Publikationer

  • Artikel i tidskrift

    Fowler, Lee; Janson, Oscar; Engqvist, Håkan; Norgren, Susanne et al.

    Antibacterial investigation of titanium-copper alloys using luminescent Staphylococcus epidermidis in a direct contact test

    Ingår i Materials science & engineering. C, biomimetic materials, sensors and systems, s. 707-714, 2019.

  • Konferensbidrag

    Heinrichs, Jannica; Norgren, Susanne; Jacobson, Staffan; Olsson, Mikael

    Cemented carbide wear initiation in sliding contact with iron ore

    Ingår i Proceedings of 2nd Sweden-China Symposium on Tribology, 2019.

  • Artikel i tidskrift

    Toller-Nordström, Lisa; Mingard, K.; Norgren, Susanne

    Deformation induced martensite in a Fe-Ni-Co binder phase of a hardmetal

    Ingår i Materials Characterization, 2019.

  • Doktorsavhandling, sammanläggning

    Heldin, Magnus

    Designing grinding tools to control and understand fibre release in groundwood pulping

    Open access
  • Artikel i tidskrift

    Haglöf, F.; Kaplan, B.; Norgren, Susanne; Blomqvist, A. et al.

    Experimental study of carbides in the Ti-Cr-C system

    Ingår i Journal of Materials Science, s. 12358-12370, 2019.

    Open access
  • Konferensbidrag

    Heinrichs, Jannica; Norgren, Susanne; Jacobson, Staffan; Olsson, Mikael

    Influence of cemented carbide binder type on wear initiation in rock drilling – investigated in sliding wear against magnetite rock

    Ingår i Proceedings of International Conference on the Science of Hard Materials, Khao Lak, Thailand, 2019.

  • Artikel i tidskrift

    Heinrichs, Jannica; Norgren, Susanne; Jacobson, Staffan; Yvell, Karin et al.

    Influence of cemented carbide binder type on wear initiation in rock drilling – investigated in sliding wear against magnetite rock

    Ingår i International journal of refractory metals & hard materials, 2019.

  • Artikel i tidskrift

    Olander, Petra; Heinrichs, Jannica

    Initiation and propagation of tool wear in turning of titanium alloys - Evaluated in successive sliding wear test

    Ingår i Wear, s. 1658-1666, 2019.

  • Konferensbidrag

    Olander, Petra; Heinrichs, Jannica

    Initiation and propagation of tool wear in turning of titanium alloys – evaluated in successive sliding wear test

    Ingår i Proceedings of Wear of Materials Conference, Miami, Florida, USA, 2019.

  • Konferensbidrag

    Hiroko, Mikado; Heinrichs, Jannica; Wiklund, Urban; Kawamura, Shingo et al.

    Initiation wear of cemented carbide tools used in copper processing - evaluated in sliding contact

    Ingår i Proceedings of International Conference on the Science of Hard Materials, Khao Lak, Thailand, 2019.

  • Konferensbidrag

    Heldin, Magnus; Carlsson, Jenny; Isaksson, Per; Wiklund, Urban

    On tool engagement in groundwood pulping - in-situ observations and numerical modelling at the microscale

    Ingår i The 11th Fundamental Mechanical Pulp Research Seminar, Norrköping, Sweden, April 2-4, 2019.

  • Artikel i tidskrift

    Hassila, Carl Johan; Harlin, P.; Wiklund, Urban

    Rolling contact fatigue crack propagation relative to anisotropies in additive manufactured Inconel 625

    Ingår i Wear, s. 1837-1845, 2019.

    Open access
  • Artikel i tidskrift

    Holmberg, Anders; Andersson, Michael; Kassman Rudolphi, Åsa

    Rolling fatigue life of PM steel with different porosity and surface finish

    Ingår i Wear, s. 454-461, 2019.

    Open access
  • Konferensbidrag

    Wiklund, Urban; Emy, Guttenkunst; Grandin, Martina; Toller, Lisa

    Wear mechanisms of tools for exploration drilling

    Ingår i Euromat 2019, Stockholm, Sweden, s. 787-, 2019.

  • Artikel i tidskrift

    Heinrichs, Jannica; Mikado, H.; Kawakami, A.; Wiklund, Urban et al.

    Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire in zipper production

    Ingår i Wear, s. 96-107, 2019.

  • Artikel i tidskrift

    Larsson, Elin; Olander, Petra; Jacobson, Staffan

    Boric acid as fuel additive - Friction experiments and reflections around its effect on fuel saving

    Ingår i Tribology International, s. 302-312, 2018.

  • Artikel i tidskrift

    Tavares da Costa, Marcus Vinicius; Neagu, Cristian; Fayet, Pierre; Wiklund, Urban et al.

    Comparison of test methods estimating the stiffness of ultrathin coatings

    Ingår i Journal of Coatings Technology and Research, s. 743 743-752 752, 2018.

    Open access
  • Artikel i tidskrift

    Ajaxon, Ingrid; Holmberg, Anders; Öhman, Caroline; Persson, Cecilia

    Fatigue performance of a high-strength, degradable calcium phosphate bone cement

    Ingår i Journal of The Mechanical Behavior of Biomedical Materials, s. 46-52, 2018.

    Open access
  • Artikel i tidskrift

    Roizard, X.; Heinrichs, Jannica; Buteri, A.; Jacobson, Staffan et al.

    Friction behavior of ferritic stainless steel in a strongly diluted alcohol solution of alkylphosphonic acid

    Ingår i Tribology International, s. 465-473, 2018.

  • Artikel i tidskrift

    Meingast, Arno; Coronel, Ernesto; Blomqvist, Andreas; Norgren, Susanne et al.

    High resolution STEM investigation of interface layers in cemented carbides

    Ingår i INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, s. 135 135-140 140, 2018.

  • Artikel i tidskrift

    Grandin, Martina; Wiklund, Urban

    Influence of mechanical and electrical load on a copper/copper-graphite sliding electrical contact

    Ingår i Tribology International, s. 1-9, 2018.

  • Konferensbidrag

    Heldin, Magnus; Wiklund, Urban

    Influences of grinding surface alignment in groundwood pulping of Norway spruce

    Ingår i 18th Nordic Symposium on Tribology - NORDTRIB 2018, Uppsala, Sweden, June 18-21, 2018.

  • Artikel i tidskrift

    Heinrichs, Jannica; Olsson, Mikael; Almqvist, Bjarne; Jacobson, Staffan

    Initial surface failure and wear of cemented carbides in sliding contact with different rock types

    Ingår i Wear, s. 43-55, 2018.

  • Artikel i tidskrift

    Heinrichs, Jannica; Olsson, Mikael; Yvell, Karin; Jacobson, Staffan

    On the deformation mechanisms of cemented carbide in rock drilling: Fundamental studies involving sliding contact against a rock crystal tip

    Ingår i International journal of refractory metals & hard materials, s. 141-151, 2018.

  • Konferensbidrag

    Elo, Robin; Jacobson, Staffan

    On the dramatic wear protecting effect of tribofilms on wear of combustion engine valves

    2018.

  • Artikel i tidskrift

    Westlund, Viktoria; Heinrichs, Jannica; Jacobson, Staffan

    On the Role of Material Transfer in Friction Between Metals: Initial Phenomena and Effects of Roughness and Boundary Lubrication in Sliding Between Aluminium and Tool Steels

    Ingår i Tribology letters, 2018.

    Open access
  • Konferensbidrag

    Sjögren, Lena; Hammam, Tag; Kassman Rudolphi, Åsa

    Pitfalls in environmental endurance testing of electrical connectors – problem overview and discussion

    2018.

  • Konferensbidrag

    Sjögren, Lena; Hammam, Tag; Kassman Rudolphi, Åsa

    Pitfalls in Environmental Endurance Testing of Electrical Connectors-Problem Overview and Discussion

    Ingår i Proceedings of 2018 29th International Conference on Electrical Contacts and 64th IEEE Holm Conference on Electrical Contacts, s. 475-482, 2018.

  • Doktorsavhandling, sammanläggning

    Elo, Robin

    Protective Tribofilms on Combustion Engine Valves

    Open access
  • Artikel i tidskrift

    Kaplan, B.; Odelros, S.; Kritikos, M.; Bejjani, R. et al.

    Study of tool wear and chemical interaction during machining of Ti6Al4V

    Ingår i INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, s. 253 253-256 256, 2018.

  • Artikel i tidskrift

    Elo, Robin; Heinrichs, Jannica; Jacobson, Staffan

    Surface texturing to promote formation of protective tribofilms on combustion engine valves

    Ingår i Proceedings of the Institution of mechanical engineers. Part J, journal of engineering tribology, s. 54-61, 2018.

  • Konferensbidrag

    Larsson, Elin; Olander, Petra; Jacobson, Staffan

    Tribofilm formation of a boric acid fuel additive – Investigation of tribofilm properties

    2018.

  • Konferensbidrag

    Heinrichs, Jannica; Kawakami, Ayumi; Mikado, Hiroko; Wiklund, Urban et al.

    Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire

    2018.

  • Artikel i tidskrift

    Grandin, Martina; Wiklund, Urban

    Wear phenomena and tribofilm formation of copper/copper-graphite sliding electrical contact materials

    Ingår i Wear, s. 227-235, 2018.

  • Licentiatavhandling, sammanläggning

    Toller, Lisa

    Alternative binder hardmetals for steel turning

    Open access
  • Artikel i tidskrift

    Sun, Fengzhen; Wiklund, Urban; Aviles, F.; Gamstedt, E. Kristofer

    Assessing local yield stress and fracture toughness of carbon nanotube poly(methyl methacrylate) composite by nanosectioning

    Ingår i Composites Science And Technology, s. 95-102, 2017.

  • Artikel i tidskrift

    Goel, S.; Bjorklund, S.; Curry, N.; Wiklund, Urban et al.

    Axial suspension plasma spraying of Al2O3 coatings for superior tribological properties

    Ingår i Surface & Coatings Technology, s. 80-87, 2017.

  • Artikel i tidskrift

    Larsson, Elin; Olander, Petra; Jacobson, Staffan

    Boric acid as a lubricating fuel additive - Simplified lab experiments to understand fuel consumption reduction in field test

    Ingår i Wear, s. 822-830, 2017.

  • Konferensbidrag

    Larsson, Elin; Olander, Petra; Jacobson, Staffan

    Boric acid as a lubricating fuel additive - Simplified lab experiments to understand fuel consumption reduction in field test

    2017.

  • Konferensbidrag

    Larsson, Elin; Olander, Petra; Jacobson, Staffan

    Boric acid as a lubricating fuel additive: Optimization of a lab test to understand fuel consumption reduction in field tests

    s. 1-1 2017.

    Open access
  • Konferensbidrag

    Tavares da Costa, Marcus Vinicius; Bolinsson, Jessica; Neagu, Cristian; Fayet, Pierre et al.

    Comparison of experimental methods to characterize Young’s modulus of ultrathin coatings on polymer films

    2017.

  • Artikel i tidskrift

    Aiso, Toshiharu; Wiklund, Urban; Kubota, Manabu; Jacobson, Staffan

    Effect of combined additions of Si, Mn, Cr and Al to carbon steel on material transfer in a steel/TiN coated tool sliding contact

    Ingår i Wear, s. 9-17, 2017.

  • Artikel i tidskrift

    Jones, H. G.; Norgren, Susanne; Kritikos, M.; Mingard, K. P. et al.

    Examination of wear damage to rock-mining hardmetal drill bits

    Ingår i International journal of refractory metals & hard materials, s. 1-10, 2017.

  • Artikel i tidskrift

    Odelros, S.; Kaplan, B.; Kritikos, M.; Johansson, Malin et al.

    Experimental and theoretical study of the microscopic crater wear mechanism in titanium machining

    Ingår i Wear, s. 115-124, 2017.

  • Konferensbidrag

    Kryniski, Krystof; Kassman Rudolphi, Åsa; Zhao, Su; Lindholm, Per

    Experimental evaluation of contact stiffness and damping to sustain transients and resonances

    2017.

  • Konferensbidrag

    Lind, Jonna; Kassman Rudolphi, Åsa

    Fretting behavior of PP grease lubricated PPS and PA composites

    2017.

  • Konferensbidrag

    Lindholm, Per; Kryniski, Krystof; Zhao, Su; Kassman Rudolphi, Åsa

    Friction dissipation under tangential high freequency excitation

    2017.

  • Artikel i tidskrift

    Larsson, Elin; Andersson, Anna M.; Kassman Rudolphi, Åsa

    Grease lubricated fretting of silver coated copper electrical contacts

    Ingår i Wear, s. 634-642, 2017.

  • Konferensbidrag

    Larsson, Elin; Andersson, Anna M; Kassman Rudolpi, Åsa

    Grease lubricated fretting of silver coated copper electrical contacts

    2017.

  • Artikel i tidskrift

    Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

    Initial deformation and wear of cemented carbides in rock drilling as examined by a sliding wear test

    Ingår i INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, s. 7-13, 2017.

  • Artikel i tidskrift

    Toller, Lisa; Liu, Chunxin; Holmström, Erik; Larsson, Tommy et al.

    Investigation of Cemented Carbides with Alternative Binders after CVD Coating

    Ingår i International journal of refractory metals & hard materials, s. 225-229, 2017.

  • Artikel i tidskrift

    Toller, Lisa; Jacobson, Staffan; Norgren, Susanne

    Life time of cemented carbide inserts with Ni-Fe binder in steel turning

    Ingår i Wear, s. 1822-1829, 2017.

  • Konferensbidrag

    Toller, Lisa; Jacobson, Staffan; Norgren, Susanne

    Life time of cemented carbide inserts with Ni-Fe binder in steel turning

    2017.

  • Konferensbidrag

    Toller, Lisa; Norgren, Susanne

    Mechanisms of plastic deformation in WC-Co and WC-Ni-Fe turning inserts

    2017.

  • Artikel i tidskrift

    Olsson, Mikael; Yvell, K.; Heinrichs, Jannica; Bengtsson, M. et al.

    Surface degradation mechanisms of cemented carbide drill buttons in iron ore rock drilling

    Ingår i Wear, s. 81-92, 2017.

  • Konferensbidrag

    Heldin, Magnus; Wiklund, Urban

    Tailored grinding surfaces for groundwood pulping - influencing wear mechanisms and energy requirements

    Ingår i 21st International Conference on Wear of Materials, Long Beach, March 26-30, 2017.

