbide coatings deposited by co-sputtering

    Part of Wear, p. 1084 1084-1091 1091, 2003.

  • Article in journal

    Westergård, Richard; Svahn, Fredrik; Wiklund, Urban

    Novel load-carrying layers to support low-friction PVD coatings

    Part of Surface and Coatings Technology, p. 14 14-22 22, 2003.

  • Article in journal

    Westergård, Rickard; Svahn, Fredrik; Wiklund, Urban

    Novel load-carrying layers to support low-friction PVD coatings

    Part of Surface and Coatings Technology, p. 14 14-22 22, 2003.

  • Article in journal

    Svahn, Fredrik; Kassman Rudolphi, Åsa; Wallén, Erik

    The influence of surface roughness on friction and wear of machine element coatings

    Part of Wear, p. 1092-1098, 2003.

  • Article in journal

    Wänstrand, Olle; Kassman Rudolphi, Åsa; Hogmark, Sture

    Design of low weight components: a theoretical approach

    Part of Surface Engineering, p. 93-97, 2002.

  • Article in journal

    Gunnars, J; Wiklund, U

    Determination of growth-induced strain and thermoelastic properties of coatings by curvature measurements

    Part of Materials Science and Engineering A, p. 7-21, 2002.

  • Conference paper

    Nilsson, D; Coronel, E; Wiklund, U

    Effects of substrate bias polarity on tribological a-C:Ta coatings

    Part of AUSTRIB ´02, Perth, 2002.

  • Conference paper

    van, Dijk P; Kassman Rudolphi, Åsa; Klaffke, D

    Investigations on electrical contacts subjected to fretting motion

    Part of ICEC - 21st Int. Conf. on Electrical Contacts, Zurich, 2002.

  • Article in journal

    Wänstrand, Olle; Schwarzer, N.; Chudoba, T.; Kassman Rudolphi, Åsa

    Load-carrying capacity of Ni-plated media in spherical indentation: experimental and theoretical results

    Part of Surface Engineering, p. 98-104, 2002.

  • Conference paper

    Svahn, F; Kassman Rudolphi, Åsa

    Sliding wear and rolling contact fatigue of rough low friction coatings

    Part of Frontiers in Tribology, 2002.

  • Article in journal

    Crossley, A; Johnston, C; Hutchings, I M; Myhra, S et al.

    Surface treatment for galling protection of titanium alloys: characterization by surface-specific electron and Raman spectroscopies

    Part of Thin Solid Films, p. 224-230, 2002.

  • Conference paper

    Svahn, Fredrik; Kassman Rudplphi, Åsa; Wallén, Erik

    The influence of surface roughness on friction and wear of machine element coatings

    2002.

  • Conference paper

    Svärd, L; Kassman Rudolphi, Åsa; Hogmark, Sture

    Tribological properties of brush plated coatings

    Part of 2nd ASIATRIB International Conference, Seoul, October 21-23, 2002: Proceedings, p. 171-, 2002.

  • Conference paper

    Hammam, T; Kassman, Rudolphi Åsa; Ignberg, L

    Friction, wear and electric properties of lubricated tin-coated contact terminals

    Part of Proc. 34th Annual Connector & Interconnection Technology Symp., Anaheim, CA, USA, Oct. 1-3, 2001.

  • Chapter in book

    Hogmark, S; Jacobson, S; Larsson, M; Wiklund, Urban

    Mechanical and tribological requirements and evaluation of coating composites

    Part of Modern Tribology Handbook, p. 931-960, 2001.

  • Article in journal

    Wänstrand, Olle; Larsson, M; Kassman Rudolphi, Åsa

    An experimental method for evaluation of the load carrying capacity of coated aluminium: the influence of coating stiffness, hardness and thickness

    Part of Surface & Coatings Technology, p. 107-113, 2000.

  • Conference paper

    Zheng, Jie; Ekström, Thommy C.; Axén, Niklas; Kassman Rudolphi, Åsa et al.

    Carbide-metal phase interpenetrated double skeleton microstructures

    Part of 24th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures, 2000.

  • Article in journal

    Wiklund, U; Nordin, M; Wänstrand, O; Larsson, M

    Evaluation of a flexible physical vapor deposited TiC-C coating system

    Part of Surface & Coatings Technology, p. 154-161, 2000.

  • Conference paper

    Kassman Rudolphi, Åsa

    Fretting degradation of PVD coated copper and aluminium

    Part of NORDTRIB 2000, p. 481-, 2000.

