Our publications

Carlsson, J., Isaksson, P. (2019).
Crack dynamics and crack tip shielding in a material containing pores analysed by a phase field method.
Engineering Fracture Mechanics, 206: 526-540 DOI
Chen, S., Isaksson, P. (2019).
A note on the defect sensitivity of brittle solid foams.
Engineering Fracture Mechanics, . 206: 541-550 DOI
Espadas Escalante, J. (2019).
On numerical analyses of woven composite laminates: Homogenization, damage and fracture.
Diss. Download fulltext
Espadas-Escalante, J., Bednarcyk, B., Pineda, E., Isaksson, P. (2019).
Modeling the influence of layer shifting on the properties and nonlinear response of woven composites subject to continuum damage.
Composite structures, . 220: 539-549 DOI
Espadas-Escalante, J., Isaksson, P. (2019).
A study of induced delamination and failure in woven composite laminates subject to short-beam shear testing.
Engineering Fracture Mechanics, 205: 359-369 DOI
Espadas-Escalante, J., Isaksson, P. (2019).
Mesoscale analysis of the transverse cracking kinetics in woven composite laminates using a phase-field fracture theory.
Engineering Fracture Mechanics, 216 DOI
Espadas-Escalante, J., van Dijk, N., Isaksson, P. (2019).
A phase-field model for strength and fracture analyses of fiber-reinforced composites.
Composites Science And Technology, . 174: 58-67 DOI
Heldin, M., Carlsson, J., Isaksson, P., Wiklund, U. (2019).
On tool engagement in groundwood pulping - in-situ observations and numerical modelling at the microscale.
I The 11th Fundamental Mechanical Pulp Research Seminar, Norrköping, Sweden, April 2-4
Huč, S. (2019).
Moisture-Induced Strains and Stresses in Wood.
Diss. Download fulltext
Jonsson, H., Öhman-Mägi, C., Alderborn, G., Isaksson, P., Frenning, G. (2019).
Crack nucleation and propagation in microcrystalline-cellulose based granules subject to uniaxial and triaxial load.
International Journal of Pharmaceutics, 559: 130-137 DOI
Luthander, R., Nilsson, A., Widén, J., Åberg, M. (2019).
Graphical analysis of photovoltaic generation and load matching in buildings: A novel way of studying self-consumption and self-sufficiency.
Applied Energy, . 250: 748-759 DOI
Marthin, O., Gamstedt, E. (2019).
Damage shielding mechanisms in hierarchical composites in nature with potential for design of tougher structural materials.
Royal Society Open Science, 6(3) DOI
Psimopoulos, E., Bee, E., Widén, J., Bales, C. (2019).
Techno-economic analysis of control algorithms for an exhaust air heat pump system for detached houses coupled to a photovoltaic system.
Applied Energy, . 249: 355-367 DOI
Shepero, M., Munkhammar, J., Widén, J. (2019).
A generative hidden Markov model of the clear-sky index.
Journal of Renewable and Sustainable Energy, 11(4) DOI
Sun, F., Gamstedt, E. (2019).
Experimental and numerical investigation on shear banding during nanomachining of an amorphous glassy polymer.
International Journal of Mechanical Sciences, 151: 13-21 DOI
Tavares da Costa, M., Bolinsson, J., Fayet, P., Gamstedt, E. (2019).
Mechanical investigations to obtain adhesive and cohesive properties of the ultrathin metal coatings on polymers films.
I SVC’s 62nd annual Technical Conference and Exhibition (TechCon), April 27-May 2 2019, Long Beach, California, USA
Tavares da Costa, M., Bolinsson, J., Fayet, P., Gamstedt, E. (2019).
A study of the fracture behaviour of ultrathin coatings on a polymer substrate.
I Svenska Mekanikdagar 11-12 juni 2019, KTH, Stockholm, Sweden
Tavares da Costa, M., Bolinsson, J., Neagu, R., Fayet, P., Gamstedt, E. (2019).
Experimental assessment of micromechanical models for fragmentation analysis of thin metal oxide coatings on polymer films under uniaxial tensile deformation.
Surface & Coatings Technology, . 370: 374-383 DOI
van Dijk, N., Wu, D., Persson, C., Isaksson, P. (2019).
A global digital volume correlation algorithm based on higher-order finite elements: Implementation and evaluation.
International Journal of Solids and Structures, . 168: 211-227 DOI
Vorobyev, A., van Dijk, N., Gamstedt, E. (2019).
Orthotropic creep in polyethylene glycol impregnated archaeological oak from the Vasa ship.
Mechanics of time-dependant materials, 23(1): 35-52 DOI
Carlsson, J. (2018).
Snabba brott i trä.
I Ekmandagarna, 30 – 31 January, Stockholm
Carlsson, J., Isaksson, P. (2018).
Dynamic crack propagation in wood fibre composites analysed by high speed photography and a dynamic phase field model.
International Journal of Solids and Structures, . 144-145: 78-85 DOI
Carlsson, J., Isaksson, P. (2018).
Dynamic crack propagation and crack tip shielding in porous materials analyzed by the phase field method for fracture.
I ECCM VI & ECFD VII, 11–15 June 2018, Glasgow, UK
Chen, S., Isaksson, P. (2018).
An experimental analysis of the defect sensitivity of solid foams.
Theoretical and applied fracture mechanics (Print), . 96: 768-774 DOI
Espadas-Escalante, J., van Dijk, N., Isaksson, P. (2018).
The effect of free-edges and layer shifting on intralaminar and interlaminar stresses in woven composites.
Composite structures, 185: 212-220 DOI
Gamstedt, E., Afshar, R., Ahlgren, A. (2018).
Preserving the Vasa ship: Research and development of a new support structure.
I 29th Annual International SICOMP conference on Manufacturing and Design of Composites, Luleå, 2018.
Gamstedt, E., Sun, F. (2018).
Polymer physics in nanoscale cutting: Opportunities for improved control in nano-manufacturing?.
I the 6th International Conference on Nanomanufacturing, UK, 2018., . 13-19
Huc, S., Hozjan, T., Svensson, S. (2018).
Rheological behavior of wood in stress relaxation under compression.
Wood Science and Technology, . 52(3): 793-808 DOI
Huc, S., Svensson, S. (2018).
Influence of grain direction on the time-dependent behavior of wood analyzed by a 3D rheological model: A mathematical consideration.
Holzforschung, . 72(10): 889-897 DOI
Huc, S., Svensson, S. (2018).
Coupled two-dimensional modeling of viscoelastic creep of wood.
Wood Science and Technology, . 52(1): 29-43 DOI
Huc, S., Svensson, S., Hozjan, T. (2018).
Hygro-mechanical analysis of wood subjected to constant mechanical load and varying relative humidity.
Holzforschung, . 72(10): 863-870 DOI
Huo, J., van Dijk, N., Gamstedt, E. (2018).
Elastic properties of rhombic mesh structures based on computational homogenisation.
Engineering structures, . 172: 66-75 DOI
Krasnoshlyk, V., du Roscoat, S., Dumont, P., Isaksson, P. (2018).
Influence of the local mass density variation on the fracture behavior of fiber network materials.
International Journal of Solids and Structures, 138: 236-244 DOI
Krasnoshlyk, V., du Roscoat, S., Dumont, P., Isaksson, P., Ando, E. et al. (2018).
Three-dimensional visualization and quantification of the fracture mechanisms in sparse fibre networks using multiscale X-ray microtomography.
Proceedings of the Royal Society. Mathematical, Physical and Engineering Sciences, . 474(2215) DOI
Liu, C., Qiu, Z., Brant, W., Younesi, R., Ma, Y. et al. (2018).
A free standing Ru–TiC nanowire array/carbon textile cathode with enhanced stability for Li–O2 batteries.
Journal of Materials Chemistry A, 6: 23659-23668 DOI
Saxén, C., Gamstedt, E., Afshar, R., Paulsson, G., Sahlen, F. (2018).
A Micro-Computed Tomography Investigation of the Breakdown Paths in Mica/Epoxy Machine Insulation.
IEEE transactions on dielectrics and electrical insulation, . 25(4): 1553-1559 DOI
Sun, F., Li, H., Leifer, K., Gamstedt, E. (2018).
Effect of nanosectioning on surface features and stiffness of an amorphous glassy polymer.
Polymer Engineering and Science, 58(10): 1849-1857 DOI
Tavares da Costa, M., Bolinsson, J., Fayet, P., Gamstedt, E. (2018).
Experimental and numerical investigations to assess the interfacial strength of the ultrathin coatings on polymers substrates.
I 6th European Conference on Computational Mechanics (ECCM 6), Glasgow, UK, 11-15 June 2018 .
Tavares da Costa, M., Neagu, C., Fayet, P., Wiklund, U., Li, H. et al. (2018).