  • Licentiatavhandling, sammanläggning

    Lind, Jonna

    Tribology of polymer composites for elevated temperature applications

    Open access
  • Artikel i tidskrift

    Elo, Robin; Heinrichs, Jannica; Jacobson, Staffan

    Wear protective capacity of tribofilms formed on combustion engine valves with different surface textures

    Ingår i Wear, s. 1429-1436, 2017.

  • Konferensbidrag

    Kassman Rudolphi, Åsa; Edling, Erika; Zhao, Su; Öberg, Åke

    A test method for mapping the contact force limit of polymer materials in sliding contact

    2016.

  • Konferensbidrag

    Larsson, Elin; Olander, Petra; Jacobson, Staffan

    Boric acid as a lubricating fuel additive: Adaption of a labtest technique to mimic piston/cylinder conditions

    2016.

    Open access
  • Konferensbidrag

    Larsson, Elin; Olander, Petra; Jacobson, Staffan

    Boric acid as a lubricating fuel additive: Lab experiments to understand fuel savings in field test

    2016.

    Open access
  • Artikel i tidskrift

    Mao, Fang; Taher, Mamoun; Kryshtal, Oleksandr; Kruk, Adam et al.

    Combinatorial Study of Gradient Ag-Al Thin Films: Microstructure, Phase Formation, Mechanical and Electrical Properties

    Ingår i ACS Applied Materials and Interfaces, s. 30635-30643, 2016.

    Open access
  • Konferensbidrag

    Lind, Jonna; Kassman Rudolphi, Åsa

    Cross section microscopy studies of wear tested polymer composites

    2016.

  • Konferensbidrag

    Lind, Jonna; Kassman Rudolphi, Åsa

    Cross sections studies of polymer composites

    2016.

  • Artikel i tidskrift

    Podgornik, B.; Paulin, I.; Zajec, B.; Jacobson, Staffan et al.

    Deep cryogenic treatment of tool steels

    Ingår i Journal of Materials Processing Technology, s. 398-406, 2016.

  • Artikel i tidskrift

    Gustavsson, Fredrik; Jacobson, Staffan

    Diverse mechanisms of friction induced self-organisation into a low-friction material - An overview of WS2 tribofilm formation

    Ingår i Tribology International, s. 340-347, 2016.

  • Artikel i tidskrift

    Aiso, Toshiharu; Wiklund, Urban; Kubota, Manabu; Jacobson, Staffan

    Effect of Si and Al additions to carbon steel on material transfer and coating damage mechanism in turning with CVD coated tools

    Ingår i Wear, s. 379-389, 2016.

  • Artikel i tidskrift

    Aiso, Toshiharu; Wiklund, Urban; Kubota, Manabu; Jacobson, Staffan

    Effect of Si and Cr additions to carbon steel on material transfer in a steel/TiN coated tool sliding contact

    Ingår i Tribology International, s. 337-348, 2016.

  • Konferensbidrag

    Edling, Erika; Kassman Rudolphi, Åsa; Andersson, Anna; Zhao, Su et al.

    Evaluation of dry friction solutions for industrial applications

    2016.

  • Konferensbidrag

    Tavares da Costa, Marcus Vinicius; Neagu, Cristian; Fayet, Pierre; Wiklund, Urban et al.

    Fragmentation and Adhesion of Thin Metal Oxide Coatings on Polymer Films

    2016.

    Open access
  • Artikel i tidskrift

    Aiso, Toshiharu; Wiklund, Urban

    Influence of contact parameters on material transfer from steel to TiN coated tool – optimisation of a sliding test for simulation of material transfer in milling

    Ingår i Tribology - Materials, Surfaces & Interfaces, s. 107-116, 2016.

  • Artikel i tidskrift

    Aiso, Toshiharu; Wiklund, Urban; Kubota, Manabu; Jacobson, Staffan

    Influence of Mn and Al additions to carbon steel on material transfer and coating damage mechanism in a sliding contact between steel and TiN coated HSS tool

    Ingår i Tribology International, s. 414-424, 2016.

  • Konferensbidrag

    Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

    Initial wear of cemented carbides in sliding contact with different rock types

    2016.

  • Artikel i tidskrift

    Heldin, Magnus; Isaksson, Per; Wiklund, Urban

    Initiation of wood defibration in groundwood pulping, single asperity indentation and scratching

    Ingår i Nordic Pulp & Paper Research Journal, s. 401-406, 2016.

    Open access
  • Artikel i tidskrift

    Roizard, X.; Heinrichs, Jannica; Taouil, A. Et; Jacobson, Staffan et al.

    Insights into sliding wear and friction behavior of copper in ethanol containing alkylphosphonic acid molecules

    Ingår i Tribology International, s. 141-148, 2016.

  • Artikel i tidskrift

    Westlund, Viktoria; Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

    Investigation of material transfer in sliding friction-topography or surface chemistry?

    Ingår i Tribology International, s. 213-223, 2016.

    Open access
  • Konferensbidrag

    Heldin, Magnus; Wiklund, Urban

    Micrometre compressions to facilitate controlled wear in groundwood pulping

    Ingår i 17th Nordic Symposium on Tribology - Nordtrib, Hämeenlinna, Finland, 14-17 June, 2016.

  • Konferensbidrag

    Westlund, Viktoria; Jacobson, Staffan

    Nitro carburized steels for high stress tribological components – influence on seizure limits from steel grade and surface treatment parameters

    2016.

  • Konferensbidrag

    Öberg, Åke; Johansson, Erik; Arnell, Sylva; Kassman Rudolphi, Åsa

    On the self-healing of silver contacts

    Ingår i Proceedings - 28th International Conference on Electric Contacts, s. 265-270, 2016.

    Open access
  • Konferensbidrag

    Toller, Lisa; Norgren, Susanne

    Phase transformations in iron-based alternative binders for hardmetals

    2016.

  • Artikel i tidskrift

    Nyberg, Harald; Hogmark, Sture; Jacobson, Staffan

    Reply to a Comment on "Calculated Trajectories of Curling Stones under Assymetrical Friction: Validation of Published Models"

    Ingår i Tribology letters, 2016.

  • Konferensbidrag

    Toller, Lisa; Jacobson, Staffan; Norgren, Susanne

    Steel turning with nickel-iron bound hard metal tools – a study on microstructure in plastically deformed inserts

    2016.

  • Konferensbidrag

    Elo, Robin; Heinrichs, Jannica; Jacobson, Staffan

    Surface texturing to promote formation of protective tribofilms on combustion engine valves

    2016.

  • Konferensbidrag

    Ajaxon, Ingrid; Holmberg, Anders; Öhman Mägi, Caroline; Persson, Cecilia

    The influence of porosity on the fatigue properties of brushite cement

    Ingår i Biomaterials for tissue engineering models, 2016.

  • Artikel i tidskrift

    Grandin, Martina; Wiklund, Urban

    Wear and electrical performance of a slip-ring system with silver-graphite in continuous sliding against PVD coated wires

    Ingår i Wear, s. 138-147, 2016.

  • Artikel i tidskrift

    Gustavsson, Fredrik; Bugnet, Matthieu; Polcar, Tomas; Cavaleiro, Albano et al.

    A High-Resolution TEM/EELS Study of the Effect of Doping Elements on the Sliding Mechanisms of Sputtered WS2 Coatings

    Ingår i Tribology Transactions, s. 113-118, 2015.

  • Konferensbidrag

    Heldin, Magnus; Wiklund, Urban

    A labscale test equipment ot study the tool surface influence in pressure groundwood pulping

    Ingår i 20th International Conference on Wear of Materials, Toronto, Canada, April 12-16, 2015.

  • Artikel i tidskrift

    Stenlund, Patrik; Omar, Omar; Brohede, Ulrika; Norgren, Susanne et al.

    Bone response to a novel Ti–Ta–Nb–Zr alloy

    Ingår i Acta Biomaterialia, s. 165-175, 2015.

  • Artikel i tidskrift

    Stenlund, Patrik; Omar, Omar; Brohede, Ulrika; Norgren, Susanne et al.

    Bone response to a novel Ti-Ta-Nb-Zr alloy

    Ingår i Acta Biomaterialia, s. 165-175, 2015.

  • Artikel i tidskrift

    Weidow, Jonathan; Blomqvist, Andreas; Salomonsson, Johanna; Norgren, Susanne

    Cemented carbides based on WC pre-alloyed with Cr or Ta

    Ingår i INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, s. 36-41, 2015.

  • Konferensbidrag

    Yung, Der-Liang; Antonov, Maksim; Hussainova, Irina; Veinthal, Renno et al.

    Composition And Structure Of Bimodal WC-Co Materials Related To Mechanical Properties And Abrasive Wear

    Ingår i M2D2015, s. 655-664, 2015.

  • Konferensbidrag

    Toller, Lisa; Larsson, Tommy; Jacobson, Staffan; Norgren, Susanne

    CVD Coating Adhesion on Metal Cutting Insertswith Alternative Binders

    2015.

  • Konferensbidrag

    Heldin, Magnus; Wiklund, Urban

    Designed tools for controlling the defibration mechanisms in the pressure groundwood process

    Ingår i International Tribology Conference, Tokyo 2015, Tokyo, Japan, September 16-20, 2015.

  • Konferensbidrag

    Lind, Jonna; Kassman Rudolphi, Åsa

    Effect of temperature on the performance of some polymer composites

    2015.

    Open access
  • Artikel i tidskrift

    Elo, Robin; Jacobson, Staffan

    Formation and breakdown of oil residue tribofilms protecting the valves of diesel engines

    Ingår i Wear, s. 193-198, 2015.

  • Konferensbidrag

    Lind, Jonna; Kassman Rudolphi, Åsa

    Friction and wear of PA66-PPA composites sliding against anodized aluminium cylinders

    2015.

  • Artikel i tidskrift

    Lind, Jonna; Kassman Rudolphi, Åsa; Lindholm, Per O; Qin, Jian

    Friction and wear studies of some PEEK materials

    Ingår i Tribologia - Finnish Journal of Tribology, s. 20-28, 2015.

  • Konferensbidrag

    Jacobson, Staffan

    Friction in curling –Fundamentals and applications of friction on ice illustrated by the Olympic winter sport: Keynote Talk

    2015.

  • Artikel i tidskrift

    Mao, Fang; Wiklund, Urban; Andersson, Anna M.; Jansson, Ulf

    Graphene as a lubricant on Ag for electrical contact applications

    Ingår i Journal of Materials Science, s. 6518-6525, 2015.

    Open access
  • Artikel i tidskrift

    Podgornik, Bojan; Sedlaček, M.; Čekada, M.; Jacobson, Staffan et al.

    Impact of fracture toughness on surface properties of PVD coated cold work tool steel

    Ingår i Surface & Coatings Technology, s. 144-150, 2015.

  • Konferensbidrag

    Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

    Initial deformation and wear of cemented carbides for rock drilling as evaluated by a sliding wear test

    2015.

  • Artikel i tidskrift

    Olsson, Mikael; Heinrichs, Jannica; Yvell, Karin; Jacobson, Staffan

    Initial degradation of cemented carbides for rock drilling - Model studies of the tribological contact against rock

    Ingår i International journal of refractory metals & hard materials, s. 104-113, 2015.

  • Konferensbidrag

    Toller, Lisa; Liu, Chunxin; Holmström, Erik; Larsson, Tommy et al.

    Investigation of Cemented Carbides with Alternative Binders after CVD Coating

    2015.

  • Konferensbidrag

    Westlund, Viktoria; Heinrichs, Jannica; Jacobson, Staffan

    INVESTIGATION OF MATERIAL TRANSFER IN SLIDING FRICTION-TOPOGRAPHY OR SURFACE CHEMISTRY?

    2015.

  • Konferensbidrag

    Jacobson, Staffan

    Material transfer – an underrated phenomenon in friction

    2015.

  • Konferensbidrag

    Olander, Petra; Johnsson, Elin; Jacobson, Staffan

    Mechanisms behind the promising tribological performance of a boric acid based lubricant additive

    Ingår i Proceedings of the 42th Leeds-Lyon Symposium on Tribology, 2015.

  • Konferensbidrag

    Olander, Petra; Jacobson, Staffan

    Scuffing resistance testing of piston ring materials for marine two-stroke diesel engines and mapping of the operating mechanisms

    2015.

  • Artikel i tidskrift

    Olander, Petra; Jacobson, Staffan

    Scuffing resistance testing of piston ring materials for marine two-stroke diesel engines and mapping of the operating mechanisms

    Ingår i Wear, s. 42-48, 2015.

    Open access
  • Konferensbidrag

    Heinrichs, Jannica; Olsson, Mikael; Yvell, Karin; Jacobson, Staffan

    Soft rock scratches hard cemented carbide

    2015.

  • Artikel i tidskrift

    Heinrichs, Jannica; Olsson, Mikael; Staffan, Jacobson

    Surface degradation of cemented carbides in scratching contact with granite and diamond: the roles of microstructure and composition

    Ingår i Wear, s. 210-221, 2015.

  • Artikel i tidskrift

    Olander, Petra; Eskildsen, Svend S.; Fogh, Jesper W.; Hollman, Patrik et al.

    Testing scuffing resistance of materials for marine 2-stroke engines: Difficulties with lab scale testing of a complex phenomenon

    Ingår i Wear, s. 9-18, 2015.

    Open access
  • Artikel i tidskrift

    Anmark, Niclas; Bjork, Thomas; Ganea, Anna; Olund, Patrik et al.

    The effect of inclusion composition on tool wear in hard part turning using PCBN cutting tools

    Ingår i Wear, s. 13-22, 2015.

    Open access
  • Artikel i tidskrift

    Kaplan, Bartek; Blomqvist, Andreas; Selleby, Malin; Norgren, Susanne

    Thermodynamic analysis of the W-Co-Cr system supported by ab initio calculations and verified with quaternary data

    Ingår i Calphad, s. 59-67, 2015.

  • Artikel i tidskrift

    Kaplan, Bartek; Norgren, Susanne; Schwind, Martin; Selleby, Malin

    Thermodynamic calculations and experimental verification in the WC-Co-Cr cemented carbide system

    Ingår i INT J REFRACT MET H, s. 257-262, 2015.

  • Artikel i tidskrift

    Kaplan, Bartek; Norgren, Susanne; Schwind, Martin; Selleby, Malin

    Thermodynamic calculations and experimental verification in the WC-Co-Cr cemented carbide system (Reprint of Int. Journal of Refractory Metals and Hard Materials vol 48, pg 257-262, 2015)

    Ingår i INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, s. 400-405, 2015.