  • Conference paper

    Kassman, Rudolphi Åsa

    Fretting testing of electrical contacts at small displacement amplitudes: Experiences from a BriteEuram project

    Part of Proc. 20. International Conference on Electrical Contacts (ICEC), Stockholm, 06/2000, p. 471-476, 2000.

  • Article in journal

    Engqvist, Håkan; Wiklund, Urban

    Mapping of mechanical properties of WC-Co using nanoindentation

    Part of Tribology letters, p. 147-152, 2000.

  • Article in journal

    Wänstrand, Olle; Larsson, M.; Kassman Rudolphi, Åsa

    Mechanical and tribological properties of vapour deposited low friction coatings on Ni plated substrates

    Part of Tribology International, p. 737-742, 2000.

  • Article in journal

    Gåhlin, Rickard; Bjorkman, Henrik; Rangsten, Pelle; Jacobson, Staffan

    Designed abrasive diamond surfaces

    Part of WEAR, p. 387-394, 1999.

  • Article in journal

    Nordin, M; Herranen, Merja; Hogmark, Sture

    Influence of lamellae thickness on the corrosion behaviour of multilayered PVD TiN CrN coatings

    Part of THIN SOLID FILMS, p. 202-209, 1999.

  • Article in journal

    Wiklund, U; Gunnars, J; Hogmark, S

    Influence of residual stresses on fracture and delamination of thin hard coatings

    Part of Wear, p. 262-269, 1999.

  • Article in journal

    Berger, M; Wiklund, U; Eriksson, M; Engqvist, H et al.

    The multilayer effect in abrasion: optimising the combination of hard and tough phases

    Part of Surface & Coatings Technology, p. 1138-1144, 1999.

  • Article in journal

    Herranen, Merja; Wiklund, U; Carlsson, Jan-Otto; Hogmark, S

    Corrosion behaviour of Ti/TiN multilayer coated tool steel

    Part of SURFACE & COATINGS TECHNOLOGY, p. 191-196, 1998.

  • Article in journal

    Wiklund, U; Bromark, M; Larsson, M; Hedenqvist, P et al.

    Cracking resistance of thin hard coatings estimated by four-point bending

    Part of Surface and coatings technology, p. 57-63, 1997.

  • Article in journal

    Kassman Rudolphi, Åsa; Jacobson, Staffan

    On the use of ceramic PVD coatings to replace metallic coatings in electrical contacts.

    Part of Surface & Coatings Technology, p. 270-278, 1997.

  • Article in journal

    Kassman Rudolphi, Åsa; Jacobson, Staffan

    Stationary loading, fretting and sliding of silver coated copper contacts: Influence of corrosion films and corrosive atmosphere

    Part of Tribology International, p. 165-175, 1997.

  • Conference paper

    Kassman Rudolphi, Åsa; Jacobson, Staffan

    The contact resistance of rolling silver coated copper contacts

    Part of Proc. 43rd IEEE Holm Conf. on Electrical Contacts, p. 33-40, 1997.

  • Article in journal

    Hollman, P; Hedenqvist, P; Hogmark, S; Stenberg, G et al.

    Tribological evaluation of thermally activated CVD diamond-like carbon (DLC) coatings

    Part of SURFACE & COATINGS TECHNOLOGY, p. 230-235, 1997.

  • Article in journal

    Kassman Rudolphi, Åsa; Jacobson, Staffan

    Gross plastic fretting - examination of the gross weld regime.

    Part of Wear, p. 255-264, 1996.

  • Article in journal

    Kassman Rudolphi, Åsa; Jacobson, Staffan

    Gross plastic fretting - mechanical deterioration of silver coated electrical contacts.

    Part of Wear, p. 244-254, 1996.

  • Conference paper

    Kassman Rudolphi, Åsa; Jacobson, Staffan

    The role of gross plastic fretting in serviceability and deterioration of power contacts

    p. 352-362 1996.

  • Article in journal

    Kassman Rudolphi, Åsa

    Tribologi i elektriska kontakter: en problempresentation

    Part of Tribologia, p. 16-36, 1996.

  • Doctoral thesis, comprehensive summary

    Tribology of electrical contacts

    deterioration of silver coated copper Kassman Rudolphi, Åsa

  • Conference paper

    Kassman Rudolphi, Åsa; Imrell, T; Björkman, C; Jacobson, S

    Conduction through corrosion films on silver plated copper in power contacts

    Part of Proceedings of the Forty-First IEEE Holm Conference on Electrical Contacts, p. 124-134, 1995.