Comparison of test methods estimating the stiffness of ultrathin coatings.
Journal of Coatings Technology and Research, 15 15(4 4): 743 743-752 752 DOI
van Dijk, N., Wu, D., Persson, C., Isaksson, P. (2018).
Digital Volume Correlation using Quartic FEM Interpolation and Global Optimization.
I 6th European Conference on Computational Mechanics (ECCM 6), 11-15 June, Glasgow, UK .
Vorobyev, A., Garnier, F., van Dijk, N., Hagman, O., Gamstedt, E. (2018).
Evaluation of displacements by means of 3D laser scanning in a mechanically loaded replica of a hull section of the Vasa ship..
Digital Applications in Archaeology and Cultural Heritage, 11 DOI
Wu, D., Isaksson, P., Ferguson, S., Persson, C. (2018).
Young’s modulus of trabecular bone at the tissue level: A review.
Acta Biomaterialia, 78: 1-12 DOI
Wu, Z., Zhang, S., Vorobyev, A., Gamstedt, E., Wu, K. et al. (2018).
Seamless modulus gradient structures for highly resilient, stretchable system integration.
MATERIALS TODAY PHYSICS, . 4 4: 28 28-35 35 DOI
Zoma, F., Toguyeni, D., Coulibaly, O., Hassel, I., Ouedraogo, A. (2018).
Potentials of an Eco-Friendly Composite in Hot-Dry Climate.
Journal of Renewable Materials, . 6(1): 47-54 DOI
Afshar, R., van Dijk, N., Bjurhager, I., Gamstedt, E. (2017).
Comparison of experimental testing and finite element modelling of a replica of a section of the Vasa warship to identify the behaviour of structural joints.
Engineering structures, . 147: 62-76 DOI
Afshar, R., Alavyoon, N., Ahlgren, A., van Dijk, N., Vorobyev, A. et al. (2017).
A full-scale finite-element model of the Vasa ship.
I Proceedings of ECCOMAS Thematic Conference CompWood 2017
Carlsson, J. (2017).
Dynamic crack growth in porous materials.
I LIGHTer international conference, 22 – 23 November 2017, Gothenburg
Carlsson, J., Isaksson, P. (2017).
High-velocity crack speed in wood fibre composites: an experimental and numerical study.
I CFRAC 2017, International Conference on Computational Fracture and Failure of Materials and Structures, Book of abstracts, 155-
Carlsson, J., Joffre, T., Isaksson, P. (2017).
Dynamic crack propagation in wood fibre composites.
I Svenska Mekanikdagar 2017, Uppsala 12 – 13 juni
Espadas-Escalante, J., van Dijk, N., Isaksson, P. (2017).
A study on the influence of boundary conditions in computational homogenization of periodic structures with application to woven composites.
Composite structures, 160: 529-537 DOI
Gamstedt, E., Afshar, R., van Dijk, N., Vorobyev, A. (2017).
Development of a support structure for the wooden shipwreck Vasa.
ECCOMAS Thematic Conference CompWood 2017: Computational Methods in Wood Mechanics, Vienna University of Technology, Austria, 2017 .
Isaksson, P., Carlsson, L. (2017).
Analysis of the out-of-plane compression and shear response of paper-based web-core sandwiches subject to large deformation.
Composite structures, 159: 96-109 DOI
Joffre, T., Isaksson, P., Procter, P., Persson, C. (2017).
Trabecular deformations during screw pull-out: a micro-CT study of lapine bone.
Biomechanics and Modeling in Mechanobiology, . 16(4): 1349-1359 DOI
Joffre, T., Segerholm, K., Persson, C., Bardage, S., Luengo Hendriks, C. et al. (2017).
Characterization of interfacial stress transfer ability in acetylation-treated wood fibre composites using X-ray microtomography.
Industrial crops and products (Print), . 95: 43-49 DOI
Lundberg, B., Huo, J. (2017).
Biconvex versus bilinear force-penetration relationship in percussive drilling of rock.
International Journal of Impact Engineering, 100: 7-12 DOI
Marthin, O., Gamstedt, K. (2017).
On the Hierarchical Structure of Wood and its Mechanisms Providing High Tensile Strength.
I On the Hierarchical Structure of Wood and its Mechanisms Providing High Tensile Strength .
Muzamal, M., Gamstedt, E., Rasmuson, A. (2017).
Mechanistic study of microstructural deformation and stress in steam-exploded softwood.
Wood Science and Technology, . 51(3): 447-462 DOI Download fulltext
Sun, F. (2017).
Mechanical Properties and Deformation Behaviour of Polymer Materials during Nanosectioning: Characterisation and Modelling.
Diss. Download fulltext
Sun, F., Gamstedt, E. (2017).
Determination of mechanical properties by nanocutting.
I Svenska mekanikdagar 2017
Sun, F., Gamstedt, E. (2017).
Fracture behaviour of a glassy polymer during cutting at nanoscale.
I 8th International Conference on Fracture of Polymers, Composites and Adhesives
Sun, F., Li, H., Leifer, K., Gamstedt, E. (2017).
Polymer fracture and deformation during nanosectioning in an ultramicrotome.
Engineering Fracture Mechanics, 182: 595-606 DOI
Sun, F., Li, H., Leifer, K., Gamstedt, E. (2017).
Rate effects on localized shear deformation during nanosectioning of an amorphous thermoplastic polymer.
International Journal of Solids and Structures, 129: 40-48 DOI
Sun, F., Nordli, H., Pukstad, B., Gamstedt, E., Chinga-Carrasco, G. (2017).
Mechanical characteristics of nanocellulose-PEG bionanocomposite wound dressings in wet conditions.
Journal of The Mechanical Behavior of Biomedical Materials, 69: 377-384 DOI
Sun, F., Wiklund, U., Aviles, F., Gamstedt, E. (2017).
Assessing local yield stress and fracture toughness of carbon nanotube poly(methyl methacrylate) composite by nanosectioning.
Composites Science And Technology, 153: 95-102 DOI
Tavares da Costa, M., Bolinsson, J., Fayet, P., Gamstedt, K. (2017).
Mechanical Characterization of Thin Metal Oxide Coatings on Polymer Films by Fragmentation Analysis.
I Svenska mekanikdagar 2017, 74-74
Tavares da Costa, M., Bolinsson, J., Neagu, C., Fayet, P., Wiklund, U. et al. (2017).
Comparison of experimental methods to characterize Young’s modulus of ultrathin coatings on polymer films.
I 13th Coatings Science International - COSI 2017, Noordwijk, The Netherlands on 26 – 30 June
Tummala, G., Joffre, T., Rojas, R., Persson, C., Mihranyan, A. (2017).
Strain-induced stiffening of nanocellulose-reinforced poly(vinyl alcohol) hydrogels mimicking collagenous soft tissues.
Soft Matter, 13(21): 3936-3945 DOI
van Dijk, N., Ahlgren, N., Vorobyev, A., Afshar, R., Gamstedt, E. (2017).
Risk assessment for buckling of the original foremast of the Vasa ship.
I ECCOMAS Thematic Conference CompWood 2017: Computational Methods in Wood Mechanics
Vorobyev, A. (2017).
Static and time-dependent mechanical behaviour of preserved archaeological wood: Case studies of the seventeenth century warship Vasa.
Diss. Download fulltext
Vorobyev, A., Almkvist, G., van Dijk, N., Gamstedt, E. (2017).
Relations of density, polyethylene glycol treatment and moisture content with stiffness properties of Vasa oak samples.
Holtzforschung, 71(4): 327-335 DOI
Vorobyev, A., Garnier, F., van Dijk, N., Afshar, R., Hagman, O. et al. (2017).
Evaluation of displacements of a wooden hull section of the Vasa ship by means of 3D laser scanning.
I Proceedings of ECCOMAS Thematic Conference CompWood 2017: Computational Methods in Wood Mechanics .
Wu, D., Afshar, R., Gamstedt, K. (2017).
Calculation of Joint Stiffness Parameters of the Section Replica of the Vasa Ship.
I ICEMA 2017: 19th International Conference on Experimental Mechanics and Applications, March 26 - 27, 2017, Madrid, Spain
Wu, D., Joffre, T., Gallinetti, S., Öhman Mägi, C., Ferguson, S. et al. (2017).
Elastic Modulus Of Human Single Trabeculae Estimated by Synchrotron CT Experiments And Numerical Models.
I 23rd Congress of the European Society of Biomechanics, Seville, 2-5 July,2017
Wu, D., van Dijk, N., Joffre, T., Öhman-Mägi, C., Stephen, F. et al. (2017).
A combined experimental and numerical method to estimate the elastic modulus of single trabeculae.
Opublicerat manuskript.