  • Artikel i tidskrift

    Grandin, Martina; Nedfors, Nils; Sundberg, Jill; Jansson, Ulf et al.

    Ti-Ni-C nanocomposite coatings evaluated in a sliding electrical contact application

    Ingår i Surface & Coatings Technology, s. 210-218, 2015.

  • Konferensbidrag

    Nyberg, Harald; Grandin, Martina; Wiklund, Urban; Jacobson, Staffan

    A method for tribological evaluation of gradient surfaces

    2014.

  • Konferensbidrag

    Grandin, Martina; Wiklund, Urban

    A wear tolerant slip-ring assembly, individual spring-wire brushes in a v-grooved metal-graphite ring

    Ingår i Proceedings of the 27th International Conference on Electrical Contacts, s. 237-243, 2014.

  • Artikel i tidskrift

    Gerth, Julia; Gustavsson, Fredrik; Collin, Marianne; Gunilla, Andersson et al.

    Adhesion phenomena in the secondary shear zone in turning of austenitic stainless steel and carbon steel

    Ingår i Journal of Materials Processing Technology, s. 1467-1481, 2014.

  • Artikel i tidskrift

    Riddar, Frida; Kassman Rudolphi, Åsa

    Comparison of friction performance of four anodised aluminium surfaces for use in a clutch actuator

    Ingår i Wear, s. 227-233, 2014.

  • Konferensbidrag

    Heinrichs, Jannica; Gustavsson, Fredrik; Olsson, Mikael; Jacobson, Staffan

    Deformation-activated work material transfer to DLC coatings

    2014.

  • Konferensbidrag

    Holmgren Lind, Jonna; Kassman Rudolphi, Åsa

    Effect of PTFE on the tribological behaviour of PPS with glass fiber

    Ingår i 1st International conference on polymer tribology (PolyTrib), 2014.

  • Artikel i tidskrift

    Kaplan, Bartek; Markstrom, Andreas; Norgren, Susanne; Selleby, Malin

    Experimental Determination of the Solubility of Co in the Cr-Based Carbides Cr23C6, Cr7C3, and Cr3C2

    Ingår i Metallurgical and Materials Transactions. A, s. 4820-4828, 2014.

  • Konferensbidrag

    Elo, Robin; Jacobson, Staffan

    Formation and degradation of protective tribofilms on diesel engine valve surfaces

    2014.

  • Konferensbidrag

    Holmgren, Jonna; Kassman Rudolphi, Åsa

    Friction and wear studies of some PEEK materials

    Ingår i 16th Nordic Symposium on Tribology (NORDTRIB), 2014.

  • Artikel i tidskrift

    Nygren, Kristian; Samuelsson, Mattias; Flink, Axel; Ljungcrantz, Henrik et al.

    Growth and characterization of chromium carbide films deposited by high rate reactive magnetron sputtering for electrical contact applications

    Ingår i Surface & Coatings Technology, s. 326-334, 2014.

    Open access
  • Artikel i tidskrift

    Sundberg, Jill; Nyberg, Harald; Särhammar, Erik; Nyberg, Tomas et al.

    Influence of composition, structure and testing atmosphere on the tribological performance of W-S-N coatings

    Ingår i Surface & Coatings Technology, s. 86-94, 2014.

    Open access
  • Konferensbidrag

    Heinrichs, Jannica; Yvell, Karin; Olsson, Mikael; Jacobson, Staffan

    Influence of hardness and microstructure on the mechanisms of deformation and wear of cemented carbides for rock drilling

    2014.

  • Konferensbidrag

    Heldin, Magnus; Wiklund, Urban; Isaksson, Per

    Initiation of wood defibration, tribology at the fiber level

    Ingår i Nordtrib, Aarhus, Denmark, June 10-13, 2014.

  • Konferensbidrag

    Jacobson, Staffan

    Low-friction Sliding Without Lubrication– Five Working Material Concepts and Tribological Challenges

    2014.

  • Bok

    Torbacke, Marika; Kassman Rudolphi, Åsa; Kassfeldt, Elisabet

    Lubricants: Introduction to properties and performance

    John Wiley & Sons, 2014.

  • Artikel i tidskrift

    Särhammar, Erik; Strandberg, Erik; Sundberg, Jill; Nyberg, Harald et al.

    Mechanisms for compositional variations of coatings sputtered from a WS2 target

    Ingår i Surface & Coatings Technology, s. 186-190, 2014.

  • Artikel i tidskrift

    Borgh, Ida; Hedstrom, Peter; Persson, Tomas; Norgren, Susanne et al.

    Microstructure, grain size distribution and grain shape in WC-Co alloys sintered at different carbon activities

    Ingår i International Journal of Refractory Metals and Hard Materials, s. 205-211, 2014.

  • Artikel i tidskrift

    Heinrichs, Jannica; Jenei, Istvan Zoltan; Jacobson, Staffan

    Morphology and composition of tribofilms deposited using a tribochemical burnishing technique

    Ingår i Tribology - Materials, Surfaces & Interfaces, s. 14-20, 2014.

  • Konferensbidrag

    Olsson, Mikael; Heinrichs, Jannica; Yvell, Karin; Jacobson, Staffan

    On the relevance of hardness as a material parameter in the deformation and wear of cemented carbides in rock drilling

    2014.

  • Konferensbidrag

    Eskildsen, Svend; Fogh, Jesper; Andersson, Henrik; Olander, Petra et al.

    On the sulphuric acid corrosion in large 2-stroke marine diesel engines

    Ingår i Tribocorrosion 2014,  9-11 April 2014, University of Strathclyde, Glasgow, 2014.

  • Artikel i tidskrift

    Forsberg, Peter; Debord, Dominique; Jacobson, Staffan

    Quantification of Combustion Valve Sealing Interface Sliding - A Novel Experimental Technique and Simulations

    Ingår i Tribology International, s. 150-155, 2014.

  • Konferensbidrag

    Heldin, Magnus; Wiklund, Urban

    Scratch testing for mimicking the early stage of wood defibration

    Ingår i Asiatrib, Agra, India, February 17-20, 2014.

  • Konferensbidrag

    Olander, Petra; Eskildsen S., Svend; Fogh W., Jesper; Hollman, P. et al.

    Testing scuffing resistance of materials for marine 2-stroke engines: Difficulties with lab scale testing of a complex phenomenon

    Ingår i Proceedings of 16th Nordic Symposium on Tribology, 2014.

  • Artikel i tidskrift

    Riddar, Frida; Kassman Rudolphi, Åsa

    The effect of lubrication on the friction performance in pneumatic clutch actuators

    Ingår i Wear, s. 166-173, 2014.

  • Artikel i tidskrift

    Forsberg, Peter; Elo, Robin; Jacobson, Staffan

    The importance of oil and particle flow for exhaust valve wear - An experimental study

    Ingår i Tribology International, s. 176-183, 2014.

  • Artikel i tidskrift

    Kaplan, Bartek; Markstrom, Andreas; Blomqvist, Andreas; Norgren, Susanne et al.

    Thermodynamic analysis of the Co-Cr-C system

    Ingår i Calphad, s. 226-236, 2014.

  • Artikel i tidskrift

    Heinrichs, Jannica; Olsson, Mikael; Jenei, Istvan Zoltan; Jacobson, Staffan

    Transfer of titanium in sliding contacts: New discoveries and insights revealed by in situ studies in the SEM

    Ingår i Wear, s. 87-94, 2014.

  • Artikel i tidskrift

    Nyberg, Harald; Sundberg, Jill; Särhammar, Erik; Nyberg, Tomas et al.

    Tribochemical formation of sulphide tribofilms from a Ti-C-S coating sliding against different counter surfaces

    Ingår i Tribology letters, s. 563-572, 2014.

  • Artikel i tidskrift

    Tkachenko, Serhii; Datskevich, Oleg; Kulak, Leonid; Jacobson, Staffan et al.

    Wear and friction properties of experimental Ti-Si-Zr alloys for biomedical applications

    Ingår i Journal of The Mechanical Behavior of Biomedical Materials, s. 61-72, 2014.

  • Konferensbidrag

    Elo, Robin; Jacobson, Staffan

    Wear mechanism differences of intake valves within heavy duty combustion engines

    2014.

  • Konferensbidrag

    Elo, Robin; Jacobson, Staffan

    Wear mechanism study of intake valve system in modern heavy duty combustion engines

    2014.

  • Konferensbidrag

    Gustavsson, Fredrik; Bugnet, Matthieu; Polcar, Tomas; Cavaleiro, Albano et al.

    A High-Resolution TEM/EELS Study of the Effect of Doping Elements on the Sliding Mechanisms of Sputtered WS2 Coatings

    2013.

  • Artikel i tidskrift

    Arhammar, C.; Silvearv, F.; Bergman, Anders; Norgren, Susanne et al.

    A theoretical study of possible point defects incorporated into alpha-alumina deposited by chemical vapor deposition

    Ingår i Theoretical Chemistry accounts, s. 1433-, 2013.

  • Konferensbidrag

    Gustavsson, Fredrik; Jacobson, Staffan

    All roads lead to Rome: On the numerous routes to low-friction WS2 tribofilms

    2013.

  • Artikel i tidskrift

    Nyberg, Harald; Hogmark, Sture; Jacobson, Staffan

    Calculated Trajectories of Curling Stones Sliding Under Asymmetrical Friction: Validation of Published Models

    Ingår i Tribology letters, s. 379-385, 2013.

  • Konferensbidrag

    Forsberg, Peter; Gustavsson, Fredrik; Hollman, Patrik; Jacobson, Staffan

    Comparison and analysis of protective tribofilms found on heavy duty exhaust valves from field service and made in test rig

    2013.

  • Artikel i tidskrift

    Forsberg, Peter; Gustavsson, Fredrik; Hollman, Patrik; Jacobson, Staffan

    Comparison and analysis of protective tribofilms found on heavy duty exhaust valves from field service and made in test rig

    Ingår i Wear, s. 1351-1359, 2013.

  • Artikel i tidskrift

    Nyberg, Harald; Tokoroyama, Takayuki; Wiklund, Urban; Jacobson, Staffan

    Design of low-friction PVD coating systems with enhanced running-in performance - carbon overcoats on TaC/aC coatings

    Ingår i Surface & Coatings Technology, s. 48-54, 2013.

    Open access
  • Konferensbidrag

    Nyberg, Harald; Sundberg, Jill; Särhammar, Erik; Gustavsson, Fredrik et al.

    Extreme friction reductions during inital running-in of W-S-C-Ti low-friction coatings

    Ingår i 19th International Conference on Wear of Materials 2013; 14-18 April 2013; Portland, OR, USA, 2013.

  • Artikel i tidskrift

    Nyberg, Harald; Sundberg, Jill; Särhammar, Erik; Gustavsson, Fredrik et al.

    Extreme friction reductions during inital running-in of W-S-C-Ti low-friction coatings

    Ingår i Wear, s. 987-997, 2013.

  • Artikel i tidskrift

    Riddar, Frida; Kassman Rudolphi, Åsa

    Friction, wear and surface damage mechanisms of pneumatic clutch actuators

    Ingår i Wear, s. 36-44, 2013.

  • Artikel i tidskrift

    Grandin, Martina; Wiklund, Urban

    Friction, wear and tribofilm formation on electrical contact materials in reciprocating sliding against silver-graphite

    Ingår i Wear, s. 1481-1491, 2013.

  • Konferensbidrag

    Grandin, Martina; Wiklund, Urban

    Friction, wear and tribofilm formation on electrical contact materials in reciprocating sliding against silver-graphite

    2013.

  • Artikel i tidskrift

    Gustavsson, Fredrik; Jacobson, Staffan; Cavaleiro, Albano; Polcar, Tomas

    Frictional behavior of self-adaptive nanostructural Mo-Se-C coatings in different sliding conditions

    Ingår i Wear, s. 286-296, 2013.

  • Artikel i tidskrift

    Heinrichs, Jannica; Gerth, Julia; Thersleff, Thomas; Bexell, Ulf et al.

    Influence of sliding speed on modes of material transfer as steel slides against PVD tool coatings

    Ingår i Tribology International, s. 55-64, 2013.

  • Artikel i tidskrift

    Sundberg, Jill; Nyberg, Harald; Särhammar, Erik; Gustavsson, Fredrik et al.

    Influence of Ti addition on the structure and properties of low-friction W–S–C coatings

    Ingår i Surface & Coatings Technology, s. 340-348, 2013.

  • Konferensbidrag

    Heinrichs, Jannica; Olsson, Mikael; Staffan, Jacobson

    Influence of tool steel microstructure on initial material transfer in metal forming – In situ studies in the SEM

    2013.

  • Artikel i tidskrift

    Heinrichs, Jannica; Olsson, M.; Jacobson, Staffan

    Influence of tool steel microstructure on initial material transfer in metal forming-In situ studies in the SEM

    Ingår i Wear, s. 1249-1256, 2013.

  • Artikel i tidskrift

    Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

    Initiation of Galling in Metal Forming: Differences Between Aluminium and Austenitic Stainless Steel Studied In Situ in the SEM

    Ingår i Tribology letters, s. 431-438, 2013.

  • Artikel i tidskrift

    Pettersson, Maria; Tkachenko, S.; Schmidt, S.; Berlind, T. et al.

    Mechanical and tribological behavior of silicon nitride and silicon carbon nitride coatings for total joint replacements

    Ingår i Journal of The Mechanical Behavior of Biomedical Materials, s. 41-47, 2013.

  • Konferensbidrag

    Heinrichs, Jannica; Jenei, Istvan Zoltan; Jacobson, Staffan

    Morphology and composition of tribofilms deposited using a tribochemical burnishing technique

    2013.

  • Artikel i tidskrift

    Gustavsson, Fredrik; Svahn, Fredrik; Bexell, Ulf; Jacobson, Staffan

    Nanoparticle based and sputtered WS2 low-friction coatings - Differences and similarities with respect to friction mechanisms and tribofilm formation

    Ingår i Surface & Coatings Technology, s. 616-626, 2013.

  • Konferensbidrag

    Jacobson, Staffan; Heinrichs, Jannica; Olsson, Mikael

    New experimental findings on the role of initial material transfer in determining friction and surface damage

    2013.

  • Artikel i tidskrift

    Angserud, Jenny; From, Anna; Wallin, Johan; Jacobson, Staffan et al.

    On a wear test for rock drill inserts

    Ingår i Wear, s. 109-115, 2013.

  • Konferensbidrag

    Angserud, Jenny; From, Anna; Wallin, Johan; Jacobson, Staffan et al.

    On a wear test for rock drill inserts

    2013.