  • Conference paper

    Imrell, T; Sjövall, R; Kassman, Åsa

    The composition of the silver coating strongly influences the stability of stationary electrical contacts

    1994.

  • Article in journal

    Kassman, Åsa; Jacobson, Staffan

    Surface damage, adhesion and contact resistance of siler coated plated copper contacts subjected to fretting motion

    Part of Wear, p. 227-230, 1993.

  • Article in journal

    Kassman, Åsa; Jacobson, Staffan; Erickson, Lynn; Hedenqvist, Per et al.

    A new test method for the intrinsic abrasion resistance of thin coatings

    Part of Surface & Coatings Technology, p. 75-84, 1991.

  • Article in journal

    Hedenqvist, Per; Olsson, Mikael; Kassman, Åsa; Wallen, Per et al.

    How TiN coatings improve the performance of high speed steel cutting tools.

    Part of Surface & Coatings Technology, p. 243-256, 1990.

  • Manuscript (preprint)

    Larsson, Elin; Olander, Petra; Staffan, Jacobson

    Boric acid as fuel additive: Friction experiments and reflections around its effect on fuel saving

  • Manuscript (preprint)

    Ajaxon, Ingrid; Holmberg, Anders; Öhman-Mägi, Caroline; Persson, Cecilia

    Compressive fatigue properties of a high-strength, degradable calcium phosphate bone cement – influence of porosity and environment

  • Article in journal

    Heldin, Magnus; Wiklund, Urban

    Defibration mechanisms and energy consumption in the grinding zone – a lab scale equipment and method to evaluate groundwood pulping tools

  • Manuscript (preprint)

    André, Benny; Kassman-Rudolphi, Åsa; Wiklund, Urban

    Enhancing silver through embedding of fullerene like WS2 for sliding electrical contacts

  • Article in journal

    Heldin, Magnus; Wiklund, Urban

    Evaluation of well-defined tool surface designs for groundwood pulping

  • Manuscript (preprint)

    Heldin, Magnus; Wiklund, Urban

    Influence of alignment between extended tool ridges and the wood structure on the defibration mechanisms in groundwood pulping experiments

  • Article in journal

    Heldin, Magnus; Wiklund, Urban

    Influences of load and temperature on groundwood pulping with well-defined tools

    Part of Wear

  • Article in journal

    Carlsson, Jenny; Heldin, Magnus; Isaksson, Per; Wiklund, Urban

    Investigating tool engagement in groundwood pulping – finite element modelling and in-situ observations at the microscale

  • Article in journal

    Westlund, Viktoria; Heinrichs, Jannica; Jacobson, Staffan

    Investigation of material transfer in sliding friction-topography or surface chemistry?

    Part of Tribology International

  • Manuscript (preprint)

    André, Benny; Hollman, Patrik; Wiklund, Urban

    Nanoindentation on micro pillars for determination of intrincic hardness and residual stress in coatings deposited on complex geometries

  • Article in journal

    Westergård, R; Svahn, F; Wiklund, Urban

    Novel load carrying layers to support low friction PVD coatings

    Part of Surf. Coat. Technol.

  • Manuscript

    Svahn, Fredrik; Kassman Rudolphi, Åsa

    Running-in ability of a carbon coating sliding against itself or steel in a lubricated contact

  • Manuscript

    Svahn, Fredrik; Kassman Rudolphi, Åsa; Stavlid, Nils

    Running-in ability of carbon coatings with different Cr-composition at the surface

  • Manuscript (preprint)

    Lind, Jonna; Kassman Rudolphi, Åsa

    Surface and subsurface deformation of polyamide and poly-ether-ether-ketone composites sliding against steel cylinders

  • Manuscript

    Nilsson, Daniel; Stavlid, Nils; Carlsson, Mattias; Wiklund, Urban et al.

    The role of aluminium additions in the oxidation and wear of a TaC:C low-friction coating

  • Manuscript

    Nilsson, Daniel; Stavlid, Nils; Lindquist, Mattias; Wiklund, Urban et al.

    The role of aluminium additions in the oxidation and wear of TaC:C low-friction coating

  • Article in journal

    Lindquist, M.; Wilhelmsson, O.; Jansson, U.; Wiklund, U.

    Tribofilm formation from TiC and nanocomposite TiAlC coatings, analysis by means of FIB and TEM

  • Manuscript (preprint)

    Elo, Robin; Jacobson, Staffan

    Tribofilm formation on combustion engine valves ­– influence of additive content in the oil