Almkvist, G., Norbakhsh, S., Bjurhager, I., Varmuza, K. (2016).
Prediction of tensile strength in iron-contaminated archaeological wood by FT-IR spectroscopy - a study of degradation in recent oak and Vasa oak.
Holzforschung, 70(9): 855-865 DOI
Ascione, L., Caron, J., Godonou, P., van Ijselmuijden, K., Knippers, J. et al. (2016).
Prospect for new guidance in the design of FRP: Support to the implementation, harmonization and further development of the Eurocodes.
Report (JRC Science for Policy Report, 99714) DOI Download fulltext
Berto, F., Afshar, R. (2016).
Inclined Hole Under Different Loading Conditions: A Review of Recent Results.
Strength of Materials, 48(5): 668-676 DOI
Carlsson, J., Isaksson, P. (2016).
Fracture nucleation and continued crack growth on the cell scale in wood analysed by as high-resolution finite element model.
I The Eccomas Congress 2016 Proceedings
Gamstedt, E. (2016).
Moisture induced softening and swelling of natural cellulose fibres in composite applications.
I 37th Riso International Symposium on Materials Science DOI
Garcia-Urquia, E. (2016).
Establishing rainfall frequency contour lines as thresholds for rainfall-induced landslides in Tegucigalpa, Honduras, 1980-2005.
Natural Hazards, 82(3): 2107-2132 DOI
Heldin, M., Isaksson, P., Wiklund, U. (2016).
Initiation of wood defibration in groundwood pulping, single asperity indentation and scratching.
Nordic Pulp & Paper Research Journal, 31(3): 401-406
Joffre, T., Ando, E., Dumont, P., Ferguson, S., Persson, C. et al. (2016).
Deformation field estimation in compressed human trabecular bone using synchrotron X-ray tomography.
I 22nd Congress of the European Society of Biomechanics (ESB), Lyon, France
Joffre, T., Chen, S., Isaksson, P. (2016).
Microscopic strain fields at crack tips in porous materials analyzed by a gradient-enhanced elasticity theory.
Engineering Fracture Mechanics, 168: 160-173 DOI
Joffre, T., Isaksson, P., Dumont, P., Rolland du Roscoat, S., Sticko, S. et al. (2016).
A method to measure moisture induced swelling properties of a single wood cell.
Experimental mechanics, 56: 723-733 DOI
Joffre, T., Isaksson, P., Procter, P., Persson, C. (2016).
Deformations in trabecular bone during pull-out of screw implants.
I European Society of Biomechanics (ESB) 2016, Lyon, France
Joffre, T., Segerholm, K., Persson, C., Luengo Hendriks, C., Bardage, S. et al. (2016).
A combined computational and experimental X-ray CT multiscale study of stable, slowly growing cracks in wood-fibre based composite materials.
I ECCOMAS Congress 2016 (VII European Congress on Computational Methods in Applied Sciences and Engineering
Pan, R., Cheung, O., Wang, Z., Tammela, P., Huo, J. et al. (2016).
Mesoporous Cladophora cellulose separators for lithium-ion batteries.
Journal of Power Sources, 321: 185-192 DOI
Sisodia, S., Garcea, S., George, A., Fullwood, D., Spearing, S. et al. (2016).
High-resolution computed tomography in resin infused woven carbon fibre composites with voids.
Composites Science And Technology, 131: 12-21 DOI
Tavares da Costa, M., Neagu, C., Fayet, P., Wiklund, U., Dickey, E. et al. (2016).
Fragmentation and Adhesion of Thin Metal Oxide Coatings on Polymer Films.
I Stress Evolution in Thin Films and Coatings from Fundamental Understanding to Control Joint ICMCTF-SVC Workshop October 2-5, 2016, Chicago (IL), USA Embassy Suites Hotel, O’Hare-Rosemont, IL .
van Dijk, N. (2016).
Formulation and implementation of stress-driven and/or strain-driven computational homogenization for finite strain.
International Journal for Numerical Methods in Engineering, 107(12): 1009-1028 DOI
van Dijk, N., Gamstedt, E., Bjurhager, I. (2016).
Monitoring archaeological wooden structures: Non-contact measurement systems and interpretation as average strain fields.
Journal of Cultural Heritage, 17: 102-113 DOI
Vorobyev, A., Arnould, O., Laux, D., Longo, R., van Dijk, N. et al. (2016).
Characterisation of cubic oak specimens from the Vasa ship and recent wood by means of quasi-static loading and resonance ultrasound spectroscopy (RUS).
Holzforschung, 70(5): 457-465 DOI
Vorobyev, A., Bjurhager, I., van Dijk, N., Gamstedt, K. (2016).
Effects of barrelling during axial compressive tests of cubic samples with isotropic, transversely isotropic and orthotropic elastic properties.
Composites Science And Technology, 137: 1-8 DOI
Wagner, L., Almkvist, G., Bader, T., Bjurhager, I., Rautkari, L. et al. (2016).
The influence of chemical degradation and polyethylene glycol on moisture-dependent cell wall properties of archeological wooden objects: a case study of the Vasa shipwreck.
Wood Science and Technology, 50(6): 1103-1123 DOI
Wang, Z., Tammela, P., Huo, J., Zhang, P., Strömme, M. et al. (2016).
Solution-processed poly(3,4-ethylenedioxythiophene) nanocomposite paper electrodes for high-capacitance flexible supercapacitors.
Journal of Materials Chemistry A, 4(5): 1714-1722 DOI
Fayet, P., Neagu, R., Gamstedt, K. (2015).
Mechnics-driven design optimized barrier films.
I Proceedings of the AIMCAL Web Coating and Handling Conference, 10-
Garcia-Urquia, E. (2015).
Rainfall-induced Landslide Database for Tegucigalpa, Honduras, 1980-2005.
Report
Garcia-Urquia, E. (2015).
The Use of Press Archives in the Temporal and Spatial Analysis of Rainfall-Induced Landslides in Tegucigalpa, Honduras, 1980-2005.
Diss. Download fulltext
Garcia-Urquia, E., Axelsson, K. (2015).
Rainfall thresholds for the occurrence of urban landslides in Tegucigalpa, Honduras: An application of the critical rainfall intensity.
Geografiska Annaler. Series A, Physical Geography, 97(1): 61-83 DOI
Girlanda, O., Sahlen, F., Joffre, T., Gamstedt, K., Schmidt, L. et al. (2015).
Analysis of the micromechanical deformation in pressboard performed by X-ray microtomography.
I 2015 IEEE Electrical Insulation Conference (EIC), 89-92 DOI
Hernández (Espersson), M. (2015).
High modulus asphalt concrete: a long life asphalt pavement.
Journal of Civil and Environmental Engineering, 5(5)
Huo, J. (2015).
Biomechanical Analysis of Stress and Stiffness of New Load-Bearing Implants.
Diss. Download fulltext
Huo, J., Dérand, P., Rännar, L., Hirsch, J., Gamstedt, E. (2015).
Failure location predictoin by finite element analysis for an additive manufactured mandible implant.
Medical Engineering and Physics, 37(9): 862-869 DOI
Isaksson, P. (2015).
A note on stress fields and crack growth in porous materials subjected to a contact load.
International Journal of Solids and Structures, 64-65: 62-70 DOI
Jeong, S., Chen, S., Huo, J., Gamstedt, E., Liu, J. et al. (2015).
Mechanically Stretchable and Electrically Insulating Thermal Elastomer Composite by Liquid Alloy Droplet Embedment.
Scientific Reports, 5 DOI
Jeong, S., Chen, S., Huo, J., Gravier, L., Gamstedt, E. et al. (2015).
Thermal Elastomer Composites for Soft Transducers.
I Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), 2015 Transducers - 2015 18th International Conference on, Anchorage, June 21-25, 2015, . 1873-1876 DOI
Joffre, T., Girlanda, O., Forsberg, F., Sahlén, F., Sjödahl, M. et al. (2015).
A 3D in-situ investigation of the deformation in compressive loading in the thickness direction of cellulose fiber mats.
Cellulose (London), 22(5): 2993-3001 DOI
Joffre, T., Procter, P., Brown, C., Isaksson, P., Persson, C. (2015).
Mechanical testing in uCT and synchrotron scanners for an increased understanding of the role of bone microstructure on fracture processes and in fracture treatments.
I Medicinteknikdagarna 2015
Josefsson, G. (2015).
Elasticity of Cellulose Nanofibril Materials.
Diss. Download fulltext
Josefsson, G., Ahvenainen, P., Ezekiel Mushic, N., Gamstedt, K. (2015).
Fibril orientation redistribution induced by stretching of cellulose nanofibril hydrogels.
Journal of Applied Physics, 117(21) DOI
Josefsson, G., Chinga-Carrasco, G., Gamstedt, K. (2015).