  • Artikel i tidskrift

    Norgren, Susanne; Kusoffsky, Alexandra

    On the solubility of chromium in the cubic carbide and M7C3 carbide in the WC-Co-Cr-Me systems (Me = Ti, Nb, Ta and Zr)

    Ingår i INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, s. 24-26, 2013.

  • Artikel i tidskrift

    Forsberg, Peter; Gustavsson, Fredrik; Renman, Viktor; Hieke, André et al.

    Performance of DLC coatings in heated commercial engine oil

    Ingår i Wear, s. 211-222, 2013.

  • Konferensbidrag

    Olander, Petra; Hollman, Patrik; Jacobson, Staffan

    Piston ring and cylinder liner wear aggravation caused by transition to greener ship transports: Comparison of samples from test rig and field

    2013.

  • Artikel i tidskrift

    Olander, Petra; Hollman, Patrik; Jacobson, Staffan

    Piston ring and cylinder liner wear aggravation caused by transition to greener ship transports: Comparison of samples from test rig and field

    Ingår i Wear, s. 1345-1350, 2013.

  • Artikel i tidskrift

    Sundberg, Jill; Mao, Fang; Andersson, Anna M.; Wiklund, Urban et al.

    Solution-based synthesis of AgI coatings for low-friction applications

    Ingår i Journal of Materials Science, s. 2236-2244, 2013.

  • Artikel i tidskrift

    Pettersson, Maria; Berlind, Torun; Schmidt, Susann; Jacobson, Staffan et al.

    Structure and composition of silicon nitride and silicon carbon nitridecoatings for joint replacements

    Ingår i Surface & Coatings Technology, s. 827-834, 2013.

  • Artikel i tidskrift

    Nyberg, Harald; Alfredsson, Sara; Hogmark, Sture; Jacobson, Staffan

    The asymmetrical friction mechanism that puts the curl in the curling stone

    Ingår i Wear, s. 583-589, 2013.

  • Konferensbidrag

    Nyberg, Harald; Alfredsson, Sara; Hogmark, Sture; Jacobson, Staffan

    The asymmetrical friction mechanism that puts the curl in the curling stone

    2013.

  • Artikel i tidskrift

    Nyberg, Harald; Alfredsson, Sara; Hogmark, Sture; Jacobson, Staffan

    The asymmetrical friction mechanism that puts the curl in the curling stone

    Ingår i Wear, s. 583-589, 2013.

  • Konferensbidrag

    Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

    Transfer of titanium in sliding contacts - New discoveries and insights revealed by in situ studies in the SEM

    2013.

  • Konferensbidrag

    Sundberg, Jill; Nyberg, Harald; Särhammar, Erik; Nyberg, Tomas et al.

    Tribochemically active Ti-C-S coatings

    2013.

  • Artikel i tidskrift

    Sundberg, Jill; Nyberg, Harald; Särhammar, Erik; Kádas, Krisztina et al.

    Tribochemically Active Ti–C–S Nanocomposite Coatings

    Ingår i Materials Research Letters, s. 148-155, 2013.

    Open access
  • Konferensbidrag

    Sundberg, Jill; Nyberg, Harald; Särhammar, Erik; Kádas, Krisztina et al.

    Tribochemically active Ti-C-S nanocomposites – a new concept for self-lubricating coatings

    2013.

  • Konferensbidrag

    Jacobson, Staffan

    Tribology is just another word for extreme conditions: Invited Keynote

    2013.

  • Artikel i tidskrift

    Gustavsson, Fredrik; Jacobson, Staffan; Cavaleiro, Albano; Polcar, Tomas

    Ultra-low friction of W-S-N solid lubricant coating

    Ingår i Surface & Coatings Technology, s. 541-548, 2013.

  • Konferensbidrag

    Andersson, Gunnar; Öberg, Åke; Grandin, Martina; Kassman Rudolphi, Åsa

    Understanding field experience of contact performance from lab fretting tests of model contacts

    Ingår i Proc. IEEE 59th HOLM Conference on Electrical Contacts, s. 207-214, 2013.

  • Konferensbidrag

    Pettersson, Maria; Thersleff, Thomas; Jacobson, Staffan; Larsson, Sune et al.

    Wear zones on retrieved metal femoral heads from metal-on-polymer hip prostheses

    2013.

  • Konferensbidrag

    Gerth, Julia; Collin, Marianne; Andersson, Gunilla; Nordh, Lars-Göran et al.

    Adhesion phenomena in the secondary shear zone in turning of austenitic stainless steel and carbon steel

    2012.

  • Konferensbidrag

    Gerth, Julia; Wiklund, Urban

    Adhesion properties in the secondary shear zone in turning of austenitic stainless steel and carbon steel

    2012.

  • Konferensbidrag

    Zhmud, Boris; Åkerlund, Eva-Brita; Jacobson, Staffan; Hardell, Jens et al.

    ANS Triboconditioning: In-Manufacture Running-in Process for Improving Tribological Properties of Mechanical Parts made of Steel and Cast Iron

    Ingår i 18th International Colloquium Tribology – Industrial and Automotive Lubrication, Ostfildern, Germany, 2012.

  • Konferensbidrag

    Nyberg, Harald; Hogmark, Sture; Jacobson, Staffan

    Calculated trajectories of curling stones sliding under asymmetrical friction

    Ingår i Nordtrib 2012, 15th Nordic Symposium on Tribology, 2012.

  • Kapitel i bok, del av antologi

    Jacobson, Staffan

    Coatings and surface treatments: interaction with lubricants

    Ingår i The Handbook of Lubrication and Tribology, s. 41-1-41-13, 2012.

  • Artikel i tidskrift

    Riddar, Frida; Hogmark, Sture; Kassman Rudolphi, Åsa

    Comparison of anodised aluminium surfaces from four fabrication methods

    Ingår i Journal of Materials Processing Technology, s. 2272-2281, 2012.

  • Artikel i tidskrift

    Polcar, Tomas; Gustavsson, Fredrik; Thersleff, Thomas; Jacobson, Staffan et al.

    Complex frictional analysis of self-lubricant W-S-C/Cr coating

    Ingår i Faraday discussions (Online), s. 383-401, 2012.

  • Konferensbidrag

    Nyberg, Harald; Tokoroyama, Takayuki; Wiklund, Urban; Jacobson, Staffan

    Design of low-friction PVD coating systems with enhanced running-in performance - carbon overcoats on TaC/aC coatings

    Ingår i Nordtrib 2012, 15th Nordic Symposium on Tribology, 2012.

  • Artikel i tidskrift

    Gerth, Julia; Heinrichs, Jannica; Nyberg, Harald; Larsson, Mats et al.

    Evaluation of an intermittent sliding test for reproducing work material transfer in milling operations

    Ingår i Tribology International, s. 153-160, 2012.

  • Artikel i tidskrift

    Olofsson, Johanna; Grehk, T. Mikael; Berlind, Torun; Persson, Cecilia et al.

    Evaluation of silicon nitride as a wear resistant and resorbable alternative for total joint replacement

    Ingår i Biomatter, s. 94 94-102 102, 2012.

  • Artikel i tidskrift

    Heinrichs, Jannica; Jacobson, Staffan

    Evaluation of TiB2 coatings in cold forming of aluminium

    Ingår i Surface Engineering, s. 517-525, 2012.

  • Artikel i tidskrift

    Olofsson, Johanna; Pettersson, Maria; Teuscher, Nico; Heilmann, Andreas et al.

    Fabrication and evaluation of SixNy coatings for total joint replacements

    Ingår i Journal of materials science. Materials in medicine, s. 1879-1889, 2012.

  • Artikel i tidskrift

    Gustavsson, Fredrik; Forsberg, Peter; Renman, Viktor; Jacobson, Staffan

    Formation of tribologically beneficial layer on counter surface with smart chemical design of DLC coating in fuel contact

    Ingår i Tribology - Materials, Surfaces & Interfaces, s. 102-108, 2012.

  • Artikel i tidskrift

    Gustavsson, Fredrik; Forsberg, Peter; Jacobson, Staffan

    Friction and wear behaviour of low-friction coatings in conventional and alternative fuels

    Ingår i Tribology International, s. 22-28, 2012.

  • Konferensbidrag

    Forsberg, Peter; Hollman, Patrik; Jacobson, Staffan

    Heavy duty exhaust valve simulation and evaluation in a test rig

    Ingår i Nordtrib, Trondheim, 2012, 2012.

  • Konferensbidrag

    Gustavsson, Fredrik; Forsberg, Peter; Renman, Viktor; Hieke, André et al.

    How tribological propertiesof DLC coatings vary in different engine oils at elevated temperature

    Ingår i Nordtrib, Trondheim, Norge, 2012.

  • Artikel i tidskrift

    Heinrichs, Jannica; Gerth, Julia; Bexell, Ulf; Larsson, Mats et al.

    Influence from surface roughness on steel transfer to PVD tool coatings in continuous and intermittent sliding contacts

    Ingår i Tribology International, s. 9-18, 2012.

  • Konferensbidrag

    Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

    Initiation of galling in forming of ductile metals: – differences between aluminium and austenitic stainless steel studied in situ in the SEM

    Ingår i Nordtrib, Trondheim, Norway, 2012, 2012.

  • Konferensbidrag

    Pettersson, Maria; Tkachenko, Sergey; Schmidt, Susann; Jacobson, Staffan et al.

    Mechanical properties of SixNy- and SixCyNz-coatings for total joint replacements

    Ingår i 15th Nordic Symposium on Tribology, NordTrib, Trondheim, Norway, June 12-15, 2012., 2012.

  • Artikel i tidskrift

    Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

    Mechanisms of material transfer studied in situ in the SEM: Explanations to the success of DLC coated tools in aluminium forming

    Ingår i Wear, s. 49-60, 2012.

  • Artikel i tidskrift

    Heinrichs, Jannica; Jacobson, Staffan

    Mechanisms of transfer of aluminium to PVD-coated forming tools

    Ingår i Tribology letters, s. 299-312, 2012.

  • Konferensbidrag

    Särhammar, Erik; Sundberg, Jill; Nyberg, Harald; Kubart, Tomas et al.

    Mechanisms responsible for compositional variations of films sputtered from a WS2 target

    Ingår i International Conference on Metallurgical Coatings and Thin films (ICMCTF) 23-27/04 2012, San Diego, abstract number:428, 2012.

  • Konferensbidrag

    Tkachenko, Sergey; Pettersson, Maria; Schmidt, Susann; Berlind, Torun et al.

    Micro scratch testing of silicon nitride and silicon carbon nitride coatings

    Ingår i Scandinavian Society for Biomaterials, the 5th Annual Meeting, Uppsala, Sweden, May 8-9, 2012., 2012.

  • Artikel i tidskrift

    Andre, Benny; Hollman, Patrik; Wiklund, Urban

    Nanoindentation on micro pillars for determination of intrinsic hardness and residual stress in coatings deposited on complex geometries

    Ingår i Tribologia, s. 22 22-31 31, 2012.

  • Artikel i tidskrift

    Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

    New understanding of the initiation of material transfer and transfer layer build-up in metal forming: In situ studies in the SEM

    Ingår i Wear, s. 61-73, 2012.

  • Konferensbidrag

    Hogmark, Sture; Smid, Michal; Coronel, Ernesto; Wiklund, Urban

    On the residual stresses vs. hardness of tribological surfaces

    2012.

  • Doktorsavhandling, sammanläggning

    Heinrichs, Jannica

    On Transfer of Work Material to Tools

    Open access
  • Artikel i tidskrift

    Broqvist, Natalia; Hogmark, Sture; Medvedeva, A.; Gunnarsson, S.

    On wear resistance of tool steel

    Ingår i Journal of Manufacturing Processes, s. 195-198, 2012.

  • Artikel i tidskrift

    André, Benny; Gustavsson, Fredrik; Svahn, Fredrik; Jacobson, Staffan

    Performance and Tribofilm Formation of a Low-Friction Coating Incorporating Inorganic Fullerene Like Nano-Particles

    Ingår i Surface & Coatings Technology, s. 2325-2329, 2012.

  • Konferensbidrag

    Forsberg, Peter; Hollman, Patrik; Jacobson, Staffan

    Protective tribofilm build up from exhaust residues on the surface on  exhaust valve systems in a test rig

    Ingår i Nordtrib, Trondheim, Norway, 2012, 2012.

  • Konferensbidrag

    Gustavsson, Fredrik; Forsberg, Peter; Renman, Viktor; Hieke, André et al.

    Smart DLC coating top coating for reduction of counter surface wear in fuel contact

    Ingår i Faraday Discussion 156: Tribology, 2012.

  • Konferensbidrag

    Sundberg, Jill; Nyberg, Harald; Särhammar, Erik; Nyberg, Tomas et al.

    Sulfur-doping of nc-TiC/a-C films by reactive sputtering

    Ingår i Thirteenth International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, Germany, 10-14 September 2012, 2012.

  • Konferensbidrag

    Olander, Petra; Hollman, Patrik; Jacobson, Staffan

    Test rig investigations of cylinder liner and piston ring wear caused by transition to greener ship transports: An initial study

    Ingår i Nordtrib 2012, 15th Nordic Symposium on Tribology, Trondheim, June 12-15 2012, 2012.

    Open access
  • Konferensbidrag

    Thersleff, Thomas; Gustavsson, Fredrik; Pohl, Darius; Rellinghaus, Bernd et al.

    The defect landscape and self-ordering mechanism of solid lubricant coatings exhibiting superlubricity

    Ingår i Proceedings of the 15th European Microscopy Congress, s. 493-494, 2012.

  • Artikel i tidskrift

    Olofsson, Johanna; Jacobson, Staffan

    The influence of grain size and surface treatment of the tribofilm formation on alumina components

    Ingår i Wear, s. 17-24, 2012.

  • Artikel i tidskrift

    Olofsson, Johanna; Bexell, Ulf; Jacobson, Staffan

    Tribofilm formation of lightly loaded self mated alumina contacts

    Ingår i Wear, s. 39-45, 2012.

  • Konferensbidrag

    Kassman Rudolphi, Åsa; Wiklund, Urban

    Tribological requirements for selection of new materials for electrical connectors

    Ingår i NordTrib 2012, Trondheim, Norge, 2012.

  • Konferensbidrag

    Gustavsson, Fredrik; Polcar, Tomas; Jacobson, Staffan; Cavaleiro, Albano

    Tribology of selenium-based solid lubricants alloyed with carbon

    Ingår i Advances in lubrication, Costa Rica, 2012.