Elastic models coupling the cellulose nanofibril to the macroscopic film level.
RSC Advances, 5(71): 58091-58099 DOI
Khosravi, S., Nordqvist, P., Khabbaz, F., Öhman, C., Bjurhager, I. et al. (2015).
Wetting and film formation of wheat gluten dispersions applied to wood substrates as particle board adhesives.
European Polymer Journal, 67: 476-482 DOI
Kooshki, M., Shahri, A., Espersson, M. (2015).
Effect of cold rolling on strength of joint bolts.
Walia journal, 31(S1): 119-124
Lundberg, B., Collet, P. (2015).
Optimal wave shape with respect to efficiency in percussive drilling with detachable drill bit.
International Journal of Impact Engineering, 86: 179-187 DOI
Persson, J., Isaksson, P. (2015).
Modeling rapidly growing cracks in planar materials with a view to micro structural effects.
International Journal of Fracture, 192(2): 191-201 DOI
Sisodia, S., Gamstedt, E., Edgren, F., Varna, J. (2015).
Effects of voids on tension fatigue and quasi-static behaviour of carbon-fibre composite laminates.
Journal of composite materials, 49(17): 2137-2148 DOI
Sisodia, S., Mavrogordato, M., George, A., Bull, D., Spearing, S. et al. (2015).
CHARACTERISATION OF VOIDS AND THEIR INFLUENCE ON DAMAGE PROPAGATION IN RESIN INFUSED CARBON FIBRE REINFORCED POLYMERS.
I 20th International Conference on Composite Materials .
Wang, Z., Xu, C., Tammela, P., Huo, J., Strömme, M. et al. (2015).
Flexible freestanding Cladophora nanocellulose paper based Si anodes for lithium-ion batteries.
Journal of Materials Chemistry A, 3(27): 14109-14115 DOI
Åslund, P., Hägglund, R., Carlsson, L., Isaksson, P. (2015).
An analysis of strain localization and formation of face wrinkles in edge-wise loaded corrugated sandwich panels using a continuum damage model.
International Journal of Solids and Structures, 56-57: 248-257 DOI
Aslund, P., Hagglund, R., Carlsson, L., Isaksson, P. (2014).
Modeling of global and local buckling of corrugated board panels loaded in edge-to-edge compression.
Journal of Sandwich Structures and Materials, 16(3): 272-292 DOI
Espersson, M. (2014).
Effect in the high modulus asphalt concrete with the temperature.
Construction and Building Materials, 71: 638-643 DOI
Gamstedt, K., Bommier, F., Madsen, B. (2014).
Estimation of axial stiffness of plant fibres from compaction of non-woven mats.
Measurement science and technology, 25(3): 035601- DOI
Gamstedt, K., Vorobyev, A., van Dijk, N., Bjurhager, I., Hassel, I. (2014).
Multiscale approach from micromechanics up towards creeping wood structures.
I MS046A in Proceedings of the 11th Word Congress on Computational Mechanics (WCCM XI) and the 5th Europen Conference on Computational mechanics (ECCM V)
Garcia-Urquia, E., Axelsson, K. (2014).
The use of press data in the development of a database for rainfall-induced landslides in Tegucigalpa, Honduras, 1980–2005.
Natural Hazards, 73(2): 237-258 DOI
Hassel, B., Trey, S., Leijonmarck, S., Johansson, M. (2014).
A Study on the Morphology, Mechanical, and Electrical Performance of Polyaniline-modified Wood: A Semiconducting Composite Material.
BioResources, 9(3): 5007-5023
Hassel, I., Afshar, R., Vorobyev, A., Bommier, F., Gamstedt, K. (2014).
Towards determination of local and overall displacements of the Vasa ship structure: Effect of its mechanical connections.
I Historic Ships-The Royal Institution of Naval Architects
Heldin, M., Wiklund, U., Isaksson, P. (2014).
Initiation of wood defibration, tribology at the fiber level.
I Nordtrib, Aarhus, Denmark, June 10-13
Hernandez-Perez, A., Hagglund, R., Carlsson, L., Aviles, F. (2014).
Analysis of twist stiffness of single and double-wall corrugated boards.
Composite structures, 110: 7-15 DOI
Huo, J., Hirsch, J., Deránd, P., Rännar, L., Gamstedt, E. (2014).
Finite Element Investigation of the In - Vivo Failure of a Titanium Alloy HumanJaw Implant.
I 10 International Bernd-Spiessl-Symposium
Huo, J., Rojas, R., Bohlin, J., Hilborn, J., Gamstedt, E. (2014).
Parametric elastic analysis of coupled helical coils for tubular implant applications: Experimental characterization and numerical analysis.
Journal of The Mechanical Behavior of Biomedical Materials, 29: 462-469 DOI
Isaksson, P., Dumont, P. (2014).
Approximation of mode I crack-tip displacement fields by a gradient enhanced elasticity theory.
Engineering Fracture Mechanics, 117: 1-11 DOI
Joffre, T. (2014).
Structure and Mechanical Behaviour of Wood-Fibre Composites.
Diss. Download fulltext
Joffre, T., Miettinen, A., Berthold, F., Gamstedt, E. (2014).
X-ray micro-computed tomography investigation of ﬁbre length degradation during the processing steps of short-ﬁbre composites.
Composites Science And Technology, 105: 127-133 DOI
Joffre, T., Miettinen, A., Wernersson, E., Isaksson, P., Gamstedt, E. (2014).
Effects of defects on the tensile strength of short-fibre composite materials.
Mechanics of materials (Print), 75: 125-134 DOI
Joffre, T., Miettinen, A., Wernersson, E., Isaksson, P., Gamstedt, K. (2014).
Effects of defects on the tensile strength of short-fibre composite materials.
Mechanics of materials (Print), 75: 125-134 DOI
Joffre, T., Neagu, R., Bardage, S., Gamstedt, K. (2014).
Modelling of the hygroelastic behaviour of normal and compression wood tracheids.
Journal of Structural Biology, 185(1): 89-98 DOI
Josefsson, G., Berthold, F., Gamstedt, K. (2014).
Stiffness contribution of cellulose nanofibrils to composite materials.
International Journal of Solids and Structures, 51(5): 945-953 DOI
Marais, A., Magnusson, M., Joffre, T., Wernersson, E., Wagberg, L. (2014).
New insights into the mechanisms behind the strengthening of lignocellulosic fibrous networks with polyamines.
Cellulose (London), 21(6): 3941-3950 DOI
Mikczinski, M., Josefsson, G., Chinga-Carrasco, G., Gamstedt, E., Fatikow, S. (2014).
Nanorobotic Testing to Assess the Stiffness Properties of Nanopaper.
IEEE Transactions on robotics, 30(1): 115-119 DOI
Muzamal, M., Gamstedt, E., Rasmuson, A. (2014).
Modeling wood fiber deformation caused by vapor expansion during steam explosion of wood.
Wood Science and Technology, 48(2): 353-372 DOI
Norbakhsh, S., Bjurhager, I., Almkvist, G. (2014).
Impact of iron(II) and oxygen on degradation of oak - modeling of the Vasa wood.
Holzforschung, 68(6): 649-655 DOI
Persson, J., Isaksson, P. (2014).
A mechanical particle model for analyzing rapid deformations and fracture in 3D fiber materials with ability to handle length effects.
International Journal of Solids and Structures, 51(11-12): 2244-2251 DOI
Sellén, C., Isaksson, P. (2014).
A mechanical model for dimensional instability in moisture sensitive networks.
Journal of composite materials, 48(3): 277-289 DOI
Sisodia, s. (2014).
Effects of voids on quasi-static and tension fatigue behaviour of carbon-fibre composite laminates.
Journal of composite materials
van Dijk, N., Langelaar, M., van Keulen, F. (2014).
Element deformation scaling for robust geometrically nonlinear analyses in topology optimization.
Structural and multidisciplinary optimization (Print), 50(4): 537-560 DOI
Vorobyev, A. (2014).
The influence of degradation and PEG impregnation on mechanical properties of archaeological wood from the Vasa warship.
I RIKSANTIKVARIEÄMBETET OCH MARIS VID SÖDERTÖRNS HÖGSKOLA TVÄRVETENSKAPLIGT FORSKARSEMINARIUM
Vorobyev, A., van Dijk, N., Bjurhager, I., Gamstedt, E. (2014).
DETERMINATION OF CONSTITUTIVE MECHANICAL BEHAVIOR OF PRECIOUS SAMPLES FROM LARGE WOODEN STRUCTURES OF CULTURAL HERITAGE.
I 11th World Conference on Computational Mechanics (WCCM XI) 5th European Conference on Computational Mechanics (ECCM V) 6th European Conference on Computational Fluid Dynamics (ECFD VI) Barcelona, 20th-25th July 2014
Vorobyev, A., van Dijk, N., Bjurhager, I., Gamstedt, E. (2014).
Determination of elastic behaviour of precious samples from large wooden structuresof cultural heritage including screening potential in process treatment.
I Final Cost Action FP0904 Conference:"Recent Advances in the Field of TH and THM Wood Treatment"
Wang, Z., Tammela, P., Zhang, P., Huo, J., Ericson, F. et al. (2014).
Freestanding nanocellulose-composite fibre reinforced 3D polypyrrole electrodes for energy storage applications.
Nanoscale, 6(21): 13068-13075 DOI
Bjurhager, I., Gamstedt, K., Keunecke, D., Niemz, P., Berglund, L. (2013).
Mechanical performance of yew (Taxus baccata L.) from a longbow perspective.
Holzforschung, 67(7): 763-770 DOI
Bjurhager, I., Vorobyev, A., van Dijk, N., Gamstedt, E., Ahlgren, A. et al. (2013).
Investigation of time-dependent deformation of wood from the warship Vasa.
12th ICOM-CC Wet Organic Archaeological Materials Conference Istanbul, Turkey: Istanbul University.
Collet, P., Gary, G., Lundberg, B. (2013).
Noise-corrected Estimation of Complex Modulus in Accord With Causality and Thermodynamics: Application to an Impact test.
Journal of applied mechanics, 80(1): 011018- DOI
Gamstedt, E., Joffre, T., Berthold, F. (2013).
Monitoring of fibre length degradation during processing of short-fibre composites by use of X-ray computed tomography.
I Proceedings of the 34th Risø International Symposium on Materials Science Roskilde, Denmark: Technical University of Denmark.
Gamstedt, K., Bader, T., de Borst, K. (2013).
Mixed numerical-experimental methods in wood micromechanics.
Wood Science and Technology, 47(1): 183-202 DOI
Huo, J., Rojas, R., Bohlin, J., Hilborn, J., Gamstedt, E. (2013).
Parametric analysis of stiffness properties of coupled helical coils for implant application.
19th Congress of the European Society of Biomechanics Patras, Greece: European Society of Biomecnanics.
Isaksson, P., Gradin, P., Hellstrom, L. (2013).
A numerical and experimental study regarding the influence of some process parameters on the damage state in wood chips.
Holzforschung, 67(6): 691-696 DOI
Isaksson, P., Hägglund, R. (2013).
Acoustic emission assisted fracture zone analysis of cellulose fibre materials.
Journal of composite materials, 47
Isaksson, P., Hägglund, R. (2013).
Crack-tip fields in gradient enhanced elasticity.
Engineering Fracture Mechanics, 97: 186-192 DOI
Isaksson, P., Hägglund, R. (2013).
Acoustic emission assisted fracture zone analysis of cellulose fibre materials.
Journal of composite materials, 47(22): 2865-2874 DOI
Joffre, T., Miettinen, A., Berthold, F., Kataja, M., Gamstedt, E. (2013).
X-ray micro-computed tomography investigation of agglomeration and fibre length degradation through the processing chain of wood fibre composite.
Proceedings of the IV ECCOMAS Thematic Conference on the Mechanical Response of Composites Portugal: University of Porto.
Joffre, T., Wernersson, E., Miettinen, A., Luengo Hendriks, C., Gamstedt, E. (2013).
Swelling of cellulose fibres in composite materials: Constraint effects of the surrounding matrix.
Composites Science And Technology, 74: 52-59 DOI
Josefsson, G., Berthold, F., Gamstedt, E. (2013).
Estimation of the elastic properties of cellulose nanofibrils from the elastic properties of biobased nanocomposites.
Proceedings of the IV ECCOMAS Thematic Conference on the Mechanical Response of Composites Portugal: University of Porto.
Josefsson, G., Tanem, B., Li, Y., Vullum, P., Gamstedt, E. (2013).
Prediction of elastic properties of nanofibrillated cellulose from micromechanical modeling and nano-structure characterization by transmission electron microscopy.
Cellulose (London), 20(2): 761-770 DOI
Madsen, B., Gamstedt, E. (2013).
Wood vs. plant fibers: Similarities and differences in composite applications.
Advances in Materials Science and Engineering, 2013
Madsen, B., Gamstedt, K. (2013).
Wood versus Plant Fibers: Similarities and Differences in Composite Applications.
Advances in Materials Science and Engineering, 564346- DOI
Norbakhsh, S., Bjurhager, I., Almkvist, G. (2013).
Mimicking of the strength loss in the Vasa: model experiments with iron-impregnated recent oak.
Holzforschung, 67(6): 707-714 DOI
Norlander, H., Valdek, U., Lundberg, B., Söderström, T. (2013).
Parameter estimation from wave propagation tests on a tube perforated by helical slots.
Mechanical systems and signal processing, 40(1): 385-399 DOI
Persson, J., Isaksson, P. (2013).
A particle-based method for mechanical analyses of planar fiber-based materials.
International Journal for Numerical Methods in Engineering, 93(11): 1216-1234 DOI
van Dijk, N., Maute, K., Langelaar, M., van Keulen, F. (2013).
Level-set methods for structural topology optimization: a review.
Structural and multidisciplinary optimization (Print), 48(3): 437-472 DOI
Westerling, L. (2013).
Interaction of Cylindrical Penetrators with Ceramic and Electromagnetic Armour.
Diss. Download fulltext
Westerling, L., Lundberg, B. (2013).
Stresses in a long cylindrical conductor moving axially through a pair of electrode plates under stationary conditions.
Journal of applied mechanics, 80(2): 021013- DOI
Åberg, M. (2013).
Swedish District Heating Sensitivity: Future Heat Demand Change and Electricity Market Dynamics.
Euro Heat & Power, Frankfurt am Main: Euro Heat&Power. 10(3): 21-25
Åberg, M. (2013).
Lägre värmebehov leder till effektivare fjärrvärme.
Energi magasinet, Stockholm: EMTF Förlag AB. 35(3): 8-10
Bjurhager, I., Gamstedt, E. (2012).
Predicting creep rate in archeological wood from theVasa ship – a first appraoch.
Bjurhager, I., Halonen, H., Lindfors, E., Iversen, T., Almkvist, G. et al. (2012).
State of Degradation in Archeological Oak from the 17th Century Vasa Ship: Substantial Strength Loss Correlates with Reduction in (Holo)Cellulose Molecular Weight.
Biomacromolecules, 13(8): 2521-2527 DOI
Duanmu, J., Gamstedt, E., Rosling, A. (2012).
Bulk composites from microfibrillated cellulose-reinforced thermoset starch made from enzymatically degraded allyl glycidyl ether-modified starch.
Journal of composite materials, 46(25): 3201-3209 DOI
Gamstedt, E., Bader, T., Borst, K. (2012).
Mixed numerical-experimental methods in woodmicromechanics.
Hirsch, J., Gamstedt, K., Sörensen, J., Rännar, L., Carlbom, I. (2012).
Virtual planning of reconstructions, production ofindividualized implants and transfer of the plan to the operating room incraniomaxillofacial surgery.
Isaksson, P. (2012).
A simplified probabilistic macroscopic model for estimating microscopic fracture development in idealized planar fiber network materials.
Mathematics and mechanics of solids, 17(4): 364-377 DOI
Isaksson, P., Dumont, P., du Roscoat, S. (2012).
Crack growth in planar elastic fiber materials.
International Journal of Solids and Structures, 49(13): 1900-1907 DOI
Jansson, T., Lundberg, B. (2012).
Dissipation and transmission of stress wave energy ata percussive drill rod joint.
Joffre, T., Isaksson, P., Latil, P., Dumont, P., Gamstedt, K. (2012).
Identification of hygroelastic properties of the woodcell wall from 3D images obtained by X-ray synchrotron microtomography.
Joffre, T., Miettinen, A., Isaksson, P., Wemersson, E., Gamstedt, E. (2012).
Effects of fibre agglomeration on strength of wood-fibre composites.
Josefsson, G., Gamstedt, E., Berthold, F., Chinga-Carrasco, G. (2012).
Bio-based composites of polylactic acid reinforcedwith nanofibrillated cellulose, nanowhisekers and microcrystalline cellulose:Estimation of the elastic properties of the fillers from elastic properties ofthe composites.
Josefsson, G., Gamstedt, E., Tanem, B., Li, Y., Vullum, P. (2012).
Prediction of elastic properties of wood cellulosenanofibrils from ultrastructure using a self-consistent Mori-Tanaka model.
Lidén, E., Mousawi, S., Helte, A., Lundberg, B. (2012).
Deformation and fracture of a long-rod projectile induced by an oblique moving plate: Numerical simulations.