  • Konferensbidrag

    Forsberg, Peter; Hollman, Patrik; Jacobson, Staffan

    Wear study of coated heavy duty exhaust valve systems in a experimental test rig

    2012.

  • Artikel i tidskrift

    Forsberg, Peter; Hollman, Patrik; Jacobson, Staffan

    Wear study of coated heavy duty exhaust valve systems in a experimental test rig

    Ingår i SAE International technical papers, 2012.

  • Konferensbidrag

    Malmros, Martina; Olsson, Mikael; Bexell, Ulf; Wiklund, Urban

    Assessing the mechanical and electrical properties of aluminium oxide on aluminium using nanoindentation and nanoscratching

    2011.

  • Konferensbidrag

    Pettersson, Maria; Olofsson, Johanna; Teuscher, Nico; Jacobson, Staffan et al.

    Ball-on-disc testing of SiNx coatings for hip joint implants

    2011.

  • Artikel i tidskrift

    Jansson, Ulf; Lewin, Erik; Råsander, Mikael; Eriksson, Olle et al.

    Design of carbide-based nanocomposite thin films by selective alloying

    Ingår i Surface & Coatings Technology, s. 583-590, 2011.

  • Konferensbidrag

    Hieke, André; Håkansson, Greger; Gustavsson, Fredrik; Forsberg, Peter et al.

    DLC coatings for fule injection components to minimize wear and friction in various fuels

    2011.

  • Konferensbidrag

    Heinrichs, Jannica; Jacobson, Staffan

    Evaluation of TiB2 coatings in cold forming of aluminium

    2011.

  • Artikel i tidskrift

    Wiklund, Urban; Rubino, Stefano; Kádas, Krisztina; Skorodumova, Natalia V. et al.

    Experimental and theoretical studies on stainless steel transfer onto a TiN-coated cutting tool

    Ingår i Acta Materialia, s. 68-74, 2011.

  • Artikel i tidskrift

    Ropo, M; Kokko, K; Airiskallio, E; Punkkinen, M P J et al.

    First-principles atomistic study of surfaces of Fe-rich Fe-Cr

    Ingår i Journal of Physics, s. 265004-, 2011.

  • Artikel i tidskrift

    André, Benny; Lewin, Erik; Jansson, Ulf; Wiklund, Urban

    Friction and contact resistance of nanocomposite Ti-Ni-C coatings

    Ingår i Wear, s. 555-566, 2011.

  • Konferensbidrag

    Gustavsson, Fredrik; Polcar, Tomas; Cavaleiro, Albano; Jacobson, Staffan

    Hard low friction WSN coating deposited by magnetron sputtering: Sliding in dry nitrogen

    2011.

  • Konferensbidrag

    Malmros, Martina; Wiklund, Urban

    Nanocomposite Ti-Ni-C Coatings for Electrical Contact Brush Applications

    2011.

  • Konferensbidrag

    André, Benny; Wiklund, Urban

    Nanoindentation on micro pillars for determination of residual stress conditions of PVD coatings

    2011.

  • Artikel i tidskrift

    Olofsson, Johanna; Gerth, Julia; Nyberg, Harald; Wiklund, Urban et al.

    On the influence from micro topography of PVD coatings on friction behaviour, material transfer and tribofilm formation

    Ingår i Wear, s. 204-2057, 2011.

  • Konferensbidrag

    Olofsson, Johanna; Gerth, Julia; Nyberg, Harald; Wiklund, Urban et al.

    On the influence from micro topography of PVD coatings on friction behaviour, material transfer and tribofilm formation

    2011.

  • Konferensbidrag

    Sundberg, Jill; Särhammar, Erik; Nyberg, Harald; Kubart, Tomas et al.

    Quaternary W-S-C-Ti films for tribological applications

    2011.

  • Artikel i tidskrift

    Gerth, Julia; Larsson, Mats; Urban, Wiklund

    Survey of damage mechanisms on PVD coated HSS hobs used in Swedish gear manufacturing industry

    Ingår i Tribologia, s. 37-50, 2011.

  • Konferensbidrag

    Jacobson, Staffan

    The brake pad surface – dynamic materials formation, disintegration and regeneration at the nanoscale

    2011.

  • Konferensbidrag

    Heinrichs, Jannica; Staffan, Jacobson

    The influence from shape and size of tool surface defects on the occurrence of galling in cold forming of aluminium

    2011.

  • Artikel i tidskrift

    Heinrichs, Jannica; Jacobson, Staffan

    The influence from shape and size of tool surface defects on the occurrence of galling in cold forming of aluminium

    Ingår i Wear, s. 2517-2524, 2011.

  • Konferensbidrag

    Alfredsson, Sara; Nyberg, Harald; Hogmark, Sture; Jacobson, Staffan

    Tribological conditions of curling - the ultimate friction sport?

    Ingår i 18th International Conference on Wear of Materials, Philadelphia, USA, April 3-7, 2011, 2011.

  • Artikel i tidskrift

    Forsberg, Peter; Hollman, Patrik; Jacobson, Staffan

    Wear mechanism study of exhaust valve system in modern heavy duty combustion engines

    Ingår i Wear, s. 2477-2484, 2011.

  • Konferensbidrag

    Olofsson, Johanna; Grehk, Mikael; Persson, Cecilia; Jacobson, Staffan et al.

    Analysis of the wear and tribofilm formation on silicon nitride for total hip joint replacement

    Ingår i Asiatrib 2010, 2010.

  • Konferensbidrag

    Gustavsson, Fredrik; Jacobson, Staffan

    Characterization and tribological properties of low-friction tribofilms formed on WS2 coatings in dry sliding: nanoparticle based coatings compared to sputtered coatings

    Ingår i ASIATRIB, 2010.

  • Artikel i tidskrift

    Öberg, Å.; Kassman, Åsa; André, Benny; Wiklund, Urban et al.

    Conductive nanocomposite ceramics as tribological and electrical contact materials

    Ingår i European Physical Journal, s. 22902-, 2010.

  • Artikel i tidskrift

    Wilhelmsson, Ola; Bijelovic, Stojanka; Lindquist, Mattias; André, Benny et al.

    Deposition and characterization of magnetic Ti–Fe–C nanocomposite thin films

    Ingår i Thin Solid Films, s. 2607-2616, 2010.

  • Konferensbidrag

    Rubino, Stefano; Wiklund, Urban; Kádas, Krisztina; Skorodumova, Natalia V. et al.

    Electron Microscopy studies on stainless steel transfer onto a TiN coated cutting tool

    2010.

  • Konferensbidrag

    Rubino, Stefano; Wiklund, Urban; Kádas, Krisztina; Skorodumova, Natalia V. et al.

    Electron Microscopy studies on stainless steel transfer onto a TiN coated cutting tool

    Ingår i 17th International Microscopy Congress - Rio de Janeiro19-24 September 2010, 2010.

  • Konferensbidrag

    Riddar, Frida; Kassman Rudolphi, Åsa; Hogmark, Sture

    Frequency- and contact load dependency for pneumatic clutch actuators

    Ingår i Proceedings of NORDTRIB 2010 : 14th Nordic Symposium on Tribology, 2010.

  • Konferensbidrag

    André, Benny; Wiklund, Urban

    Friction and wear dependence of nc-TiNiC:a-C by environment and test conditions

    2010.

  • Konferensbidrag

    Gustavsson, Fredrik; Jacobson, Staffan

    Friction behaviour of Fullerene Like WS2 nanoparticles in a Ni-matrix compared to PVD WS2 and MoS2 coatings

    Ingår i ICMCTF, 2010.

  • Konferensbidrag

    Heinrichs, Jannica; Jacobson, Staffan

    Influence from PVD coatings on galling tendency in cold forming

    2010.

  • Konferensbidrag

    Nyberg, Harald; Olofsson, Johanna; Gerth, Julia; Wiklund, Urban et al.

    Influence on surface micro topography of HSS surfaces from argon ion etch cleaning

    2010.

  • Konferensbidrag

    Gustavsson, Fredrik; Forsberg, Peter; Jacobson, Staffan

    Investigations of the friction behaviour and surface modifications for low-friction coatings in traditional and new alternative fuels

    Ingår i NordTrib 2010, 2010.

  • Artikel i tidskrift

    Heinrichs, Jannica; Jacobson, Staffan

    Laboratory test simulation of aluminium cold forming – influence from PVD tool coatings on the tendency to galling

    Ingår i Surface & Coatings Technology, s. 3606-3613, 2010.

  • Konferensbidrag

    Malmros, Martina; Wiklund, Urban

    Nanocomposite Coatings for Contact Brush Applications

    Ingår i Proceedings of the 4th International Tribology Congress, ASIATRIB2010, 2010.

  • Konferensbidrag

    Nyberg, Harald; Olofsson, Johanna; Gerth, Julia; Wiklund, Urban et al.

    On the influence from micro topography on the structure and growth of low friction amorphous carbon PVD coatings

    Ingår i Twelfth International Conference on Plasma Surface Engineering (PSE 2010), September 13-17, 2010, Garmisch-Partenkirchen, 2010.

  • Konferensbidrag

    Jacobson, Staffan

    Resistance to abrasive wear – fundamental and practical aspects: Keynote Lecture

    2010.

  • Artikel i tidskrift

    Lewin, Erik; André, Benny; Urbonaite, Sigita; Wiklund, Urban et al.

    Synthesis, structure and properties of Ni-alloyed TiCx-based thin films

    Ingår i Journal of Materials Chemistry, s. 5950-5960, 2010.

  • Konferensbidrag

    Heinrichs, Jannica; Jacobson, Staffan

    The Importance of Tool Surface Roughness on the Galling Tendencies in Cold Forming of Aluminium

    2010.

  • Konferensbidrag

    Forsberg, Peter; Nyberg, Harald; Jacobson, Staffan; Hollman, Patrik et al.

    The Uppsala Load Scanner –Second generation

    Ingår i Nordtrib 2010, Storforsen, Sweden, 2010.

  • Kapitel i bok, del av antologi

    Jacobson, Staffan; Hogmark, Sture

    Tribofilms – On the crucial importance of tribologically induced surface modifications

    Ingår i Recent Developments in Wear Prevention, Friction and Lubrication, s. 197-225, 2010.

  • Konferensbidrag

    Forsberg, Peter; Gustavsson, Fredrik; Jacobson, Staffan

    Tribological behaviour for low-friction coatings at conformal contact pressure in traditional and new-alternative fuels

    Ingår i ASIATRIB 2010,  PERTH, WESTERN AUSTRALIA, 5-9 DECEMBER 2010, 2010.

  • Artikel i tidskrift

    Iwai, Yoshiro; Matsubara, Tohru; Hirai, Yuichi; Hogmark, Sture

    Development of a new type micro slurry-jet erosion (MSE) tester for evaluation of wear properties of hard thin coatings

    Ingår i Lubrication Science, s. 213-226, 2009.

  • Konferensbidrag

    Rubino, Stefano; Hanson, Magnus; Hogmark, Sture; Leifer, Klaus

    EFTEM studies on the adhesion of stainless steel against a V40 steel forming tool

    Ingår i EDGE 2009 - International EELS Workshop, Banff, Canada 17-22 May 2009, 2009.

    Open access
  • Konferensbidrag

    Iwai, Y; Miyajima, T; Mizuno, A; Asami, Y et al.

    Evaluation of Wear Properties of DLC Films by a Micro Slurry-Jet Erosion (MSE) Test

    Ingår i WOM 2009 in Las Vegas 19-23/4 2009, 2009.

  • Artikel i tidskrift

    Lewin, Erik; Olsson, Erik; André, Benny; Joelsson, Torbjörn et al.

    Industrialisation Study of Nanocomposite nc-TiC/a-C Coatings for Electrical Contact Applications

    Ingår i Plasma Processes and Polymers, s. S928-S934, 2009.

  • Artikel i tidskrift

    Olofsson, Johanna; Johansson, Stefan; Jacobson, Staffan

    Influence from humidity on the alumina friction drive system of an ultrasonic motor

    Ingår i Tribology International, s. 1467-1477, 2009.

  • Artikel i tidskrift

    Hanson, Magnus; Hogmark, Sture; Jacobson, Staffan

    Influence from tool roughness on the risk of work material adhesion and transfer

    Ingår i Materials and Manufacturing Processes, s. 913-917, 2009.

  • Konferensbidrag

    Heinrichs, Jannica; Jacobson, Staffan

    Influence of aluminium pre-treatment on galling in cold forming

    2009.

  • Artikel i tidskrift

    Lindgren, M; Åstrand, M; Wiklund, Urban; Engqvist, Håkan

    Investigation of boundary conditions for biomimetic HA deposition on titanium oxide surfaces

    Ingår i Journal of materials science. Materials in medicine, s. 1401-1408, 2009.

  • Konferensbidrag

    Heinrichs, Jannica; Jacobson, Staffan

    Laboratory test simulation of aluminium cold forming: influence from PVD coatings on the tool on the tendency to galling

    s. 87-92 2009.

  • Artikel i tidskrift

    Heinrichs, Jannica; Jacobson, Staffan

    Laboratory test simulation of galling in cold forming of aluminium

    Ingår i Wear, s. 2278-2286, 2009.

  • Artikel i tidskrift

    Iwai, Y.; Miyajima, T.; Mizuno, A.; Honda, T. et al.

    Micro-Slurry-jet Erosion (MSE) testing of CVD TiC/TiN and TiC coatings

    Ingår i Wear, s. 264-269, 2009.

  • Konferensbidrag

    Olofsson, Johanna; Lindberg, Fredrik; Johansson, Stefan; Jacobson, Staffan

    On the role of tribofilm formation on the alumina drive components of an ultrasonic motor

    2009.

  • Artikel i tidskrift

    Olofsson, Johanna; Lindberg, Fredrik; Johansson, Stefan; Jacobson, Staffan

    On the role of tribofilm formation on the alumina drive components of an ultrasonic motor

    Ingår i Wear, s. 1295-1300, 2009.

  • Konferensbidrag

    Jacobson, Staffan; Hogmark, Sture

    On the Vital Importance of Dynamics and Modifications in tribological Surfaces-Illustrating Examples from Practical Applications

    2009.

  • Artikel i tidskrift

    Gerth, Julia; Larsson, Mats; Wiklund, Urban; Riddar, Frida et al.

    On the wear of PVD-coated HSS hobs in dry gear cutting

    Ingår i Wear, s. 444-452, 2009.