International Journal of Impact Engineering, 40-41: 35-45 DOI
Marais, A., Kochumalayil, J., Nilsson, C., Fogelström, L., Gamstedt, E. (2012).
Toward an alternative compatibilizer for PLA/cellulose composites: Grafting of xyloglucan with PLA.
Carbohydrate Polymers, 89(4): 1038-1043 DOI
Miettinen, A., Luengo Hendriks, C., Chinga-Carrasco, G., Gamstedt, E., Kataja, M. (2012).
A non-destructive X-ray microtomography approach for measuring fibre length in short-fibre composites.
Composites Science And Technology, 72(15): 1901-1908 DOI
Neagu, R., Cuenoud, M., Berthold, F., Bourban, P., Gamstedt, E. et al. (2012).
The potential of wood fibers as reinforcement in cellular biopolymers.
Journal of cellular plastics (Print), 48(1): 71-103 DOI
Nilsson, H., Galland, S., Larsson, P., Gamstedt, E., Iversen, T. (2012).
Compression molded wood pulp biocomposites: a study of hemicellulose influence on cellulose supramolecular structure and material properties.
Cellulose (London), 19(3): 751-760 DOI
Nordgren, N., Sandell, R., Berthold, F., Pettersson, T., Gamstedt, K. (2012).
Characterization of interfacial stress transferability of particulate cellulose composite materials.
Persson, J., Isaksson, P. (2012).
Dynamic fracture of thin 3D random fiber networks using a particle model.
Proceedings of European Congress on Computational Methods in Applied Sciences and Engineering – ECCOMAS Vienna, Austria: Proceedings of European Congress on Computational Methods in Applied Sciences and Engineering – ECCOMAS.
Persson, J., Isaksson, P. (2012).
High rate dynamic fracture of 3D random fiber networks using aparticle model.
van Dijk, N., Gamstedt, K., Bjurhager, I. (2012).
Towards an improved support structure for the Vasa: Averaged creep strain fields of the hull.
I Proceedings of the Annual Workshop of COST Action FP0802: Micro-charakterisation of wood materials and properties, 104-105
Vorobyev, A., Berghult, A., Bjurhager, I., Gamstedt, K. (2012).
An analysis of elastic properties of oak from the Vasawarship and European oak.
Åslund, P., Hägglund, R., Carlsson, L., Isaksson, P. (2012).
Modeling of global and local buckling of corrugatedboard panels loaded in edgewise compression.
Chinga-Carrasco, G., Miettinen, A., Luengo Hendriks, C., Gamstedt, E., Kataja, M. (2011).
Structural Characterisation of Kraft Pulp Fibres and Their Nanofibrillated Materials for Biodegradable Composite Applications.
I Cuppoletti, John (red.) Nanocomposites and Polymers with Analytical Methods, . 243-260 Download fulltext
Duanmu, J., Gamstedt, E., Pranovich, A., Rosling, A. (2011).
Allyloxy-modified starch with low degree of substitution for fiber reinforced thermoset starch composites.
Composites Science And Technology, 71(4): 520-527 DOI
Gamstedt, E., Sandell, R., Berthold, F., Pettersson, T. (2011).
Characterization of interfacial stress transfer ability of particulate cellulose composite materials.
Mechanics of materials (Print), 43(11): 693-704 DOI
Gamstedt, E., Ståhlberg, M., Bjurhager, I., Ahlgren, A., Olofsson, M. (2011).
From creep characterization of Vasa oak towards design strategies of an improved support structure for the ship.
Joffre, T., Gamstedt, K., Passas, R., Dumont, P., Neagu, C. (2011).
Moisture-induced deformation of wood fibres on the tracheid and cell-wall layer.
I Proceedings of the Annual Workshop of COST Action FP0802: Hierarchical Structure and Mechanical Characterization of Wood, 89-90
Josefsson, G., Gamstedt, K., Tanem, B., Li, Y., Vullum, P. (2011).
Prediction of elastic properties of wood cellulose nanofibrils from ultrastructure characterized by transmission electron microscopy.
I Proccedings of the Annual Workshop of COST Action FP0802: Hierarchical Structure and Mechanical Charakterization of Wood, 87-88
Leppanen, K., Bjurhager, I., Peura, M., Kallonen, A., Suuronen, J. et al. (2011).
X-ray scattering and microtomography study on the structural changes of never-dried silver birch, European aspen and hybrid aspen during drying.
Holzforschung, 65(6): 865-873 DOI
Lidén, E., Andersson, O., Lundberg, B. (2011).
Deformation and fracture of a long-rod projectile induced by an oblique moving plate: Experimental test.
International Journal of Impact Engineering, 38(12): 989-1000 DOI
Madsen, B., Gamstedt, E. (2011).
Cellulose fibers and their potential for reinforcement in composites.
Malmberg, F., Lindblad, J., Östlund, C., Almgren, K., Gamstedt, E. (2011).
Measurement of fibre–fibre contact in three-dimensional images of fibrous materials obtained from X-ray synchrotron microtomography.
Nuclear Instruments and Methods in Physics Research Section A, 637(1): 143-148 DOI
Malmberg, F., Lindblad, J., Östlund, C., Almgren, K., Gamstedt, E. (2011).
Measurement of fibre–fibre contact in three-dimensional images of fibrous materials obtained from X-ray synchrotron microtomography.
Nuclear Instruments and Methods in Physics Research Section A, 637(1): 143-148 DOI
Neagu, R., Bertolla, L., Boissard, C., Berthold, F., Bourban, P. et al. (2011).
Novel biodegradable wood fibre/polylactic acid foam sandwich composites.
Trey, S., Gamstedt, E., Mäder, E., Jönsson, S., Johansson, M. (2011).
Glass fiber reinforced high glass transition temperature thiol-ene networks.
Composites. Part A, Applied science and manufacturing, 42(11): 1800-1808 DOI
Wickholm, K., Lorentzon, A., Berthold, F., Vomhoff, H., Gamstedt, K. et al. (2011).
Wood-derived renewable materials.
Partner Update - Inventia Customer Magazine for Partners, 4: 6-7
Yang, T., Long, H., Malkoch, M., Gamstedt, E., Berglund, L. et al. (2011).
Characterization of Well-Defined Poly(ethylene glycol) Hydrogels Prepared by Thiol-ene Chemistry.
Journal of Polymer Science Part A, 49(18): 4044-4054 DOI
Åberg, M., Henning, D. (2011).
Optimisation of a Swedish district heating system with reduced heat demand due to energy efficiency measures inr esidential buildings.
Energy Policy, . 39(12): 7839-7852 DOI
Appelgren, P., Skoglund, M., Lundberg, P., Westerling, L., Larsson, A. et al. (2010).
Experimental Study of Electromagnetic Effects on Solid Copper Jets.
Journal of applied mechanics, 77(1): 011010- DOI
Edqvist, E., Hedlund, E., Lundberg, B. (2010).
Quasi-static and dynamic electromechanical response of piezoelectric multilayer cantilever beams.
Sensors and Actuators A-Physical, Amsterdam: Elsevier. 157(2): 198-209 DOI
Helte, A., Lidén, E. (2010).
The role of Kelvin-Helmholz instabilities on shaped charge jet interaction with reactive armour plates.
Journal of applied mechanics, 77(5): 051805- DOI
Lidén, E. (2010).
Interaction between High-velocity Penetrators and Moving Armour Components.
Diss. Download fulltext
Lundberg, B., Collet, P. (2010).
Optimal wave with respect to efficiency in percussive drilling with integral drill steel.
International Journal of Impact Engineering, 37(8): 901-906 DOI
Mohr, D., Gary, G., Lundberg, B. (2010).
Evaluation of stress-strain curve estimates in dynamic experiments.
International Journal of Impact Engineering, 37(2): 161-169 DOI
Jansson, A., Lundberg, B. (2009).
Piezoelectric generation of extensional waves in an elastic bar by use of a power amplifier with constrained output current.
Journal of Sound and Vibration, 326(1-2): 213-220 DOI
Okrouhlik, M., Ptak, S., Lundberg, B., Valdek, U. (2009).
FE assessment of an experiment employed for analysis of the transient stress energy flux through spiral slots in axially impacted cylindrical tube.
Strojnicky Casopis, 60(4): 181-209
Okrouhlík, M., Pták, S., Valdek, U. (2009).
Self-Assessment of finite element solutions applied to transient phenomena in solid continuum mechanics.
Engineering mechanics, 16(2): 103-121
Renström, R., Lundberg, P., Lundberg, B. (2009).
Self-similar flow of a conical projectile on a flat target surface under conditions of dwell.
International Journal of Impact Engineering, 36(2): 352-362 DOI
Bussac, M., Collet, P., Gary, G., Lundberg, B., Mousavi, S. (2008).