  • Konferensbidrag

    André, Benny; Gustavsson, Fredrik; Svahn, Fredrik; Jacobson, Staffan

    Performance and Tribofilm Formation of a Low-Friction Coating Incorporating Inorganic Fullerene Like Nano-Particles

    2009.

  • Konferensbidrag

    André, Benny; Gustavsson, Fredrik; Svahn, Fredrik; Jacobson, Staffan

    Potential of a new low-friction coating based on inorganic fullerens: comparison with state-of-the-art PVD coatings

    s. 400- 2009.

  • Konferensbidrag

    Broqvist, Natalia; Hogmark, Sture; Gunnarsson, S.

    Properties affecting machinability of hot work tool steels

    Ingår i Tool Steels - Deciding Factor in Worldwide Production, 2009.

  • Artikel i tidskrift

    Gerth, Julia; Werner, Mathias; Larsson, Mats; Wiklund, Urban

    Reproducing wear mechanisms in gear hobbing: Evaluation of a single insert milling test

    Ingår i Wear, s. 2257-2268, 2009.

  • Artikel i tidskrift

    Holmberg, Kenneth; Ronkainen, Helena; Laukkanen, Anssi; Wallin, Kim et al.

    Residual stresses in TiN, DLC and MoS2 coated surfaces with regard to their tribological fracture behaviour

    Ingår i Wear, s. 2142-2156, 2009.

  • Artikel i tidskrift

    Jacobson, Staffan; Hogmark, Sture

    Surface modifications in tribological contacts

    Ingår i Wear, s. 370-378, 2009.

  • Artikel i tidskrift

    Coronel, E; Wiklund, Urban; Olsson, E

    The effect of carbon content on the microstructure of hydrogen-free physical vapour deposited titanium carbide films

    Ingår i Thin Solid Films, s. 71-76, 2009.

  • Konferensbidrag

    Olofsson, Johanna; Johansson, Stefan; Jacobson, Staffan

    The effect of grain size on the tribofilm formation on the alumina friction drive system of an ultrasonic motor

    Ingår i ECOTRIB 09, s. 965-970, 2009.

  • Artikel i tidskrift

    Nilsson, D; Stavlid, N; Lindquist, M; Hogmark, Sture et al.

    The role of aluminum additions in the oxidation and wear of a TaC:C low-friction coating

    Ingår i Surface and Coatings Technology, s. 2989-2994, 2009.

  • Konferensbidrag

    Olofsson, Johanna; Jacobson, Staffan

    The Role of Surface Treatment in the Tribofilm Formation on Alumina Friction Drive Components

    Ingår i World tribology congress 2009, Kyoto, 2009.

  • Artikel i tidskrift

    Lindquist, Mattias; Wilhelmsson, Ola; Jansson, Ulf; Wiklund, Urban

    Tribofilm formation and tribological properties of TiC and nanocomposite TiAlC coatings

    Ingår i Wear, s. 379-387, 2009.

  • Artikel i tidskrift

    Lindquist, Mattias; Wilhelmsson, Ola; Jansson, Ulf; Wiklund, Urban

    Tribofilm formation from TiC and nanocomposite TiAlC coatings, studied with Focused Ion Beam and Transmission Electron Microscopy

    Ingår i Wear, s. 988-994, 2009.

  • Konferensbidrag

    Gerth, Julia; Wiklund, Urban

    Wear of an AlCrN coated HSS Hob in Dry Gear Cutting

    Ingår i HSS FORUM - Smart Solutions for the Future of Metal Cutting, 2009.

  • Artikel i tidskrift

    Riddar, Frida; Kassman Rudolphi, Åsa; Hogmark, Sture

    Wear study of field worn clutch actuators and evaluation of a model test

    Ingår i Wear, s. 2269-2272, 2009.

  • Konferensbidrag

    Riddar, Frida; Kassman Rudolphi, Åsa; Hogmark, Sture

    Wear tests of pneumatic cylinders of aluminium from permanent mould casting and extrusion

    Ingår i Proceedings of the 2nd European Conference on Tribology (ECOTRIB 2009), 2009.

  • Artikel i tidskrift

    Beste, Ulrik; Jacobson, Staffan

    A new view of the deterioration and wear of WC/Co cemented carbide rock drill buttons

    Ingår i Wear, s. 1129-1141, 2008.

  • Artikel i tidskrift

    Casas, B.; Wiklund, Urban; Lanes, L.M.; Hogmark, Sture

    Adhesion and abrasive wear resistance of TiN deposited on electrical discharge machined WC-Co cements rbides

    Ingår i Wear, s. 490-496, 2008.

  • Rapport

    Jacobson, Staffan

    Att skriva tekniska och vetenskapliga rapporter – Korta tips, regler och exempel för effektiv kommunikation i skrift

    2008.

  • Konferensbidrag

    Jacobson, Staffan; Åstrand, Mikael

    Avoiding slip accidents – about the friction in walking on hard floorings

    2008.

  • Artikel i tidskrift

    Duda, Laurent; Andersson, Joakim; Schmitt, Thorsten; Jacobson, Staffan

    Chemical modification in wear tracks of chemical vapor deposited diamond surfaces studied with X-ray absorption spectroscopy

    Ingår i Tribology letters, s. 31-34, 2008.

  • Konferensbidrag

    André, Benny; Jacobson, Staffan

    Comparisons between commercial low-friction coatings and emerging coating concepts in ball-on-disc tests – coefficient of friction, tribofilm formation and surface damage

    2008.

  • Konferensbidrag

    Öberg, Åke; Kassman Rudolphi, Åsa; Wiklund, Urban; André, Benny et al.

    Conductive nanocomposite ceramics as tribological and electrical contact materials

    Ingår i International Conference on Electrical Contacts, ICEC 2008, 2008.

  • Artikel i tidskrift

    Hammerström, Lars; Jacobson, Staffan

    Designed high-friction surfaces: influence of roughness and deformation of the counter surface

    Ingår i Wear, s. 807-814, 2008.

  • Artikel i tidskrift

    Hu, Qing-Miao; Kádas, Krisztina; Hogmark, Sture; Yang, Rui et al.

    Hardness and elastic properties of covalent/ionic solid solutions from first-principles theory

    Ingår i Journal of Applied Physics, s. 083505-, 2008.

  • Artikel i tidskrift

    Lindberg, Fredrik; Heinrichs, Jannica; Ericson, Fredric; Thomsen, Peter et al.

    Hydroxylapatite growth on single-crystal rutile substrates

    Ingår i Biomaterials, s. 3317-3323, 2008.

  • Konferensbidrag

    Heinrichs, Jannica; Jarmar, Tobias; Rooth, Mårten; Engqvist, Håkan

    In vitro bioactivity of Atomic Layer Deposited titanium dioxide on titanium and silicon substrates

    Ingår i BIOCERAMICS, VOL 20, PTS 1 AND 2, s. 689-692, 2008.

  • Konferensbidrag

    Hanson, Magnus; Hogmark, Sture; Jacobson, Staffan

    Influence from tool roughness on the risk of work material adhesion and transfer

    2008.

  • Konferensbidrag

    Olofsson, Johanna; Johansson, Stefan; Jacobson, Staffan

    Influences from humidity on the friction drive system of a piezoelectric motor

    2008.

  • Rapport

    Kassman Rudolphi, Åsa; Orvehed, Maria; Woldegiorgis, Sara

    Ingenjörsutbildningar vid Uppsala universitet. Studenter granskar några utbildningar ur genusperspektiv

    2008.

    Open access
  • Konferensbidrag

    Heinrichs, Jannica; Jacobson, Staffan

    Lab test simulation of galling in cold forming of aluminium

    Ingår i NordTrib 2008, 2008.

  • Artikel i tidskrift

    Hanson, Magnus; Stavlid, Nils; Coronel, Ernesto; Hogmark, Sture

    On adhesion and metal transfer in sliding contact between TiN and austenitic stainless steel

    Ingår i Wear, s. 781-787, 2008.

  • Artikel i tidskrift

    Hanson, Magnus; Hogmark, Sture; Coronel, Ernesto; Persson, Daniel H.E.

    On adhesion of work material in metal forming

    Ingår i International journal of microstructure and materials properties, s. 401-412, 2008.

  • Konferensbidrag

    Hogmark, Sture; Sturesson, Peter; Jacobson, Staffan

    On the mechanisms of friction between skis and snow and implications on how to prepare the skis for optimum glide

    2008.

  • Konferensbidrag

    Broqvist, Natalia; Hogmark, Sture; Gunnarsson, S.; Björk, T. et al.

    On the relation between composition, oxidation and machinability of tool steels

    2008.

  • Konferensbidrag

    Riddar, Frida; Kassman Rudolphi, Åsa; Hogmark, Sture

    On the wear of pneumatic clutch actuators

    Ingår i Proceedings of NORDTRIB 2008 : 13th Nordic Symposium on Tribology, 2008.

  • Artikel i tidskrift

    Heinrichs, Jannica; Jarmar, Tobias; Wiklund, Urban; Engqvist, Håkan

    Physical vapour deposition and bioactivity of crystalline titanium dioxide thin films

    Ingår i Trends in Biomaterials & Artificial Organs, s. 104-110, 2008.

  • Konferensbidrag

    Gerth, Julia; Werner, Mathias; Larsson, Mats; Wiklund, Urban

    Reproducing wear mechanisms in gear hobbing: evaluation of a single insert milling test

    Ingår i Proceedings of the International conference Nordtrib 2008, 2008.

  • Konferensbidrag

    Holmberg, Kenneth; Ronkainen, H; Laukkanen, A; Wallin, K et al.

    Residual stresses in TiN, DLC and MoS2 coated surfaces with regard to their tribological fracture behaviour

    Ingår i Proceedings of the International conference Nordtrib 2008:, 2008.

  • Artikel i tidskrift

    Beste, Ulrik; Jacobson, Staffan; Hogmark, Sture

    Rock penetration into cemented carbide drill buttons during rock drilling

    Ingår i Wear, s. 1142-1151, 2008.

  • Artikel i tidskrift

    Beste, Ulrik; Jacobson, Staffan

    Targeting micro-sectioning: A technique to study subsurface features in worn specimens

    Ingår i Wear, s. 1152-1156, 2008.

  • Konferensbidrag

    André, Benny; Lewin, Erik; Lindquist, Mattias; Jansson, Ulf et al.

    Tribological testing of ceramic coatings boosted for low friction and for use in electrical contacts

    2008.

  • Konferensbidrag

    Olofsson, Johanna; Johansson, Stefan; Jacobson, Staffan

    Analysis of the tribofilm formation on the friction drive surfaces of a piezoelectric motor

    Ingår i ASME/STLE International Joint Tribology Conference, Parts A and B, s. 871-872, 2007.

  • Konferensbidrag

    Hanson, Magnus; Gåård, A.; Hogmark, Sture; Bergström, J.

    Comparison between two test methods for avaluation of forming tool materials

    2007.

  • Artikel i tidskrift

    Hanson, Magnus; Gåård, A.; Krakhmalev, P.; Hogmark, Sture et al.

    Comparison of two test methods for evaluation of forming tool materials

    Ingår i Tribotest, s. 147-158, 2007.

  • Artikel i tidskrift

    Wilhelmsson, Ola; Råsander, Mikael; Carlsson, Mattias; Lewin, Erik et al.

    Design of Nanocomposite Low-Friction Coatings

    Ingår i Advanced Functional Materials, s. 1611-1616, 2007.

  • Konferensbidrag

    Lewin, Erik; Wilhelmsson, Ola; Jansson, Ulf; Lindquist, Mattias et al.

    Design of sputtered nc-MeC/a-C nanocomposite coatings through doping with a second metallic element

    Ingår i E-MRS spring meeting 2007 (Strasbourg 28 maj - 1 juni), 2007.

  • Artikel i tidskrift

    Hogmark, Sture; Jacobson, Staffan; Coronel, E.

    On adhesion in tribological contacts-Causes and consequences

    Ingår i Tribologia, s. 3-16, 2007.

  • Artikel i tidskrift

    Hu, Qing-Miao; Kádas, Krisztina; Hogmark, Sture; Yang, R. et al.

    Predicting hardness of covalent/ionic solid solution from first-principles theory

    Ingår i Applied Physics Letters, s. 121918-, 2007.

  • Konferensbidrag

    Jacobsson, Staffan; Hogmark, Sture

    Surface modifications in tribological contacts

    s. 599-612 2007.

  • Artikel i tidskrift

    Pettersson, Ulrika; Jacobson, Staffan

    Textured surfaces for improved lubrication at high pressure and low sliding speed of roller/piston in hydraulic motors

    Ingår i Tribology International, s. 355-359, 2007.

  • Artikel i tidskrift

    Pettersson, Ulrika; Jacobson, Staffan

    Textured surfaces in sliding boundary lubricated surfaces – mechanisms, possibilities and limitations

    Ingår i Tribology - Materials, Surfaces & Interfaces, s. 181-189, 2007.

  • Artikel i tidskrift

    Gerth, Julia; Wiklund, Urban

    The influence of metallic interlayers on the adhesion of pVD TiN coatings on high-speed steel

    Ingår i Wear, s. 885-892, 2007.

  • Artikel i tidskrift

    Ropo, M.; Kokko, K.; Punkkinen, M.P.J.; Hogmark, Sture et al.

    Theoretical evidence of the compositional threshold behavior of FeCr surfaces

    Ingår i Physical Review B. Condensed Matter and Materials Physics, s. 220401-1-220401-4, 2007.

  • Konferensbidrag

    Lindquist, M; Wilhelmsson, O; Jansson, U; Wiklund, Urban

    Tribofilm formation and tribological properties of nanocomposite TiC and TiAlC coatings

    2007.

  • Konferensbidrag

    Riddar, Frida; Kassman Rudolphi, Åsa; Jacobson, Staffan; Hogmark, Sture et al.

    Tribological surfaces of a pneumatic clutch actuator

    Ingår i Proceeding of ECOTRIB 2007, Slovenien Society for Tribology, June 12-15, 2007, s. 955-967, 2007.

  • Konferensbidrag

    Andre, Benny; Kassman, Åsa; Jansson, U.

    Tribology of nanocomposite materials in electrical contacts

    2007.

  • Konferensbidrag

    Gerth, Julia; Larsson, Mats; Wiklund, Urban

    Wear propagation of PVD AlCrN coated HSS hob in dry gear hobbing

    2007.

  • Artikel i tidskrift

    Vitos, Levente; Larsson, Karin; Johansson, Börje; Hanson, Magnus et al.

    An atomistic approach to the initiation mechanism of galling

    Ingår i Computational materials science, s. 193-197, 2006.

  • Konferensbidrag

    Jacobson, Staffan; Hogmark, Sture

    Coating materials optimised for lubricated contacts

    2006.

  • Artikel i tidskrift

    Podgornik, B.; Hren, D.; Vizintin, J.; Jacobson, Staffan et al.

    Combiantion of DLC coatings and EP additivesfor improveds tribological behaviour of boundary lubricated surfaces

    Ingår i Wear, s. 32-, 2006.

  • Artikel i tidskrift

    Podgornik, B; Hren, D; Vizintin, J; Jacobsson, Staffan et al.

    Combination of DLC coatings and EP additives for improved tribological behaviour of boundary lubricated surfaces

    Ingår i Wear, s. 32-40, 2006.

  • Konferensbidrag

    Hammerström, Lars; Jacobsson, Staffan

    Designed High-friction surfaces - influence of roughness and deformation of the sountersurface

    2006.

  • Artikel i tidskrift

    Wiklund, Urban; Stavlid, Nils; Hogmark, Sture

    Development of monolayered low friction PVD ceramic coatings for application on tools and mechanical components

    Ingår i Advances in Science and Technology, s. 122-131, 2006.

  • Konferensbidrag

    Wiklund, Urban; Stavlid, Nils; Hogmark, Sture

    Development of monolayered low friction PVD ceramic coatings for application on tools and mechanical components

    Ingår i Advances in Science and Technology, s. 2750-, 2006.

  • Artikel i tidskrift

    Hogmark, Sture; Jacobson, Staffan

    Editorial

    Ingår i Wear, s. 1-, 2006.

  • Artikel i tidskrift

    Forsberg, Markus; Andersson, Joakim; Jacobson, Staffan

    Geometrically Defined All-Diamond Abrasive Surfaces for Pad Conditioning in Chemical Mechanical Polishing

    Ingår i J Electrochem Soc, s. G1-G6, 2006.

  • Konferensbidrag

    Andersson, S; Larsson, R; Jacobson, Staffan; Höglund, E

    HiMeC - A Swedish Programme for research and Doctoral Studies

    2006.

  • Artikel i tidskrift

    Podgornik, B.; Vizintin, J.; Hogmark, Sture

    Improvement in galling performance through surface engineering

    Ingår i Surface Engineering, s. 235-238, 2006.

  • Konferensbidrag

    Coronel, Ernesto; Hanson, Magnus; Leifer, Klaus; Hogmark, Sture

    Mechanisms of Work Material Adhesion in Tooling Operations Revealed by TEM

    2006.

  • Konferensbidrag

    Jacobson, Staffan

    Nature of tribological interface of automotive brakes in Advanced in asbestos-free friction composites

    2006.

  • Artikel i tidskrift

    Svahn, Fredrik; Kassman-Rudolphi, Åsa; Hogmark, Sture

    On the effect of surface topography and humidity on lubricated running-in of a carbon based coating

    Ingår i Wear, s. 1237-1246, 2006.

  • Konferensbidrag

    Jacobson, Staffan

    On the possiblities of designing static contact interfaces with strong grip

    2006.

  • Artikel i tidskrift

    Persson, Daniel H. E.; Coronel, Ernesto; Jacobson, Staffan; Hogmark, Sture

    Surface analysis of laser cladded Stellite exposed to self-mated high load dry sliding

    Ingår i Wear, s. 96-100, 2006.

  • Artikel i tidskrift

    Hammerström, Lars; Jacobson, Staffan

    Surface modification of brake discs to reduce squeal prob-lems

    Ingår i Wear, s. 53-57, 2006.

  • Artikel i tidskrift

    Hammerström, Lars; Jacobson, Staffan

    Surface modification of brake discs to reduce squeal problems

    Ingår i Wear, s. 53-57, 2006.

  • Artikel i tidskrift

    Pettersson, Ulrika; Jacobson, Staffan

    Tribological texturing of steel surfaces with a novel diamond embossing tool technique

    Ingår i Tribology International, s. 695-700, 2006.

  • Artikel i tidskrift

    Beste, Ulrik; Coronel, Ernesto; Jacobson, Staffan

    Wear induced material modification of cemented carbide rock drills

    Ingår i Int. Journal of Refractory Metals and Hard Materials, s. 168-176, 2006.

  • Artikel i tidskrift

    Beste, Ulrik; Coronel, Ernesto; Jacobson, Staffan

    Wear induced material modifications of cemented carbide rock drill buttons

    Ingår i International journal of refractory metals & hard materials, s. 168-176, 2006.

  • Konferensbidrag

    Andersson, Joakim; Forsberg, Markus; Hollman, Patrik; Jacobson, Staffan

    A geometrically defined all-diamond pad conditioner

    Ingår i World Tribology Congress III, Washington., 2005.

  • Konferensbidrag

    Jacobson, Staffan; Kälvesten, Ellen; Pettersson, Ulrika

    Effect of surface textures in highly loaded grease lubricated reciprocating sliding contacts

    Ingår i World Tribology Congress III, Washington., 2005.

  • Konferensbidrag

    Persson, Daniel; Hammerström, Lars; Jacobson, Staffan; Hogmark, Sture

    High Resolution Characterisation of Friction Induced Deformation using the FIB

    Ingår i International Tribology Conference, Kobe., 2005.

  • Artikel i tidskrift

    Podgornik, Bojan; Jacobson, Staffan; Hogmark, Sture

    Influence of EP additive concentration on the tribological behaviour of DLC-coated steel surfaces

    Ingår i Surface and Coatings Technology, s. 357-366, 2005.

  • Konferensbidrag

    Hogmark, Sture; Svahn, Fredrik; Stavlid, Nils; Wiklund, Urban et al.

    Possibilities for Optimisation of Low friction coatings

    Ingår i International Tribology Conference, Kobe., 2005.

  • Konferensbidrag

    Hammerström, Lars; Jacobson, Staffan

    Reduction of Brake Squeal using Brake Disc Surface Modifications

    Ingår i International Tribology Conference, Kobe., 2005.

  • Artikel i tidskrift

    Persson, A; Hogmark, Sture; Bergström, J

    Therma fatigue cracking of surface engineered hot work tool steel

    Ingår i Surface and Coatings Technology, s. 216-227, 2005.

  • Konferensbidrag

    Jacobson, Staffan; Hogmark, Sture

    Tribological conditions for successful solid lubrication

    Ingår i International Tribology Conference, Kobe., 2005.

  • Konferensbidrag

    Hammam, Tag; Per, Lundström; Kassman Rudolphi, Åsa

    Vibration-induced deterioration of tin-coated conncetors studied by using a force controlled fretting bench-test

    Ingår i Proc. 51st IEEE Holm Conf. on Electrical Contacts, s. 97-106, 2005.

  • Artikel i tidskrift

    Hogmark, Sture; Olsson, Mikael

    Wear mechanisms of HSS cutting tools

    Ingår i SME (Society of Manufacturing Engineeres) Technical Paper, s. 1-14, 2005.

  • Konferensbidrag

    Hogmark, Sture; Olsson, Mikael

    Wear mechanisms of HSS metal cutting tools

    Ingår i Proceedings of the 1st International HSS Forum Conference : Smart Solutions for Metal Cutting, February 2-3, 2005, Aachen, Germany., 2005.

  • Artikel i tidskrift

    Carlsson, Mattias; Wiklund, Urban

    A comparative evaluation method for low friction coatings in dry sliding thrust bearings

    Ingår i Tribologia, s. 27-36, 2004.

  • Artikel i tidskrift

    Nilsson, Daniel; Wiklund, Urban

    A flexible laboratory-scale approach to alloying and tailoring of thin films by single-magnetron co-sputtering

    Ingår i Thin Solid Films, s. 10-15, 2004.

  • Artikel i tidskrift

    Podgornik, B; Hogmark, Sture; Pezdirnik, J

    Comparison between different test methods for evaluation of galling properties of surface engineered tool surfaces

    Ingår i Wear, s. 843-851, 2004.

  • Konferensbidrag

    Persson, Daniel; Coronel, Ernesto; Jacobson, Staffan; Hogmark, Sture

    Contact pressure induced shifts in the friction behaviour of laser processed stellite

    s. 340- 2004.

  • Artikel i tidskrift

    Persson, A; Hogmark, Sture; Bergström, J

    Failure modes in field tested brass die casting dies,

    Ingår i Journal of Materials Processing Technology, s. 108-118, 2004.

  • Artikel i tidskrift

    Pettersson, Ulrika; Jacobson, Staffan

    Friction and wear properties of micro textured DLC coated surfaces in boundary lubricated contacts

    Ingår i Tribology letters, s. 553-559, 2004.

  • Konferensbidrag

    Hogmark, Sture

    Friction Mechanisms of Coated Tribological Components

    Ingår i Proceedings of the VTI conference Challenges in Surface Engineering, Ghent, Belgium,, 2004.

  • Konferensbidrag

    Hogmark, Sture; Sandberg,, Odd

    Influence of surface roughness and coating type on galling properties of forming tools

    Ingår i Int. Conf. on Recent Advances in Manufacture & Use of Tools and Dies, and Stamping of Steel Sheets, Olofström, Sweden, 2004.

  • Artikel i tidskrift

    Podgornik,, B; Sandberg, O; Hogmark, Sture

    Influence of surface roughness and coating type on the galling properties of coated forming tool steel

    Ingår i Surface and Coatings Technology, s. 338-348, 2004.

  • Konferensbidrag

    Hogmark, Sture; Nilsson, Daniel; Svahn, Fredrik; Ignberg, L

    Interactive Tribological Coatings

    Ingår i COST 532 Conference in Ghent, s. 68-75, 2004.

  • Artikel i tidskrift

    Beste, Ulrik; Lundvall, A; Jacobson, Staffan

    Micro-scratch evaluation of rock types - a means to comprehend rock drill wear

    Ingår i Trib. Int, s. 203-210, 2004.

  • Artikel i tidskrift

    Longtin, R; Fauteux, C; Coronel, Ernesto; Wiklund, Urban et al.

    Nanoindentation of carbon microfibers deposited by laser-assisted chemical vapor deposition

    Ingår i Appl. Phys. A, s. 573-577, 2004.

  • Konferensbidrag

    Beste, Ulrik; Jacobson, Staffan

    Penetrated rock as a weakening mechanism in cemented carbide rock drill wear.

    Ingår i Nordtrib 2004, Tromsö, Norway, s. 627–636-, 2004.

  • Konferensbidrag

    Andersson, Joakim; Schmitt, Thorsten; Duda, Laurent; Jacobson, Staffan

    Phase transformations in CVD diamond wear tracks revealed by NEXAFS mapping

    Ingår i Nordtrib 2004, Tromsö, Norway, 2004.

  • Artikel i tidskrift

    Pallas, A.; Engqvist, Håkan; Jacobson, Staffan; Hermansson, Leif

    Scratch Testing of a Dental Restorative Material based on Calcium Aluminate

    Ingår i Ceramic Engineering and Science Proc, s. 577-, 2004.

  • Konferensbidrag

    Pallas, A.; Engqvist, Håkan; Jacobson, Staffan; Hermansson, Leif

    Scratch testing of a dental restorative material based on calcium aluminate

    Ingår i 28 th International Cocoa Beach Conference and Exposition on Advanced Ceramics & Composites, Cocoa Beach, 2004.

  • Artikel i tidskrift

    Westergård, Rickard; Hogmark, Sture

    Sealing to improve the wear characteristics of sprayed alumina through electro-deposited Ni

    Ingår i Wear, s. 1153-1162, 2004.

  • Artikel i tidskrift

    Westergård, Richard; Hogmark, Sture

    Sealing to improve the wear of properties of plasma sprayed alumina by electro-deposited Ni

    Ingår i www.sciencedirect.com, 2004.

  • Artikel i tidskrift

    Persson, A; Hogmark, Sture; Bergström, J

    Simulation and evaluation of thermal fatigue cracking of hot work tool steel

    Ingår i International Journal of Fatigue, s. 1095-1107, 2004.

  • Konferensbidrag

    Hogmark, Sture

    Surface engineering - Which are the gains

    Ingår i VTI conference Challenges in Surface Engineering, Ghent,, 2004.

  • Konferensbidrag

    Hammerström, Lars; Jacobson, Staffan

    Surface modification of brake discs to reduce squealing problems."

    Ingår i Nordtrib 2004, Tromsö, Norway, 2004.

  • Artikel i tidskrift

    Persson, A; Hogmark, Sture; Bergström, J

    Temperature profiles and conditions for thermal fatigue cracking in brass die casting dies

    Ingår i Journal of Materials Processing Technology, s. 228-236, 2004.

  • Konferensbidrag

    Pettersson, Ulrika; Jacobson, Staffan

    The effect of embossed surface textures on the friction and wear in a boundary lubricated contact

    Ingår i Nordtrib 2004, Tromsö, Norway, 2004.

  • Artikel i tidskrift

    Podgornik, B; Vizintin, J; Jacobson, Staffan; Hogmark, Sture

    Tribological behaviour of WC/C coatings operating under different lubrication regimes.

    Ingår i Surface and Coatings Technology, s. 558-565., 2004.

  • Artikel i tidskrift

    Westergård, Rickard; Hogmark, S; Vuoristo, P

    Tribological properties of sprayed alumina coatings sealed by electro-deposition of Cu

    Ingår i Wear, s. 1163-1175, 2004.

  • Artikel i tidskrift

    Podgornik, B.; Hogmark, Sture; Sandberg, O

    Wear and friction properties of coatings for forming tools

    Ingår i Strojniski vestnik – Journal of Mechanical Engineering, s. 156-, 2004.

  • Konferensbidrag

    Beste, Ulrik; Coronel, Ernesto; Jacobson, Staffan

    Wear induced material modification of cemented carbide rock drills

    Ingår i Conf on Hard Materials, Puert Rico, 2004.

  • Konferensbidrag

    Hogmark, Sture; Olsson, M

    Wear mechanisms of HSS metal cutting tools

    Ingår i Proceedings of the 1st International HSS Forum Conference : Smart Solutions for Metal, 2004.

  • Övrigt

    Hogmark, Sture

    Biographical item: "Olof Vingsbo - Obituary" in Tribology International, Vol 36, Issue 7, pp 493-494

    2003.

  • Artikel i tidskrift

    Pettersson, Ulrika; Jacobson, Staffan

    Influence of surface texture on boundary lubricated sliding contacts

    Ingår i Tribology International, s. 857-864, 2003.