Viscoelastic impact between a cylindrical striker and a long cylindrical bar.
International Journal of Impact Engineering, 35(4): 226-239 DOI
Holmgren, S., Svensson, B., Gradin, P., Lundberg, B. (2008).
An encapsulated split Hopkinson pressure bar for testing of wood at elevated strain rate, temperature, and pressure.
Experimental techniques (Westport, Conn.), 32(5): 44-50 DOI
Jansson, A., Lundberg, B. (2008).
Three-port impedance model of a piezoelectric bar element: Application to generation and damping of extensional waves.
Journal of Sound and Vibration, 315(4-5): 985-1002 DOI
Jansson, A., Lundberg, B. (2008).
Damping of elastic strain waves by means of a piezoelectric bar element feeding an external RL circuit.
Journal of Sound and Vibration, 314(1-2): 70-82 DOI
Mousavi, S., Hillström, L., Lundberg, B. (2008).
Identification of complex shear modulus from measured shear strains on a circular disc subjected to transient torsion at its centre.
Journal of Sound and Vibration, 313(3-5): 567-580 DOI
Rensfelt, A., Mousavi, S., Mossberg, M., Söderström, T. (2008).
Optimal sensor locations for nonparametric identification of viscoelastic materials.
Automatica, 44(1): 28-38 DOI
Holmgren, S. (2007).
Mechanical testing of wood under conditions relevant for mechanical pulping.
lic.-avh.
Jansson, A., Lundberg, B. (2007).
Piezoelectric generation of extensional waves in a viscoelastic bar by use of a linear power amplifier: Theoretical basis.
Journal of Sound and Vibration, 306(1-2): 318-332 DOI
Jansson, A., Valdek, U., Lundberg, B. (2007).
Generation of prescribed strain waves in an elastic bar by use of piezoelectric actuators driven by a linear power amplifier.
Journal of Sound and Vibration, 306(3-5): 751-765 DOI
Karlsson, F., Rohdin, P., Persson, M. (2007).
Measured and predicted energy demand of a low energy building: Important aspects when using building energy simulation.
Building Services Engineering Research & Technology, 28(3): 223-235 DOI
Lidén, E., Andersson, O., Tjernberg, A. (2007).
Influence of side impacting dynamic armour components on long rod projectiles.
I Francisco Gálvez, Vicente Sánchez-Gálvez (red.) International Symposium on Ballistics,23rd International Symposium on Ballistics, Tarragona, Spain, 16-20 April 2007
Mousavi, S. (2007).
Identification of Viscoelastic Materials by Use of Wave Propagation Methods.
Diss. Download fulltext
Nauclér, P., Lundberg, B., Söderström, T. (2007).
A mechanical wave diode: Using feedforward control for one-way transmission of elastic extensional waves.
IEEE Transactions on Control Systems Technology, 15(4): 715-724 DOI
Lidén, E. (2006).
Interaction of long rod projectiles and thin oblique moving plates.
lic.-avh.
Lidén, E., Johansson, B., Lundberg, B. (2006).
Effect of thin oblique moving plates on long rod projectiles: a reverse impact study.
International Journal of Impact Engineering, 32(10): 1696-1720 DOI
Lundberg, B., Okrouhlik, M. (2006).
Efficiency of a percussive rock drilling process with consideration of wave energy radiation into the rock.
Int. J. Impact Engng, 32: 1573-1583
Lundberg, P., Renström, R., Lundberg, B. (2006).
Impact of conical tungsten projectiles on flat silicon carbide targets: Transition from interface defeat to penetration.
International Journal of Impact Engineering, 32(11): 1842-1856 DOI
Mahata, K., Mousavi, S., Söderström, T. (2006).
On the estimation of complex modulus and Poisson's ratio using longitudinal wave experiments.
Mechanical systems and signal processing, 20(8): 2080-2094 DOI
Renström, R. (2006).
Impact of Metallic Projectiles on a Ceramic Target Surface: Transition Between Interface Defeat and Penetration.
Diss. Download fulltext
Runqvist, A., Mousavi, S., Söderström, T. (2006).
Nonparametric identification of complex modulus using a non-equilibrium SHPB procedure.
I Proc. 14th IFAC Symposium on System Identification, . 1318-1323 DOI
Lundberg, P., Lundberg, B. (2005).
Transition between interface defeat and penetration for tungsten projectiles and four silicon carbide materials.
International Journal of Impact Engineering, 31(7): 781-792 DOI
Mahata, K., Mousavi, S., Söderström, T., Valdek, U. (2005).
Using boundary conditions for estimation of complex modulus from flexural wave experiments.
IEEE Transactions on Control Systems Technology, 13(6): 1093-1099
Mousavi, S., Welch, K., Valdek, U., Lundberg, B. (2005).
Non-equilibrium split Hopkinson pressure bar procedure for non-parametric identification of complex modulus.
International Journal of Impact Engineering, 31(9): 1133-1151 DOI
Rehbinder, G. (2005).
Relation Between Non-Steady Supply Pressure and Flux for a Double Packer Conductivity Meter: An Approximate Analytical Solution.
Flow, Turbulence and Combustion, 74(1): 1-20
Rehbinder, G. (2005).
Hydraulic pumping tests in very deep boreholes in rock. Theory of pressure oscillations induced by elasticity and inertia of the test equipment..
Flow, Turbulence and Combustion, 74: 129-144
Welch, K., Mousavi, S., Lundberg, B., Strømme, M. (2005).
Viscoelastic characterization of compacted pharmaceutical excipient materials by analysis of frequency-dependent mechanical relaxation processes.
The European Physical Journal E Soft matter, 18(1): 105-112 DOI
Mahata, K., Söderström, T., Hillström, L. (2004).
Computationally efficient estimation of wave propagation functions from 1-D wave experiments on viscoelastic materials.
Automatica, 40(5): 713-727 DOI
Mousavi, S., Nicolas, D., Lundberg, B. (2004).
Identification of complex moduli and Poisson's ratio from measured strains on an impacted bar..
Journal of Sound and Vibration, 277: 971-989
Mousavi, S., Nicolas, D., Lundberg, B. (2004).
Identification of complex moduli and Poisson’s ratio from measured strains on an impacted bar.
Journal of Sound and Vibration, 277: 971-986
Mousavi, S., Valdek, U., Welch, K., Lundberg, B. (2004).
SHPB technique for identification of complex modulus under condition of non-uniform stress.
I ICTAM04 Abstracts and CD-ROM Proceedings, 446-
Renström, R., Lundberg, P., Lundberg, B. (2004).
Stationary contact between a cylindrical metallic projectile and a flat target surface under conditions of dwell.
International Journal of Impact Engineering, 30(6): 1265-1282 DOI
Hillström, L., Valdek, U., Lundberg, B. (2003).
Estimation of the state vector and identification of the complex modulus of a beam.
Journal of Sound and Vibration, 261: 653-673
Mahata, K., Mousavi, S., Söderström, T., Mossberg, M., Valdek, U. et al. (2003).
On the use of flexural wave propagation experiments for identification of complex modulus.
IEEE Transactions on Control Systems Technology, 11(6): 863-874
Mousavi, S., Lundberg, B. (2003).
Identification of complex moduli and Poisson's ratio from measured strains on an impacted bar.
I 5thEuromech Solid Mechanics Conference ESMC-5, 424-
Gunnars, J., Wiklund, U. (2002).
Determination of growth-induced strain and thermoelastic properties of coatings by curvature measurements.
Materials Science and Engineering A, 336(1-2): 7-21 DOI
Lundberg, B., Okrouhlik, M. (2002).
Approximate transmission-equivalence of elastic bar transitions under 3D conditions.
Journal of Sound and Vibration, 256(5): 941-954
Nilsson, M. (2002).
Mechanics of an Electrorheological Fluid.
lic.-avh.
Noresson, V., Ohlson, N., Nilsson, M. (2002).
Design of Electrorheological Dampers by Means of Finite Element Analysis: Theory and Applications.
Materials and Design, 23: 361-369
Hillström, L., Lundberg, B. (2001).
Analysis of elastic flexural waves in non-uniform beams from measurement of strains or accelerations.
Journal of Sound and Vibration, 247(2): 227-242
Lundberg, B., Okrouhlik, M. (2001).
Influence of 3D effects on the efficiency of percussive rock drilling.
Int. J. Impact Engng, 25: 345-360
Lundberg, P. (2001).
Interface Defeat and Penetration: Interaction between Metallic Projectiles and Ceramic Targets.
lic.-avh.
Noresson, V., Ohlson, N. (2001).
A critical study of the Bingham model in squeeze-flow mode.
Materials and Design, 22: 651-658
Nygren, T., Lundberg, B., Andersson, L. (2001).
Optimisation of viscoelastic junctions with regard to transmission of wave energy.