  • Artikel i tidskrift

    Nilsson, Daniel; Svahn, Fredrik; Wiklund, Urban; Hogmark, Sture

    Low-friction carbon-rich carbide coatings deposited by co-sputtering

    Ingår i Wear, s. 1084 1084-1091 1091, 2003.

  • Artikel i tidskrift

    Nilsson, Daniel; Svahn, Fredrik; Wiklund, Urban; Hogmark, Sture

    Low-friction carbon-rich carbide coatings deposited by co-sputtering

    Ingår i Wear, s. 1084 1084-1091 1091, 2003.

  • Artikel i tidskrift

    Nilsson, Daniel; Svahn, Fredrik; Wiklund, Urban; Hogmark, Sture

    Low-friction carbon-rich carbide coatings deposited by co-sputtering

    Ingår i Wear, s. 1084 1084-1091 1091, 2003.

  • Artikel i tidskrift

    Westergård, Richard; Svahn, Fredrik; Wiklund, Urban

    Novel load-carrying layers to support low-friction PVD coatings

    Ingår i Surface and Coatings Technology, s. 14 14-22 22, 2003.

  • Artikel i tidskrift

    Westergård, Rickard; Svahn, Fredrik; Wiklund, Urban

    Novel load-carrying layers to support low-friction PVD coatings

    Ingår i Surface and Coatings Technology, s. 14 14-22 22, 2003.

  • Artikel i tidskrift

    Svahn, Fredrik; Kassman Rudolphi, Åsa; Wallén, Erik

    The influence of surface roughness on friction and wear of machine element coatings

    Ingår i Wear, s. 1092-1098, 2003.

  • Artikel i tidskrift

    Wänstrand, Olle; Kassman Rudolphi, Åsa; Hogmark, Sture

    Design of low weight components: a theoretical approach

    Ingår i Surface Engineering, s. 93-97, 2002.

  • Artikel i tidskrift

    Gunnars, J; Wiklund, U

    Determination of growth-induced strain and thermoelastic properties of coatings by curvature measurements

    Ingår i Materials Science and Engineering A, s. 7-21, 2002.

  • Konferensbidrag

    Nilsson, D; Coronel, E; Wiklund, U

    Effects of substrate bias polarity on tribological a-C:Ta coatings

    Ingår i AUSTRIB ´02, Perth, 2002.

  • Konferensbidrag

    van, Dijk P; Kassman Rudolphi, Åsa; Klaffke, D

    Investigations on electrical contacts subjected to fretting motion

    Ingår i ICEC - 21st Int. Conf. on Electrical Contacts, Zurich, 2002.

  • Artikel i tidskrift

    Wänstrand, Olle; Schwarzer, N.; Chudoba, T.; Kassman Rudolphi, Åsa

    Load-carrying capacity of Ni-plated media in spherical indentation: experimental and theoretical results

    Ingår i Surface Engineering, s. 98-104, 2002.

  • Konferensbidrag

    Svahn, F; Kassman Rudolphi, Åsa

    Sliding wear and rolling contact fatigue of rough low friction coatings

    Ingår i Frontiers in Tribology, 2002.

  • Artikel i tidskrift

    Crossley, A; Johnston, C; Hutchings, I M; Myhra, S et al.

    Surface treatment for galling protection of titanium alloys: characterization by surface-specific electron and Raman spectroscopies

    Ingår i Thin Solid Films, s. 224-230, 2002.

  • Konferensbidrag

    Svahn, Fredrik; Kassman Rudplphi, Åsa; Wallén, Erik

    The influence of surface roughness on friction and wear of machine element coatings

    2002.

  • Konferensbidrag

    Svärd, L; Kassman Rudolphi, Åsa; Hogmark, Sture

    Tribological properties of brush plated coatings

    Ingår i 2nd ASIATRIB International Conference, Seoul, October 21-23, 2002: Proceedings, s. 171-, 2002.

  • Konferensbidrag

    Hammam, T; Kassman, Rudolphi Åsa; Ignberg, L

    Friction, wear and electric properties of lubricated tin-coated contact terminals

    Ingår i Proc. 34th Annual Connector & Interconnection Technology Symp., Anaheim, CA, USA, Oct. 1-3, 2001.

  • Kapitel i bok, del av antologi

    Hogmark, S; Jacobson, S; Larsson, M; Wiklund, Urban

    Mechanical and tribological requirements and evaluation of coating composites

    Ingår i Modern Tribology Handbook, s. 931-960, 2001.

  • Artikel i tidskrift

    Wänstrand, Olle; Larsson, M; Kassman Rudolphi, Åsa

    An experimental method for evaluation of the load carrying capacity of coated aluminium: the influence of coating stiffness, hardness and thickness

    Ingår i Surface & Coatings Technology, s. 107-113, 2000.

  • Konferensbidrag

    Zheng, Jie; Ekström, Thommy C.; Axén, Niklas; Kassman Rudolphi, Åsa et al.

    Carbide-metal phase interpenetrated double skeleton microstructures

    Ingår i 24th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures, 2000.

  • Artikel i tidskrift

    Wiklund, U; Nordin, M; Wänstrand, O; Larsson, M

    Evaluation of a flexible physical vapor deposited TiC-C coating system

    Ingår i Surface & Coatings Technology, s. 154-161, 2000.

  • Konferensbidrag

    Kassman Rudolphi, Åsa

    Fretting degradation of PVD coated copper and aluminium

    Ingår i NORDTRIB 2000, s. 481-, 2000.

  • Konferensbidrag

    Kassman, Rudolphi Åsa

    Fretting testing of electrical contacts at small displacement amplitudes: Experiences from a BriteEuram project

    Ingår i Proc. 20. International Conference on Electrical Contacts (ICEC), Stockholm, 06/2000, s. 471-476, 2000.

  • Artikel i tidskrift

    Engqvist, Håkan; Wiklund, Urban

    Mapping of mechanical properties of WC-Co using nanoindentation

    Ingår i Tribology letters, s. 147-152, 2000.

  • Artikel i tidskrift

    Wänstrand, Olle; Larsson, M.; Kassman Rudolphi, Åsa

    Mechanical and tribological properties of vapour deposited low friction coatings on Ni plated substrates

    Ingår i Tribology International, s. 737-742, 2000.

  • Artikel i tidskrift

    Gåhlin, Rickard; Bjorkman, Henrik; Rangsten, Pelle; Jacobson, Staffan

    Designed abrasive diamond surfaces

    Ingår i WEAR, s. 387-394, 1999.

  • Artikel i tidskrift

    Nordin, M; Herranen, Merja; Hogmark, Sture

    Influence of lamellae thickness on the corrosion behaviour of multilayered PVD TiN CrN coatings

    Ingår i THIN SOLID FILMS, s. 202-209, 1999.

  • Artikel i tidskrift

    Wiklund, U; Gunnars, J; Hogmark, S

    Influence of residual stresses on fracture and delamination of thin hard coatings

    Ingår i Wear, s. 262-269, 1999.

  • Artikel i tidskrift

    Berger, M; Wiklund, U; Eriksson, M; Engqvist, H et al.

    The multilayer effect in abrasion: optimising the combination of hard and tough phases

    Ingår i Surface & Coatings Technology, s. 1138-1144, 1999.

  • Artikel i tidskrift

    Herranen, Merja; Wiklund, U; Carlsson, Jan-Otto; Hogmark, S

    Corrosion behaviour of Ti/TiN multilayer coated tool steel

    Ingår i SURFACE & COATINGS TECHNOLOGY, s. 191-196, 1998.

  • Artikel i tidskrift

    Wiklund, U; Bromark, M; Larsson, M; Hedenqvist, P et al.

    Cracking resistance of thin hard coatings estimated by four-point bending

    Ingår i Surface and coatings technology, s. 57-63, 1997.

  • Artikel i tidskrift

    Kassman Rudolphi, Åsa; Jacobson, Staffan

    On the use of ceramic PVD coatings to replace metallic coatings in electrical contacts.

    Ingår i Surface & Coatings Technology, s. 270-278, 1997.

  • Artikel i tidskrift

    Kassman Rudolphi, Åsa; Jacobson, Staffan

    Stationary loading, fretting and sliding of silver coated copper contacts: Influence of corrosion films and corrosive atmosphere

    Ingår i Tribology International, s. 165-175, 1997.

  • Konferensbidrag

    Kassman Rudolphi, Åsa; Jacobson, Staffan

    The contact resistance of rolling silver coated copper contacts

    Ingår i Proc. 43rd IEEE Holm Conf. on Electrical Contacts, s. 33-40, 1997.

  • Artikel i tidskrift

    Hollman, P; Hedenqvist, P; Hogmark, S; Stenberg, G et al.

    Tribological evaluation of thermally activated CVD diamond-like carbon (DLC) coatings

    Ingår i SURFACE & COATINGS TECHNOLOGY, s. 230-235, 1997.

  • Artikel i tidskrift

    Kassman Rudolphi, Åsa; Jacobson, Staffan

    Gross plastic fretting - examination of the gross weld regime.

    Ingår i Wear, s. 255-264, 1996.

  • Artikel i tidskrift

    Kassman Rudolphi, Åsa; Jacobson, Staffan

    Gross plastic fretting - mechanical deterioration of silver coated electrical contacts.

    Ingår i Wear, s. 244-254, 1996.

  • Konferensbidrag

    Kassman Rudolphi, Åsa; Jacobson, Staffan

    The role of gross plastic fretting in serviceability and deterioration of power contacts

    s. 352-362 1996.

  • Artikel i tidskrift

    Kassman Rudolphi, Åsa

    Tribologi i elektriska kontakter: en problempresentation

    Ingår i Tribologia, s. 16-36, 1996.

  • Doktorsavhandling, sammanläggning

    Tribology of electrical contacts

    deterioration of silver coated copper Kassman Rudolphi, Åsa

  • Konferensbidrag

    Kassman Rudolphi, Åsa; Imrell, T; Björkman, C; Jacobson, S

    Conduction through corrosion films on silver plated copper in power contacts

    Ingår i Proceedings of the Forty-First IEEE Holm Conference on Electrical Contacts, s. 124-134, 1995.

  • Konferensbidrag

    Imrell, T; Sjövall, R; Kassman, Åsa

    The composition of the silver coating strongly influences the stability of stationary electrical contacts

    1994.

  • Artikel i tidskrift

    Kassman, Åsa; Jacobson, Staffan

    Surface damage, adhesion and contact resistance of siler coated plated copper contacts subjected to fretting motion

    Ingår i Wear, s. 227-230, 1993.

  • Artikel i tidskrift

    Kassman, Åsa; Jacobson, Staffan; Erickson, Lynn; Hedenqvist, Per et al.

    A new test method for the intrinsic abrasion resistance of thin coatings

    Ingår i Surface & Coatings Technology, s. 75-84, 1991.

  • Artikel i tidskrift

    Hedenqvist, Per; Olsson, Mikael; Kassman, Åsa; Wallen, Per et al.

    How TiN coatings improve the performance of high speed steel cutting tools.

    Ingår i Surface & Coatings Technology, s. 243-256, 1990.

  • Manuskript (preprint)

    Larsson, Elin; Olander, Petra; Staffan, Jacobson

    Boric acid as fuel additive: Friction experiments and reflections around its effect on fuel saving

  • Manuskript (preprint)

    Ajaxon, Ingrid; Holmberg, Anders; Öhman-Mägi, Caroline; Persson, Cecilia

    Compressive fatigue properties of a high-strength, degradable calcium phosphate bone cement – influence of porosity and environment

  • Artikel i tidskrift

    Heldin, Magnus; Wiklund, Urban

    Defibration mechanisms and energy consumption in the grinding zone – a lab scale equipment and method to evaluate groundwood pulping tools

  • Manuskript (preprint)

    André, Benny; Kassman-Rudolphi, Åsa; Wiklund, Urban

    Enhancing silver through embedding of fullerene like WS2 for sliding electrical contacts

  • Artikel i tidskrift

    Heldin, Magnus; Wiklund, Urban

    Evaluation of well-defined tool surface designs for groundwood pulping

  • Manuskript (preprint)

    Heldin, Magnus; Wiklund, Urban

    Influence of alignment between extended tool ridges and the wood structure on the defibration mechanisms in groundwood pulping experiments

  • Artikel i tidskrift

    Heldin, Magnus; Wiklund, Urban

    Influences of load and temperature on groundwood pulping with well-defined tools

    Ingår i Wear

  • Artikel i tidskrift

    Carlsson, Jenny; Heldin, Magnus; Isaksson, Per; Wiklund, Urban

    Investigating tool engagement in groundwood pulping – finite element modelling and in-situ observations at the microscale

  • Artikel i tidskrift

    Westlund, Viktoria; Heinrichs, Jannica; Jacobson, Staffan

    Investigation of material transfer in sliding friction-topography or surface chemistry?

    Ingår i Tribology International

  • Manuskript (preprint)

    André, Benny; Hollman, Patrik; Wiklund, Urban

    Nanoindentation on micro pillars for determination of intrincic hardness and residual stress in coatings deposited on complex geometries

  • Artikel i tidskrift

    Westergård, R; Svahn, F; Wiklund, Urban

    Novel load carrying layers to support low friction PVD coatings

    Ingår i Surf. Coat. Technol.

  • Manuskript

    Svahn, Fredrik; Kassman Rudolphi, Åsa

    Running-in ability of a carbon coating sliding against itself or steel in a lubricated contact

  • Manuskript

    Svahn, Fredrik; Kassman Rudolphi, Åsa; Stavlid, Nils

    Running-in ability of carbon coatings with different Cr-composition at the surface

  • Manuskript (preprint)

    Lind, Jonna; Kassman Rudolphi, Åsa

    Surface and subsurface deformation of polyamide and poly-ether-ether-ketone composites sliding against steel cylinders

  • Manuskript

    Nilsson, Daniel; Stavlid, Nils; Carlsson, Mattias; Wiklund, Urban et al.

    The role of aluminium additions in the oxidation and wear of a TaC:C low-friction coating

  • Manuskript

    Nilsson, Daniel; Stavlid, Nils; Lindquist, Mattias; Wiklund, Urban et al.

    The role of aluminium additions in the oxidation and wear of TaC:C low-friction coating

  • Artikel i tidskrift

    Lindquist, M.; Wilhelmsson, O.; Jansson, U.; Wiklund, U.

    Tribofilm formation from TiC and nanocomposite TiAlC coatings, analysis by means of FIB and TEM

  • Manuskript (preprint)

    Elo, Robin; Jacobson, Staffan

    Tribofilm formation on combustion engine valves ­– influence of additive content in the oil