Journal of Sound and Vibration, 240(3): 467-481
Ravasoo, A., Lundberg, B. (2001).
Nonlinear interaction of longitudinal waves in an inhomogeneously predeformed elastic medium.
Wave Motion, 34(2): 225-237
Westerling, L. (2001).
Penetration of Tungsten Long Rod Projectiles into Ceramic targets at and above Ordnance Velocities.
lic.-avh.
Westerling, L., Lundberg, P., Lundberg, B. (2001).
Tungsten long-rod penetration into confined cylinders of boron carbide at and above ordnance velocities.
International Journal of Impact Engineering, 25(7): 703-714 DOI
Widehammar, S., Gradin, P., Lundberg, B. (2001).
Approximate determination of phase velocities and displacement fields associated with elastic waves in bars: method based on matrix formulation of Hamilton’s principle.
Journal of Sound and Vibration, 246(5): 853-876
Hillstrom, L., Mossberg, M., Lundberg, B. (2000).
Identification of complex modulus from measured strains on an axially impacted bar using least squares.
JOURNAL OF SOUND AND VIBRATION, 230(3): 689-707
Lundberg, P., Renström, R., Lundberg, B. (2000).
Impact of metallic projectiles on ceramic targets: transition between interface defeat and penetration.
International Journal of Impact Engineering, 24(3): 259-275 DOI
Nilsson, M., Ohlson, N. (2000).
An Electrorheological Fluid in Squeeze Mode.
Journal of Intelligent Material Systems and Structures, 11(7): 545-554
Nilsson, M., Ohlson, N. (2000).
Mechanical and Electrical Properties of an Electrorheological Fluid.
Journal of Intelligent Material Systems and Structures, 11(7): 555-556
Nygren, T., Andersson, L., Lundberg, B. (1999).
Synthesis of elastic junctions with wave transmission properties of a given junction.
WAVE MOTION, 30(2): 143-158
Nygren, T., Andersson, L., Lundberg, B. (1999).
Optimization of elastic junctions with regard to transmission of wave energy.
WAVE MOTION, 29(3): 223-244
Ravasoo, A. (1999).
Nonlinear longitudinal waves in inhomogeneously predeformed media.
Journal of the Acoustical Society of America, 106(6): 3143-3149
Wiklund, U., Gunnars, J., Hogmark, S. (1999).
Influence of residual stresses on fracture and delamination of thin hard coatings.
Wear, . 232(2): 262-269 DOI
Nilsson, M., Ohlson, N. (1998).
Vibration control by means of electro-rheological fluids.
Ekevad, M., Lundberg, B. (1997).
Influence of pole length and stiffness on the energy conversion in pole-vaulting.
JOURNAL OF BIOMECHANICS, 30(3): 259-264
Nygren, T., Lundberg, B., Andersson, L. (1997).
Dissipation of wave energy in a viscoelastic junction between elastic bars: Dependence on transmission direction.
Journal of Sound and Vibration, 199: 323-336
Westerling, L., Lundberg, P., Holmberg, L., Lundberg, B. (1997).
High velocity penetration of homogeneous, segmented and telescopic projectiles into alumina targets.
Int. J. Impact Engng, 20: 817-827
Beccu, R., Wu, C., Lundberg, B. (1996).
Reflection and transmission of the energy of transient elastic extensional waves in a bent bar.
JOURNAL OF SOUND AND VIBRATION, 191(2): 261-272
Berzi, P., Beccu, R., Lundberg, B. (1996).
Identification of a percussive drill rod joint from its response to stress wave loading.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 18(3): 281-290
Itskovits, M. (1996).
Generalization of the Achenbach-Chao model for waves in non-linear hereditary media.
INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 31(2): 203-210
Lundberg, P., Westerling, L., Lundberg, B. (1996).
Influence of scale on the penetration of tungsten rods into steel-backed alumina targets.
International Journal of Impact Engineering, 18(4): 403-416 DOI
Nygren, T., Andersson, L., Lundberg, B. (1996).
Optimum transmission of waves through a non-uniform viscoelastic junction between elastic bars.
Eur. J. Mech., A/Solids, 15(1): 29-49
Wu, C., Lundberg, B. (1996).
Reflection and transmission of the energy of harmonic elastic waves in a bent bar.
JOURNAL OF SOUND AND VIBRATION, 190(4): 645-659
Andersson, P. (1995).
On Dynamic Dislocations at Crack Growth.
lic.-avh.
Axen, N., Lundberg, B. (1995).
Abrasive wear in intermediate mode of multiphase materials.
TRIBOLOGY INTERNATIONAL, 28(8): 523-529
Ekevad, M. (1995).
On the Mechanics of Pole Vaulting.
lic.-avh.
EKEVAD, M., LUNDBERG, B. (1995).
SIMULATION OF SMART POLE VAULTING.
JOURNAL OF BIOMECHANICS, 28(9): 1079-1090
Gunnars, J. (1995).
On Cracks in Layered Materials.
lic.-avh.
Nygren, T. (1995).
On Transmission, Reflection and Dissipation of Extensional Wave Energy at a Non-uniform Viscoelastic Junction between Elastic Bars.
lic.-avh.
Wu, C., Lundberg, B. (1995).
Efficiency of percussive drilling of rock with a bent drill rod.
Int. J. Impact Engng, 15: 735-747
Lundberg, B. (1993).
Computer Modelling and Simulation of Percussive Drilling of Rock.
Lundberg, B., Ödeen, S. (1993).
In situ determination of the complex modulus from strain measurements on an impacted structure.
Journal of Sound and Vibration, 167: 413-419
Ödeen, S., Lundberg, B. (1993).
Determination of complex modulus from measured end-point accelerations of an impacted specimen.
Journal of Sound and Vibration, 165: 1-8
Bermejo, D., Kadekar, S., Tavares da Costa, M., Podiyan, O., Gamstedt, E. et al.
First Aldol-Crosslinked Hyaluronic Acid Hydrogel: Fast and Hydrolytically Stable Gel with Tissue Adhesive Properties.
Chemical Sciences Journal Submitted.
Carlsson, J., Heldin, M., Isaksson, P., Wiklund, U.
Investigating tool engagement in groundwood pulping – finite element modelling and in-situ observations at the microscale.
Submitted.
Garcia-Urquia, E.
Establishing Rainfall Frequency Contour Lines as thresholds for rainfall-induced landslides in Tegucigalpa, Honduras.
Natural Hazards Submitted.
Garcia-Urquia, E., Yamagishi, H.
Comparison of landslide susceptibility maps derived from press-based and aerial photograph interpretation inventories for Tegucigalpa, Honduras.
Opublicerat manuskript.
Gerth, J., Isaksson, P., Hollman, P., Hogmark, S., Wiklund, U.
Assessing the hardness and residual stress at the very edge of a TiAlN coated cutting insert.
Surface and coatings technology . Submitted.
Hedlund, M., Kamf, T., Gamstedt, K.
Fast Optimization Methodology for Press-fitted Composite Hollow Cylinder Flywheel Energy Storage.
Composite structures Submitted.
Huc, S.
Numerical analysis of moisture-induced strains and stresses in glued-laminated timber.
Submitted.
Huo, J., Gamstedt, E.
Applicability of a two-stage analytical model of the stiffness of mesh tubes.
Opublicerat manuskript.
Huo, J., Hirsch, J., Gamstedt, E.
An analytical study of stress distributions around screws in mandibular bone.
Opublicerat manuskript.
Huo, J., van Dijk, N., Gamstedt, E.
Elastic analyses of periodic rhombic mesh structures.
Opublicerat manuskript.
Josefsson, G., Chinga-Carrasco, G., Gamstedt, E.
Thickness variability of cellulose nanofibril films: Measurement and implications for mechanical characterization.
Submitted.
Sun, F., Li, H., Leifer, K., Gamstedt, E.
Rate effects on localized shear deformation during nanosectioning of an amorphous thermoplastic polymer.
Submitted.
Vorobyev, A., Garnier, F., van Dijk, N., Hagman, O., Gamstedt, E.
Evaluation of displacements by means of 3D laser scanning in a mechanically loaded replica of a hull section of the Vasa ship.
Submitted.
Vorobyev, A., van Dijk, N., Gamstedt, E.
Orthotropic creep in polyethylene glycol impregnated archaeological oak from the Vasa ship: Results of creep experiments in a museum-like climate.
Submitted.
Wu, D., Isaksson, P., Persson, C.
Quantification of strains and cracks in trabecular bone by digital volume correlation: A case study.
Opublicerat manuskript.
Wu, D., Pujari-Palmer, M., Bojan, A., Palmquist, A., Procter, P. et al.
The effect of augmentation materials on screw pullout resistance from human trabecular bone.
Opublicerat manuskript.